Listing ID #3921211
Company Information
Ask for more detail from the seller
Contact SupplierÂ
Â
We are counted among the leading manufacturers and suppliers, high functional of Injection Moulding Machine. These are process for producing parts from both thermoplastic and thermosetting plastic materials.Injection Moulding Machine is best and most dependable way of improving the competence and working life of plastic machines. Injection Moulding Machine is the special screw mechanism preventing rubber strip rupture during feeding.Injection Moulding Machine is the widely used for manufacturing a variety of parts, from the smallest component to entire body panels of cars& etc. Injection Moulding Machine is Screw Type - 60 grams shot weight capacity. Injection Moulding machine consist of a material hopper, an injection ram or screw-type plunger, and a heating unit.Injection Moulding machineis also known as presses, they hold the molds in which the components are shaped.
Application of Injection Moulding machine :-Â
pm-50 | pm-85 | pm-100 | pm-125 | pm-185 | ||
plasticizing capacity | kg/hr | 40 | 45 | 45 | 65 | 100 |
screw diameter | mm | 35 | 40 | 40 | 45 | 55 |
injection stroke | mm | 145 + 10 | 145 + 10 | 145 + 10 | 170 | 210 |
calculated swept volume | cc. | 135 | 175 | 175 | 255 | 500 |
shot capacity (polystyrene)* | gms. | 121 | 157 | 157 | 230 | 450 |
injection pressure** | kg. /cm2 | 1322 | 1393 | 1393 | 1420 | 1490 |
rate of injection | cc/sec. | 142 | 173 | 173 | 190 | 250 |
L/d. Ratio | - | 18:1 | 16:1 | 16:1 | 16:1 | 16:1 |
screw speed | rpm | 10 to 250 | 10 to 250 | 10 to 250 | 10 to 250 | 10 to 250 |
number of heating zones | nos. | 4 | 4 | 4 | 6 | 6 |
hopper capacity | litres | 45 | 45 | 45 | 45 | 45 |
*Dependent on Material
mould clamping force | tons | 50 | 85 | 100 | 125 | 185 |
size of mould plate (h x v) | mm | 500 x 425 | 525x520 | 550 x 550 | 600 x 600 | 680 x 680 |
distance between tie bars (h xv) | mm | 350x250 | 350x350 | 360 x 360 | 400 x 400 | 450 x 450 |
minimum mould height with spacer | mm | 150 | 200 | 200 | - | 200 |
minimum mould height without spacer | mm | 250 | 300 | 300 | 200 | 300 |
mould opening stroke | mm | 300 | 350 | 350 | 550 | 600 |
max. Day light | mm | 550 | 650 | 650 | 750 | 900 |
hydraulic ejector : (optional)
stroke | mm | 70 | 110 | 110 | 110 | 140 |
ejector force | tons | 2. 75 | 2. 75 | 2. 75 | 2. 75 | 5. 7 |
hydraulic equipment :
pump operating pressure | kg. /cm2 | 130 | 140 | 140 | 140 | 140 |
oil tank capacity | litre | 300 | 350 | 350 | 500 | 500 |
Electric supply :
electric motor | hp | 10 hp | 15 hp | 15 hp | 20 hp | 25 hp |
heating capacity | kw | 5. 5 kw | 6 kw | 6 kw | 7 kw | 11 kw |
total connected load | kw | 16. 5 kw | 21 kw | 21 kw | 25. 5 kw | 33 kw |