Polished Plain Plywood Flush Doors, Position : Commercial, Exterior, Interior

An ISO 9001:2015 Certified & AB-CAB (Accredited) Company

Key points of  Flush-Door

Flush Doors are dimensionally stable, durable, totally resistant to termites and borers and are 100% boiling water proof.

 Hardwood core veneers of full width, dimensions and thickness.Completely made from perfectly seasoned and chemically treated prime quality Hardwood timber.

Manufactured under strict quality control thereby meeting high level of perfection in specified tests like glue adhesion, knife, flexure, edge loading, impact resistance, screw withdrawal holding.

Hot pressed with extra thick 'A' Quality face veneers.

Our well-maintained and capacious warehouse helps us in managing systematically arrangement of goods and meeting massive requirements of the clients at a time. We have hired experienced quality auditors who stringently check the raw materials against varied quality parameters before procurement. Thus, we ensure quality products at buyer's end. We present attractive Plywood Flush Doors with innovative designs. Our Plywood Flush Doors add to the decor of any commercial place or residential place. These Plywood Flush Doors come in different dimensions as per the requirements and specifications provided by clients.

Usage

Flush doors are used for bed room, drawing room, bath room etc.

Value for money

High resistance to borer and termite

Weather resistant

High Density strong doors

Size
Thickness- 30mm, 32mm and 35mm

Technical Specifications

Prescribed Test

Values for Conformity

Observed Value

End Emmersion Test

No delamination

No delamination

Glue Adhesion test

No delamination

No delamination

Knife test 

Minimum pass standard

Pass

Impact Indentation

No cracking, tearing or 
delamination. 
Depth of indentation

0.13mm
<0.2mm

Slamming

No visible damage 
after 50 drops

No damage

Buckling (deflection in mm) 
After 5 mts of 40 Kg 
loading 15 mts 
after load removal

No deterioration 
Initial deflection not greater 
than 50mm. 
Residual deformation after 
15 minutes of unloading 
not greater than 5mm.

No deterioration 
34mm
2.91mm
3.16

Edge loading 
(deflection in mm) 
After 15 mts of 100 Kg 
loading 3 mts after load 
removal 
Lateral buckling

Deflection at max load not 
greater than 5mm. 
Residual deflection 
after removal of load not 
greater than 0.5mm 
Not more than 2mm. 
during loading 
No residual 
buckling after load removal

4.2mm
0.48mm
No lateral buckling 
No residual buckling

Screw withdrawal strength
No damage

Not less than 10004
Surface condition: No visible 
damage  by determination or 
extra chhiping  off

1800N
No visible damage