Antique Seal

Single component Polymer modified Bituminous Waterproof Coating.

DESCRIPTION

Antique Seal – 115 is composed of viscous, polymer modified, mineral fillers, additives and water as a medium.
It is used as a waterproof & weatherproof membrane for concealed roofs, walls of the building structures because it forms relatively thick film and bonds firmly to cementitious surfaces, protects wood & timber and
prevents rust formation. Waterproofing is achieved by applying Antique Seal – 115 by brush or mop. It forms joint less and seamless membrane.

Areas of Application

Waterproofing of concealed roofs, wall, water tank, swimming pool,
*Corrosion protection for concrete from sea water.

Features & Benefits

* Waterproofing – Exceptionally good waterproofing.
*Ease of application – Cold applied, bituminous emulsion material. Easily applied by brush or mop.
* Durability – Forms relatively thick (1.2-1.5 mm) film providing excellent impermeable and durable membrane.
* Movement accommodation – Polymer modified hence forms flexible film. Also accommodates thermal stresses in slab due to variation in temperature.
* Reinforcement – Higher reinforcement can be induced with polyester fibre sheet between the coats.
* Self priming – No separate or additional primer is required.

Method of Application
1 SURFACE PREPARATION
*Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc.
*Mechanical means such as wire brushing & shot blasting can be used.
*Finally vacuum cleaning of all loose solids and liquids can be done if required.
*All surface cracks up to 5 mm width should be filled up with Antique Non Shink Crack-x.
Cracks more than 5 mm and all separation gaps should be filled up with Antique Flexi Bond URP Modified Adhesive as specified.

2 APPLICATION
* Apply Three coats directly by brush or mop and dilute Antique Seal – 115 with three part of water & one part of Antique Seal – 115 powder.
* Apply 2nd & 3rd coat in gapes of two or three hours.

3 CLEANING
Tools & equipments should be cleaned with potable water immediately after use. Cured material can be cleaned by scrapping