To contain the growing carbon emissions due to vehicles discharge, use of (EVs) Electric Vehicles (2/3/4 Wheelers) is increasing.
The increase would have been rapid but for the cost of the electrical vehicles and issues related to battery re-charging. With the improvement in battery technology ( Li-ion / Li-polymer/li-iron phosphate batteries) this growth is expected to improve and the present high cost of these batteries is also expected to decrease with manufacture of larger volumes.
These Li based batteries weigh one third of the weight of comparable lead-acid batteries.
These have deep-cycle resistance which is up to ten times higher than in case of conventional batteries, it is vibration-resistant and can be installed in any position. The lithium based battery maintains its charge up to four times longer.
The standard battery packs being produced are a)for Two Wheeler Traction Battery [48/ 72V, upto-2.5 kwh], (b) for Three Wheeler Traction Battery [48/ 72V, upto 6 kwh]. In near future we will be producing packs for Four Wheeler Traction Battery [72V, upto-16/24 kwh]. We are prodcuing customised batteries also meeting the specific requirement of various vehicle models.

NMC / Li-iron phosphate battery packs being produced by us for electrical vehicles give desired mileage, less charging time and long life span. These batteries are being made with the proven quality standards. For these battery packs the cell spacing and load balancing are critical. Our high caliber technicians and the Battery Management System (BMS) being made by us is making these requirements possible, .
Features of our Automotive Batties

• Li ion Batteries : These batteries have a) high energy density, light weight, high capacity b) capable of 500 cycles, c) no memory effect, d) flat dischsarge rate voltage / stable power output.
• Li polymer batteries. : These batteries have a) high energy density, very safe b) exceptional reliability and cycle life of 500 c) low temperature discharge capability d) large number of form factors possible.
• Lithium iron phosphate batteries.: a) Very safe, no thermal runaway b) high discharge current capability c) better performance than Li-ion at 60 degree temp. d) capability of over 2000 cycles, 3+year shelf life e) enviromental friendly.
• Customized Smart Battery Pack : SMBus commuincation protocol b) fuel gauge integration c) cell balancing facility d) on board charging e) custom design molded enclosure e) intrinsically safe design.

To contain the growing carbon emissions due to vehicles discharge, use of (EVs) Electric Vehicles (2/3/4 Wheelers) is increasing.
The increase would have been rapid but for the cost of the electrical vehicles and issues related to battery re-charging. With the improvement in battery technology ( Li-ion / Li-polymer/li-iron phosphate batteries) this growth is expected to improve and the present high cost of these batteries is also expected to decrease with manufacture of larger volumes.
These Li based batteries weigh one third of the weight of comparable lead-acid batteries.
These have deep-cycle resistance which is up to ten times higher than in case of conventional batteries, it is vibration-resistant and can be installed in any position. The lithium based battery maintains its charge up to four times longer.
The standard battery packs being produced are a)for Two Wheeler Traction Battery [48/ 72V, upto-2.5 kwh], (b) for Three Wheeler Traction Battery [48/ 72V, upto 6 kwh]. In near future we will be producing packs for Four Wheeler Traction Battery [72V, upto-16/24 kwh]. We are prodcuing customised batteries also meeting the specific requirement of various vehicle models.

NMC / Li-iron phosphate battery packs being produced by us for electrical vehicles give desired mileage, less charging time and long life span. These batteries are being made with the proven quality standards. For these battery packs the cell spacing and load balancing are critical. Our high caliber technicians and the Battery Management System (BMS) being made by us is making these requirements possible, .
Features of our Automotive Batties

• Li ion Batteries : These batteries have a) high energy density, light weight, high capacity b) capable of 500 cycles, c) no memory effect, d) flat dischsarge rate voltage / stable power output.
• Li polymer batteries. : These batteries have a) high energy density, very safe b) exceptional reliability and cycle life of 500 c) low temperature discharge capability d) large number of form factors possible.
• Lithium iron phosphate batteries.: a) Very safe, no thermal runaway b) high discharge current capability c) better performance than Li-ion at 60 degree temp. d) capability of over 2000 cycles, 3+year shelf life e) enviromental friendly.
• Customized Smart Battery Pack : SMBus commuincation protocol b) fuel gauge integration c) cell balancing facility d) on board charging e) custom design molded enclosure e) intrinsically safe design.