Boiler treatment chemicals

Listing ID #3536819

Formation of scale deposits is avoided initially by removing as much hardness from the make-up water as possible ( through water softener), and then by dosing Syn boiler water chemicals such as Scale preventive and polymer sludge conditioners viz; Syn-600, 601,602,603 range of chemicals. These Syn Boiler treatment chemicals ensure that any hardness Slipped-in boiler feed water is converted into a floating sludge, which can be removed by boiler blow down and so doesn’t form any hard scale on the heat transferring surface.
Similarly, Corrosion in low-pressure boilers can be affected by dissolved oxygen, acidity and excessive alkalinity. Syn Boiler Water treatment therefore should remove the dissolved oxygen and retains the boiler water with the appropriate pH and alkalinity levels. The oxygen content of water reduces with intensifying high temperature. it proves therefore that basically increasing the boiler feed water temperature, and allowing the oxygen plenty of chance to get-away, will suggestively decrease the threat of oxygen corrosion at boiler system. A correctly designed feed water container is consequently the primary protection in protecting the boiler from oxygen corrosion. The feed water tank temperature should be maintained at a minimum of 80°C. This could be attained by recollecting as much as hot condensate is possible and by steam injection at feed water tank. A feed temperature of 85–90°C is accepted, but the plant should evade increasing the temperature too high, since it will support other damage in the metallurgy of feed pump.