Arsenic Removal Filter

This filter removes the harmful arsenic acid dissolved in any in water and other liquid so that it does not cause any harmful effect on the health when consumed.
The WHO (World Health Organization) advices a maximum concentration of 10 ppb. Although arsenic may be found in surface water, groundwater is the main source of arsenic in water. Consequently, concentrations above 10 ppb may be found naturally in groundwater.
In groundwater arsenic exists as water-insoluble inorganic arsenic As-V anions or As-III molecules.

\

• Proven, state-of-the-art iron-oxide adsorption particles effectively remove BOTH types of Arsenic (III & V) from your water supply
• Iron-oxide used in POU and POE filter systems.
• Operates over a wide range of pH and water quality conditions
• Adsorptive media can operate in water quality where an RO system typically needs pretreatment
• No chemicals are added to your water (like chlorine) and it does not need to be regenerated like ion exchange systems
• No arsenic containing wastewater or large volumes of RO wastewater to discharge into your septic/leach fields.
• Used adsorption particles are easily replaced and are disposable with your regular household trash as non-hazardous solid waste (Maine & NH), check local regulations.
• No wasted water down the drain, like in an RO system
• Consistent arsenic removal performance
• Long adsorption life, up to several years (dependent on Arsenic concentrations and the household water usage rate, etc.)*
• Written arsenic removal performance guarantees
• Replacement of adsorption particles is based upon a pre-determined gallon rating for each particular system (POU or POE) and the raw water quality, which includes any pretreatment equipment
• Costs are similar or less than other systems but our POU requires very little maintenance, except for the periodic changing of the filter media/cartridge and it has an equal or better arsenic removal rate