ASYS Automatisierungssysteme GmbH Closed process buffer with two PCB magazines, VEGO Dynamic, MPS 100 Model: MPS100 Type: VEGO Dynamic Year of manufacture: 2013 General: The buffer combines the functionality of a magazine loader and a magazine unloader in one device. Incoming assemblies can be stored in a magazine and pushed out and released again on request from the next station. This type of device is equipped with two magazines and two magazine axes. This results in a high buffer capacity, three sorting criteria and the option of separate operation for the two magazines. The device can work independently of each other with the first magazine as a magazine feeder and with the second magazine as a loader. For continuous operation, the system is equipped with two transport lines below the magazine platforms. Options used: Fully automatic transport width adjustment with sensors Automatic transport width adjustment without sensors Magazine-specific clamping device Ultrasonic sensors Cooling function Hybrid equipment per segment Control function Good/bad sorting SMEMA interface Machine configuration: Transport height: 850 mm ± 50 mm Transport width max.: 460 mm Interface: SMEMA Transport direction: left to right Operating side: Front Fixed stop: Front Magazine size: Magazine length: 535 mm Magazine width: 530 mm Magazine height: 568 mm Slot spacing: 5 - 20 mm Magazine positions: 1 - 50 slots Magazine weight: max. 30 kg per magazine PCB format: PCB length: 70 to 460 mm PCB width: 50 to 460 mm PCB thickness: 0.5 to 4.5 mm Component clearance: +12 mm / -40 mm PCB weight: max. 3 kg Installation requirements: Electrical connection: 230 V / 115 V, 50 / 60 Hz, ± 10% Power supply: L1 + N + PE Power consumption: 0.75 kW Pneumatic connection: 6 bar Air consumption: 10 Nl/min Electrical data: Nominal voltage: 115/230V AC Frequency: 50/60Hz Current: 1.8/3.6A Nominal power: 0.38kW Compressed air: 6bar Flow rate: 5Nl/min Accessories: Documentation, circuit diagram folder, logbook