Aluminum Checker Plate Sheet, Width : 812 Mm – 1650 Mm

Product Details

TypeNon pickled / pickled
Width812 mm – 1650 mm
Length2000 mm – 4000 mm
TemperO, F, H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H36, H38, H111, H112, H321, T3, T4, T5, T6, T7, T351, T451, T651, T851
ColorSilver, black, yellow, red.
Thickness0.5 – 12.7 mm
Bar PatternDiamond, Five bar(quintet), single bar, two bar (duet), high grip
Aluminum Plate CoatingPVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating
Bar height0.2 mm, 0.5 mm, 1 mm, 1.5 mm
Alloys1050 / 1060 / 1070 / 1100 / 1200 / 1350 / 3003 / 3004 / 3105 / 5005 / 5052 / 5754 / 5083
Panel sizeMax. 4′ × 10′ (usually is 1′ × 1′, 1′ × 2′, 1′ × 4′, 1′ × 8′, 2′ × 2′, 2′ × 4′, 2′ × 8′, 4′ × 4′, 4′ × 8′, 4′ × 10′)
Alloy1000 Series, 3000 Series, 5000 Series, 6000 Series, 8000 Series.

Steel Type, Shape, Application, Grade, Specification & Class

TYPE	SHAPE	APPLICATION	GRADE	SPECIFICATION	API CLASS
1 – A	Plate	Plates for minor secondary steel in top side, deck plating, toe plates, coaming angles, etc. Building Wall, Building Floor and Roofing. Plates *grating (from cellar Deck & upwards)	250	ASTM – A 36 / IS 2062:E250 Quality – B/C	C
1 – B	Plate	Plates for rolling tubular for secondary steelwork, Stiffeners. Plates for profiling for building module	250	ASTM – A –36 / IS 2062 E250 Quality – C	C
1– C	Rolled section	Steel sections with a depth up to 300 mm and used as secondary members. (Including angles, channels, etc.).	250	ASTM – A –36 / IS 2062 E250 Quality – C	C
1 –D	Tubular	Seamless tubular up to 406 mm (16″) diameter for substructure braces, truss braces and chords for substructure and topside deck, bridge braces. *handrail & ladders (from cellar deck & upwards)	250	API-5L-Grade B/ ASTM-A-106 Grade B	B/C
2 – B	Plates	Non-through thickness applications less than 75 mm thick involving tubular above 406 mm diameter for primary steel throughout the structure, like Jacket legs/skirt sleeves, Deck truss, Deck legs other than joint cans, barge bumpers and helpdesk plating, plate girder, shim plates, bridge braces, Stiffeners, etc.	350	ASTM-A-131-DH36 / EN 10025- S355-J2G3	A
2 –C	Rolled Section	For applications of Primary and major secondary steelwork where rolled sections are to be used with a depth above 300 mm	350	ASTM-131-AH36 EN 10025- S355-J0G2	B