Electric Automatic Flange Ultrasonic Level Meter, For Industrial, Standard : Compact Type

           Forever Tech Manufacturing Flange Ultrasonic Level Meter in Tamilnadu Forever Tech Flange ultrasonic level meter is based on the Time-of-Flight principle. Ultrasonic Level Meter sensor emits ultrasonic pulses, the surface of the media reflects the signal and the sensor detects it again. The Time-of-Flight of the reflected ultrasonic signal is directly proportional to the distance travelled. With the known tank geometry, the level can be calculated. Manufacturing Flange Ultrasonic Level Meter in Coimbatore.

Forever Tech Flange Ultrasonic Level Meter Advantages

Non-contact, maintenance-free measurement.
Measurement unaffected by media properties, like dc value or density.
Calibration without filling or discharging.
Self-cleaning effect due to vibrating sensor diaphragm.

Forever Tech Flange ultrasonic level meter Application

              Forever Tech Flange Ultrasonic level meter with ultrasonic level sensors provides continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of the level sensors. Manufacturing Flange Ultrasonic Level Meter in India.

Forever Tech Flange Ultrasonic Level Meter Installation

1:Keep Ultrasonic Level Transmitter perpendicular to liquid.
2:The transducer should not be mounted too close to the tank wall, the bracket can cause strong false echoes
3:Mount the transducer away from the inlet to avoid false echoes.
4:The transducer should not be mounted too close to the tank wall, the build-up on the tank wall cause false echoes.
5:As is illustrated by the figure on the below, the transducer should be mounted on the top of guide tube to prevent the false echoes from turbulence and foam. The guide tube should come with a vent hole at top of the tube to allow the liquid vapor go out of the tube.
6: When you mount the transducer on the solid tank, the transducer must point to the tank outlet.