HJ110  series  AMF  controllers  are  designed  to  control  the  Standard  AMF logic, prevalent

in the  power  generation  industry.  Because of its compact and powerful design, external wiring and components are reduced to the minimum, which enhances the overall performance of the AMF panels.

Basic  functions  of  Hj110  SP  and  HJ110  TP,  are  same,  except that HJ110 SP is meant for the single phase generators and HJ110 TP has necessary operational differences related to three phase generators. We also have BT110 series AMF CONTROLLERS, which are powerful and dedicated AMF controllers for Mobile / Telecom BTS Shelters, providing complete power management.  It comprises of Intelligent AMF controller for generator, Mains Supply Monitor, shelter Battery Monitor, Remote Fault alarms and much more.

Exclusive shelter battery monitoring avoids unnecessary running of generator. Generator running hours depend on the BTS Battery condition, hence, reducing overall running of generator, resulting in low maintenance and trouble free running for longer periods.

Features of HJ110 Series AMF Controllers

Displays Load On Mains/Gen, Voltage, Current, KVA, Frequency and Generator RPM

Displays individual AMF timers in progress, in countdown mode

Different messages related to Engine and Electrical faults are also available for the user

Built in Line Voltage Monitor (LVM) to ensure safety of electrical load connected to panel

Built in Genset Voltage Monitor, for the safety of generator and connected load

Built in timers for : Mains Wait Time, Cranking Wait, Cranking ON, Cranking OFF, Cranking Attempts, Stop Solenoid, Engine Idle Run, and are programmable at site

Built in Engine Safety for Low Oil pressure, High Coolant temperature and Start failure (Fail To Start)

Other inputs(on request): Low fuel level alarm, Emergency Stop, Fail to Stop Alarm, etc

Mode of operation: OFF, Auto, Manual and Program

Auxiliary contacts for Mains Contactor, Alternator Contactor, Start, Stop, Fail to Start, etc

Programmable parameters for Mains Wait Timer, Generator Wait Timer, Crank Wait Timer, Crank On Timer, Crank Off Timer, Crank Attempts, Stop Solenoid Timer, Idle Run Timer, Mains Over/Under Voltage, Generator Over/Under Voltage, Voltage Trip Time, CT rating

Password protection to prevent unauthorized access to program menu

HJ110  series  AMF  controllers  are  designed  to  control  the  Standard  AMF logic, prevalent

in the  power  generation  industry.  Because of its compact and powerful design, external wiring and components are reduced to the minimum, which enhances the overall performance of the AMF panels.

Basic  functions  of  Hj110  SP  and  HJ110  TP,  are  same,  except that HJ110 SP is meant for the single phase generators and HJ110 TP has necessary operational differences related to three phase generators. We also have BT110 series AMF CONTROLLERS, which are powerful and dedicated AMF controllers for Mobile / Telecom BTS Shelters, providing complete power management.  It comprises of Intelligent AMF controller for generator, Mains Supply Monitor, shelter Battery Monitor, Remote Fault alarms and much more.

Exclusive shelter battery monitoring avoids unnecessary running of generator. Generator running hours depend on the BTS Battery condition, hence, reducing overall running of generator, resulting in low maintenance and trouble free running for longer periods.

Features of HJ110 Series AMF Controllers

Displays Load On Mains/Gen, Voltage, Current, KVA, Frequency and Generator RPM

Displays individual AMF timers in progress, in countdown mode

Different messages related to Engine and Electrical faults are also available for the user

Built in Line Voltage Monitor (LVM) to ensure safety of electrical load connected to panel

Built in Genset Voltage Monitor, for the safety of generator and connected load

Built in timers for : Mains Wait Time, Cranking Wait, Cranking ON, Cranking OFF, Cranking Attempts, Stop Solenoid, Engine Idle Run, and are programmable at site

Built in Engine Safety for Low Oil pressure, High Coolant temperature and Start failure (Fail To Start)

Other inputs(on request): Low fuel level alarm, Emergency Stop, Fail to Stop Alarm, etc

Mode of operation: OFF, Auto, Manual and Program

Auxiliary contacts for Mains Contactor, Alternator Contactor, Start, Stop, Fail to Start, etc

Programmable parameters for Mains Wait Timer, Generator Wait Timer, Crank Wait Timer, Crank On Timer, Crank Off Timer, Crank Attempts, Stop Solenoid Timer, Idle Run Timer, Mains Over/Under Voltage, Generator Over/Under Voltage, Voltage Trip Time, CT rating

Password protection to prevent unauthorized access to program menu