Company Information
Ask for more detail from the seller
Contact SupplierAmpoules feed from the Infeed tray are received on an Infeed Feed worm then moves on Infeed Star Wheel. The Grippers picks up the Ampoules from Infeed Star Wheel and invert it in neck down position over washing needles and move along with the needle bar for Washing. On completion of a cycle, washed ampoules are again inverted to neck upward position and feed to output star wheel. Washed ampoules received from output star wheel can be collected on Output Tray or can be pushed to tunnel.
Model | DRAW – 120 | DRAW – 240 |
Output | 60 to 120 Ampoules/Minute | 120 to 240 Ampoules/Minute |
Ampoule Diameter | 9mm to 21.5mm | 9mm to 21.5mm |
Ampoule Height | 60mm to 140mm | 60mm to 140mm |
Power Specification | 4 HP, 3 Phase 50 Hz, 4 wire system | 4 HP, 3 Phase 50 Hz, 4 wire system |
Optional Accessories | PLC with HMI | PLC with HMI |
Aluminum Profile Cabinet | Aluminum Profile Cabinet | |
covering full machine | covering full machine | |
Utility | Air – 20 CFM Water – 200 to 500 Liter/Hour depend upon Ampoule size | Air – 20 CFM Water –200 to 500 Liter/Hour depend upon Ampoule size |
Water Tank & Pump | 3 Nos. each with 25 Liters Capacity & Centrifugal Pump | 3 Nos. each with 25 Liters Capacity &Centrifugal Pump |
Overall Dimension | 2050mm L x 2000mm W x 1210mm H | 2450mm L x 2000mm W x 1300mm H
|
,
Washing | Wash | |
1st | wash | Recycled Water(WFI) |
2st | wash | Compressed Air |
3rd | wash | DM water |
4th | wash | Compressed Air |
5th | wash | Water for Injection(WFI) |
6th | wash | Compressed Air |