Product Highlights

• 99.97% efficient, long-life HEPA filter removes particles as small as 0.3 microns
• Standard MERV 7 pre-filter
• Nominal Air Flow:
  • 687 CFM in Air Scrubber mode
  • 500 CFM in negative air mode (0.45 in. w.g. ESP)
• Meets or exceeds the ASHRAE Standard 170: Ventilation of Health Care Facilities
• HEPA filter rack and sealing design meet air leakage requirement
• Comes with a heavy duty, yet quiet motor
• Vertical design for smaller footprint
• Portable and adaptable to nearly any appropriately-sized location
• Heavy-duty, lockable casters for easy transport
• Red lighted indicator to alert user when filters are overloaded
• Green on/off switch illuminates to verify when running
• 3-second motor start delay
• 3 meter long power cord with strain relief
• Exhaust transition plate to standard 10-inch round (005 size)
• Galvanized steel, pre-painted cabinet is fully insulated
• 230V / 50 Hz / 1-Ph
• Additional Product Details Pre-Installed Filters
  • The Carrier OptiClean™ ships with two filters pre-installed for your convenience: a minimum MERV 7 pre-filter and a HEPA filter
    • The minimum MERV 7 pre-filter recommended replacement is 60-90 days and should be available locally*
    • The long-life HEPA filter provides approximately 40,000 hours of operation, or four years, under normal operation and maintenance*

  *Applies to negative air machine applications only. Filter life in air scrubber applications would be reduced.

  Multi-Function Control Panel
  • On/Off Switch – A green on/off switch illuminates when the unit is on and operating
  • Filter Alert – A red light illuminates when it is time to check and/or replace one or both of the unit’s filters
  • Pressure Indicator – Compares room/ambient pressure versus internal pressure on the back side of the HEPA filter. Sets off the red indicator light when the filters are dirty
  • 5 selectable motor speeds for wide range of airflow
  Additional Features
  • Locking casters and round duct transition assembly are shipped with every unit

Product Highlights

• 99.97% efficient, long-life HEPA filter removes particles as small as 0.3 microns
• Standard MERV 7 pre-filter
• Nominal Air Flow:
  • 687 CFM in Air Scrubber mode
  • 500 CFM in negative air mode (0.45 in. w.g. ESP)
• Meets or exceeds the ASHRAE Standard 170: Ventilation of Health Care Facilities
• HEPA filter rack and sealing design meet air leakage requirement
• Comes with a heavy duty, yet quiet motor
• Vertical design for smaller footprint
• Portable and adaptable to nearly any appropriately-sized location
• Heavy-duty, lockable casters for easy transport
• Red lighted indicator to alert user when filters are overloaded
• Green on/off switch illuminates to verify when running
• 3-second motor start delay
• 3 meter long power cord with strain relief
• Exhaust transition plate to standard 10-inch round (005 size)
• Galvanized steel, pre-painted cabinet is fully insulated
• 230V / 50 Hz / 1-Ph
• Additional Product Details Pre-Installed Filters
  • The Carrier OptiClean™ ships with two filters pre-installed for your convenience: a minimum MERV 7 pre-filter and a HEPA filter
    • The minimum MERV 7 pre-filter recommended replacement is 60-90 days and should be available locally*
    • The long-life HEPA filter provides approximately 40,000 hours of operation, or four years, under normal operation and maintenance*

  *Applies to negative air machine applications only. Filter life in air scrubber applications would be reduced.

  Multi-Function Control Panel
  • On/Off Switch – A green on/off switch illuminates when the unit is on and operating
  • Filter Alert – A red light illuminates when it is time to check and/or replace one or both of the unit’s filters
  • Pressure Indicator – Compares room/ambient pressure versus internal pressure on the back side of the HEPA filter. Sets off the red indicator light when the filters are dirty
  • 5 selectable motor speeds for wide range of airflow
  Additional Features
  • Locking casters and round duct transition assembly are shipped with every unit