We are offering bitumen testing instruments, which are equipped with vertical pillar mounted on a base provided with leveling screws.
These instruments are used for the determination of the softening point of bitumen.
specifications:
rsi-212
• flow cup viscometer as per is : 3944 made of gunmetal and the orifice is made from stainless steel. A protective skirt is provided at the bottom of the cup to minimize the risk of damage to the orifice.
• flow cup no.2
• flow cup no.3
• flow cup no.4
• flow cup no.5 and 6
• accessories:
• stand with leveling screws.
Rsi-213
o bitumen sampler a strong metal vessel of about half litre capacity, the handle of which shall be attached by a means not adversely affected by hot bitumen. Is: 1201.
Rsi-214
o sampling tube made of metal. Tube suitable for sampling 200 ltrs. Drum. The rings are soldered to opposite sides o the tube at the upper end for convenience in holding it.
Rsi-215
o bitumen penetrometer hand is: 1203 bs 2000-49, astm d5, aashto t49. Consist of vertical pillar mounted on a base provided with leveling screws. The head, together with dial plunder rod and cone (or needle) slides on a pillar and can be clamped at any desired height. A rack and pinion & pointer assembly provides fine adjustment of needle or cone tip to sample.
O it incorporates a slipping clutch mechanism which makes reading of penetration, and subsequent resetting a simple and accurate operation. The dial is graduated in 400 110"' mm sub-divisions, and the red needle pointer against black figures makes for easy reading.
O supplied complete with one 50 gram weight, one 100 gram weight and one needle.
Rsi-216
 automatic bitumen penetrometer electrically operated with digital timer, penetration needle, 2 cups, weights 50 gram and 100 gram.
 accessories:
 penetrometer cone : made of gunmetal and is fitted with a hardened and ground detachable steel tip and a stem. Total moving weight is 150 + 0.01 gram.
 bitumen penetration kit : consists of pen

We are offering bitumen testing instruments, which are equipped with vertical pillar mounted on a base provided with leveling screws.
These instruments are used for the determination of the softening point of bitumen.
specifications:
rsi-212
• flow cup viscometer as per is : 3944 made of gunmetal and the orifice is made from stainless steel. A protective skirt is provided at the bottom of the cup to minimize the risk of damage to the orifice.
• flow cup no.2
• flow cup no.3
• flow cup no.4
• flow cup no.5 and 6
• accessories:
• stand with leveling screws.
Rsi-213
o bitumen sampler a strong metal vessel of about half litre capacity, the handle of which shall be attached by a means not adversely affected by hot bitumen. Is: 1201.
Rsi-214
o sampling tube made of metal. Tube suitable for sampling 200 ltrs. Drum. The rings are soldered to opposite sides o the tube at the upper end for convenience in holding it.
Rsi-215
o bitumen penetrometer hand is: 1203 bs 2000-49, astm d5, aashto t49. Consist of vertical pillar mounted on a base provided with leveling screws. The head, together with dial plunder rod and cone (or needle) slides on a pillar and can be clamped at any desired height. A rack and pinion & pointer assembly provides fine adjustment of needle or cone tip to sample.
O it incorporates a slipping clutch mechanism which makes reading of penetration, and subsequent resetting a simple and accurate operation. The dial is graduated in 400 110"' mm sub-divisions, and the red needle pointer against black figures makes for easy reading.
O supplied complete with one 50 gram weight, one 100 gram weight and one needle.
Rsi-216
 automatic bitumen penetrometer electrically operated with digital timer, penetration needle, 2 cups, weights 50 gram and 100 gram.
 accessories:
 penetrometer cone : made of gunmetal and is fitted with a hardened and ground detachable steel tip and a stem. Total moving weight is 150 + 0.01 gram.
 bitumen penetration kit : consists of pen