Automatic Voltage Stabilizer

Voltage fluctuation is a common phenomenon in our country. The industrial units which are running 24 hours, face the high and low voltage problem. 85% of industrial load is of motors. Electric motors draw considerably high current at high and low voltage. Further higher current affects the electric motors in different ways:
the higher current produces higher losses in electric motors, which causes premature failure of winding insulation.
It increases the losses of electric motors and other associated types of equipment.
This higher current of the electric motor requires the higher setting of overload relay to avoid frequent tripping of the motor. A higher setting of overload relay has very little safety margin against single phasing & mechanical faults.
With the installation of stabilizer, the higher current drawn by motor on account of voltage variation is eliminated. The overload relay can be set as per requirement of motor load, which will reduce the motor failure rate considerably.