Borewell Submersible Pumpsets

Listing ID #2079002

SAER Submersible Pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SAER submersible pumps are ideal for a wide variety of applications.

Radial Submersible Electric Pumps Operation Condition

Operation Condition

• Max Head  : 955 M (3133 ft.)
• Max Capacity : 210m3/ Hr
• Pumps size : 4” 6” 8” 10”
• Temp of Pumped Liquid  : 0^oC to 40^oC
• RPM  : 2900
• Maximum immersion depth : 200 m under liquid level
• Max pressure : 22 bar
• Grain size of  silt : 200gm/m³

Pumps Construction

• Impellers : Polycarbonate loaded with fiber glass.
• Diffusers :  Noryl (techno polymer) loaded with fiber glass.
• Shaft : AISI431 stainless steel (on request, AISI316), with grooved profile.
• Outlet and suction support : Brass or coated carbon steel (on request stainless steel AISI304)
• External shell : Stainless steel AISI304.

Other Materials Available on offer : Carbon Steel, Brass, SS-316, SS-304, Noryl, Cast Iron

Features

•  Complete unit of pump with electric motor oil bath range CL95
•  Hydraulic part to be connected with 4” submersible motors with coupling following NEMA MG1-18.388
• The FS 98 series uses axial sliding floating impellers, which avoid the jam up of the pump even with the presence of sand.
• Outlet complete with non-return ball valve.
• Driving bushings in anti-wear rubber.
• Components realized with particular materials which assure a high wear resistance.
• This pump is an ideal solution in pumping water with suspended sand particles up to 300 g/m^3.

Application

• Suitable for lifting, pressurising and distribution in
• Civil and industrial installations
•  Autoclave and cistern inlets
• Washing plants
•  Irrigation systems
• Draws from wells of min. diameter of 104 mm, tanks or natural basins.

Installation

• Vertical / horizontal (depending on power).
• Special Versions
• Range XFS98 with inlet and outlet in stainless steel AISI304 precision castings.

Semi-axial Submersible Electric Pumps

Operation Condition

• Max Head : 388M (1273ft)
• Max Capacity  : 725m3/hr
• Pump Size   :  6”, 8”, 10”, 12”, 14”
• Temp of Pumped Liquid : 0^oC to 35^oC
• Frequency : 50 Hz
• Rpm :  2900
• Maximum immersion depth : 300 m under liquid level
• Max pressure : 45 bar
• Grain size silt  :  300gm/m³

Pumps Construction

• Impellers  : Cast iron EN-GJL-250 (brass for model K and X) or FeG450 steel.
• Diffusers :  Cast iron EN-GJL-250 or FeG450 steel.
• Shaft : AISI431 stainless steel, with grooved profile.
• Outlet : Cast iron EN-GJL-250 or FeG450 steel.
• Suction support : Cast iron EN-GJL-250 or FeG450 steel.

 Materials Available : Carbon Steel, Brass, SS-316, Duplex Steel, Cast Iron

Features

• Complete unit of pump with electric motor.
• SP hydraulic part to be connected with 4” submersible motors with coupling following NEMA MG1-18.388 or 6” submersible motors with coupling following NEMA MG1-18.401- 18.413
• Semi axial impellers.
• Outlet complete with non-return valve.
• Pump equipped with counter trust ring in anti-wear resin. Diffuser complete with wear ring in anti-wear rubber.
• Driving bushings in anti-wear rubber with metallic shell.
• Components realized with particular materials which assure a high wear resistance.

Installation  - Vertical.
Special Versions

• XS and XVS Series entirely made of stainless steel
• SB series made of marine bronze (up to max 25 bar)
• Different tensions
• Version for horizontal installation.

Application

• Suitable for lifting, pressurizing and distribution in
• Civil and industrial installations,
•  Autoclave and cistern inlets,
• Washing plants,
•  Irrigation systems.
•  Draws from wells of min. diameter of 158 mm, tanks or natural basins.