Company Information
Ask for more detail from the seller
Contact Supplierbio-x is the authorised channel partner for blood and fluid warmer from kewell medical technology.blood and fluid warmeris based on infra red technology. It warms blood and iv fluids in only 30 seconds to the desired temperature.
blood and fluid warmer can be used in all cases, by which hypothermia of the patient can be prevented through cold transfusions and infusion solutions. The intelligent control circuit of the device operates and deals with the temperature signal that is sent by high precision sensor and continually adjusts heating state, in order to rapidly keep the surface temperature of the heat exchanger at the set temperature.
at the same time, the heat is transferred into the flowing liquid in the tubing that is placed in the grooves of the heat exchanger, to increase the temperature of the liquid.
there are dual independent temperature protections inside the device to ensure the security of use. Blood and fluid warmer helps in keeping blood and fluids warm, between 37 - 42°c, delivering warm fluids to the patient at flow rates up to 5000 ml/hr by outperforming hotplate technologies in 91% of surgical procedures.
blood and fluid warmer is very easy to use, enabling the maximum safety to the patients. The device takes less time to install or setup giving outstanding performance for daily blood and fluid warming. Its cost effective feature gives an outstanding performance for daily use.
the warmer is easy to disconnect from a patient. The device has lower maintenance and operational cost. Ft 1800 & ft 800 comes with an external warming profile for better accuracy.
ft 1800 & ft 800 comes with an external warming profile for better accuracy.
Model | FT1800 | FT800 | QW3 |
Temperature Setting | 33-41°C | 39°C | 37°C ~ 42°C ( 0.1°C increments) |
Power Supply | AC 230 V / 50-60 Hz | AC 230 V / 50-60 Hz | AC 230 V / 50-60 Hz |
Power Consumption | Max. 120VA | Max. 120VA | Max. 80VA |
Type Of Protection Against Electric Shock | Class I | Class I | Class I |
Degree Of Protection Against Electric Shock | BF Applied Part, Defibrillation-Protected | BF Applied Part, Defibrillation-Protected | BF Applied Part, Defibrillation-Protected |
Defibrillation- | Protected | Protected | Protected |
Degree Of Protection Against Ingree Of Liquids | IPX2 | IPX2 | IPX1 |
Temperature Accuracy | ±1.0°C | ±1.0°C | ± 1°C |
Overheat Protection | 42°C/43°C | 42°C/43°C | 43 /45 /48±3 |
Low Temperature Alram | 32°C | 33°C | 36°C |
Warming Up Time | From 20°C to 36°C Approx 2min. | From 20°C to 36°C Approx 2min | From 20°C to 36°C Approx 2min |
Operating Mode | Continuous | Continuous | Continuous |
Dimensions | 85*65*175mm | 85*65*175mm | 85*65*175mm |
Weight | 1.20Kg | 1.20Kg | 0.7kg |
Warming Profile | Length 1400mm; Compatible to IV Tube 3.5-5.0mm O.D | Length 1400mm; Compatible to IV Tube 3.5-5.0mm O.D. | NA |