Bright Bar

Ashtavinayaka Overseas Supplies is a full steel products export like nickel alloys Round Square Bright Bar duplex steel Round Square Bright Bar inconel Round Square Bright Bar, monel Round Square Bright Bar export india,

Range
3.17 mm to 350 mm Diameter

Form
Bright / Black / Forged in Round, Square & Hex.

Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430

 Grade: 2205 (UNS No. S31803), 2207 (UNS No. S32760)

Grade: 
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201),
Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500),
Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825),
Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625),
Inconel 601 (UNS No. N06601),
Hastelloy C 276 (UNS No. N10276),
Alloy 20 (UNS No. N08020),
Titanium (Grade I & II)

Grade:
UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500,
UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

We are able to produce and supply stainless steel round bars in a wide range of grades and sizes including 201, 416, 430, 431, 410, 303, 304/L, 310, 316/L, 316Ti, 321, 2205 (Duplex), 2507 (Super Duplex), 15-5PH and 17-4PH among others. Randhir-metal is a leading supplier of stainless steel round bars, stainless steel bright bars, and stainless steel threaded rod/bar with ex-stock supply of all major sizes and grades.

Stainless Steel Round Bars, Angles, Channels, Flat Bars, Square Bars, Hex Bars, Bright Bars – Grades

200 Series Stainless Steel: 201, 202

300 Series Stainless Steel: 301, 302, 303, 304, 304L, 310, 316, 316L, 317L, 321, 347

400 Series Stainless Steel: 409, 410, 416, 420, 430, 431, 446

Stainless Steel PH Grades: 15-5PH, 17-4PH

Duplex Stainless Steels: Duplex (2205), Super Duplex (2507), F51, F52, F53, F60

Stainless Steel Round Bars, Angles, Channels, Flat Bars, Square Bars, Hex Bars, Bright Bars – Stock, Supply Range

Specification: EN, DIN, JIS, ASTM, BS, ASME, AISI

Forging Standard Specification: ASTM A182, ASME SA182

Stainless Steel Round Bars: Outside Diameter in the range of 4mm to 500mm

Stainless Steel Bright Bars: Outside Diameter in the range of 4mm to 100mm

Stainless Steel Hex Bars: 18mm – 57mm (11/16″ to 2-3/4″)

Stainless Steel Angles: 25mm x 25mm (1” equal angle) to 100mm x 100mm (4” equal angle) in thickness range of 2mm to 12mm

Stainless Steel Square Bars: 18mm – 47mm (11/16″ to 1-3/4″)

Stainless Steel Flats: 1/2” to 10” in thickness range of 2mm to 150mm, Custom Size Stainless Steel Flats available

Length: 1 to 6 Meters, Custom Cut Lengths

Marking: Heat No., Product Grade, Specification

Supply Condition: Solution Annealed, Soft Annealed, Solution Annealed, Quenched & Tempered, Ultrasonic Tested, Free from Surface Defects and Cracks, Free from Contamination

Finish: Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

Test Certificates: As per EN 10204 3.1, PMI Testing, Test Reports from NABL Approved Laboratories, 3.2 Certification by Third Party Inspection Agencies, PMI Reports, Ultrasonic Test Reports, X-Ray Reports

Specialized Products: Stainless Steel Rods, Stainless Steel Hex Bars/Rods, Stainless Steel Channels, Stainless Steel Angles, Stainless Steel Round Bars, SS Hot Rolled Bars, Stainless Steel Bright Bars, Stainless Steel Flats, Stainless Steel Flat Bars, Stainless Steel Rectangular Bars, SS Round Bars Supplier, Stainless Steel Threaded Rod/Bars, 410 Stainless Steel Bar, 303 Stainless Steel Rod, 416 Stainless Steel Bar, 446 Stainless Steel Bars, 316 Stainless Steel Threaded Rod, 304 Stainless Steel Round Bar, 316/316L Stainless Steel Round Bar, 431 Stainless Steel Round Bar, 422 Stainless Steel Bar, 15-5PH Stainless Steel Bar, 17-4PH Stainless Steel Rod, Stainless Steel Profiles, Stainless Steel U Channels

Products are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All stainless steel bar products are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on our products.

At Randhir Metal, all stainless steel round bars and stainless steel flats are subject to strict inspection at each stage starting from material purchasing to product dispatch. They are visually examined for conformity to ASTM, ASME, MSS, DIN, EN, and JIS codes and standards. Upon request, official certified Inspection Agencies can be called in to witness the material reports, dimensions and quality conformity of products.

Test Certificates: Manufacturer Test Certificate as per EN 10204 / 3.1, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report