Bucket Elevator

Listing ID #4067406

A Bucket Elevator can elevate a variety of bulk materials from light to heavy and from fine to large lumps.

A centrifugal discharge elevator may be vertical or inclined. Vertical elevators depend entirely on the action of centrifugal force to get the material into the discharge chute and must be run at speeds relatively high. Inclined elevators with buckets spaced apart or set close together may have the discharge chute set partly under the head pulley. Since they don’t depend entirely on the centrifugal force to put the material into the chute, the speed may be relatively lower.

Nearly all centrifugal discharge elevators have spaced buckets with rounded bottoms. They pick up their load from a boot, a pit, or a pile of material at the foot pulley.

The buckets can be also triangular in cross section and set close to on the belt with little or no clearance between them. This is a continuous Bucket Elevator. Its main use is to carry difficult materials at slow speed.

Early Bucket Elevators used a flat chain with small, steel buckets attached every few inches. Current construction uses a rubber belt with plastic buckets. Pulleys several feet in diameter are used at the top and bottom. The top pulley is driven by an electric motor.

Bucket Elevators have proven themselves for vertical transport of many and diverse bulk materials for decades. As a market leader, Devcon Group successfully established the belt bucket elevator technology in the market decades ago.

Belt Bucket Elevators were consistently developed in the past and enable the highest possible conveying capacities with maximum centre distances today.

Chain Bucket Elevators are the preferred conveying systems for the transport of hot bulk materials and coarse-grained materials. With its central chain bucket elevators, Devcon Group offers efficient and proven solutions even for the highest conveying capacities.