Dry Heat Sterilizer

Listing ID #4572824

Get Latest Price

Insulation Wall125mm (t) Mineral Wool. A grade mineral wool insulation to optimize heat effectiveness and stop heat loses.
FinishingAll stainless steel components buffed to matt finish.
Control panelMotor Starter, Contactors, Rotary Switches, Indicating lights for heating & Cooling cycle and phase indicating lights.
TrolleyFabricated from AISI SS 316 Quality angles & flats with ‘U’-Grooved Stainless Steel wheels.
Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

View More Details

Product Details

Insulation Wall 125mm (t) Mineral Wool. A grade mineral wool insulation to optimize heat effectiveness and stop heat loses.
Finishing All stainless steel components buffed to matt finish.
Cooling Coils Crimped Finned Tubes with headers, S.S. 304 Quality to speed up cooling cycle.
Doors Two Doors, one opening into the sterile room and the other into the Non-sterile room. The doors are lined with silicon rubber for sealing. The door in the sterile room is claded with 16 gauge AISI SS 304 sheet.
Scanner A six point Digital Scanner is incorporated, with facility of Hold & Scan at all six points.
Air recirculation A 2 H.P. 1440-RPM motor drives the impeller. Air enters the Chamber through perforations provided passes horizontally over the charge and is re-circulated.
Control panel Motor Starter, Contactors, Rotary Switches, Indicating lights for heating & Cooling cycle and phase indicating lights.
Transfer trolley Fabricated from S.S. 304 Quality Angles & flats with castor wheel for sterile & Non-sterile room.
Air recirculation A 2 H.P. 1440-RPM motor drives the impeller. Air enters the Chamber through perforations provided passes horizontally over the charge and is re-circulated.
Panel Board Consists of: Ammeters, Voltmeter, Voltmeter switch, HRC fuses & Circular chart Recorder
Interlocking To maintain the barrier between the sterile and non-sterile room, both the doors are pneumatically interlocked. The pneumatic system consists of pneumatic Cylinders, solenoid valves and flow control valves.
Control panel Motor Starter, Contactors, Rotary Switches, Indicating lights for heating & Cooling cycle and phase indicating lights.
Scanner A six point Digital Scanner is incorporated, with facility of Hold & Scan at all six points.
Fan Dynamically balanced fan provided for hot air circulation to achieve uniform temperature
Trolley Fabricated from AISI SS 316 Quality angles & flats with ‘U’-Grooved Stainless Steel wheels.
Fan Dynamically balanced fan provided for hot air circulation to achieve uniform temperature
Exhaust damper Controlled by solenoid valve and is opened during the initial heat-up, shuts off and re-opens during cooling cycle.
Temperature Recorder A, 1 point Circular Chart recorder is installed with chart Dia. 8”
Interlocking To maintain the barrier between the sterile and non-sterile room, both the doors are pneumatically interlocked. The pneumatic system consists of pneumatic Cylinders, solenoid valves and flow control valves.
Temperature Control & Timer A combined Electronic Digital Controller & Timer is installed. ±2ºC., one probe centrally mounted.
Temperature Up to 250°C
Exhaust damper Controlled by solenoid valve and is opened during the initial heat-up, shuts off and re-opens during cooling cycle.
Cooling Coils Crimped Finned Tubes with headers, S.S. 304 Quality to speed up cooling cycle.
Temperature Control & Timer A combined Electronic Digital Controller & Timer is installed. ±2ºC., one probe centrally mounted.
Temperature Up to 250°C
Temperature Recorder A, 1 point Circular Chart recorder is installed with chart Dia. 8”
Doors Two Doors, one opening into the sterile room and the other into the Non-sterile room. The doors are lined with silicon rubber for sealing. The door in the sterile room is claded with 16 gauge AISI SS 304 sheet.
Material of Construction Interiors with 14 gauge S.S. 316 quality sheets. Exteriors with 16 gauge S.S. 304 Quality sheet. Frame work of Rolled steel sections 6, 5 & 3mm. the interior frame work of S.S 316 quality
Panel Board Consists of: Ammeters, Voltmeter, Voltmeter switch, HRC fuses & Circular chart Recorder
HEPA Filter Module Air entering the system is passed through a HEPA Filter Module consisting of a pre-filter up to 5 microns, a blower & a HEPA Filter up to 0.3 microns. The filtered air is fed to the impeller for circulating in the system.
HEPA Filter Module Air entering the system is passed through a HEPA Filter Module consisting of a pre-filter up to 5 microns, a blower & a HEPA Filter up to 0.3 microns. The filtered air is fed to the impeller for circulating in the system.
Material of Construction Interiors with 14 gauge S.S. 316 quality sheets. Exteriors with 16 gauge S.S. 304 Quality sheet. Frame work of Rolled steel sections 6, 5 & 3mm. the interior frame work of S.S 316 quality
Trolley Fabricated from AISI SS 316 Quality angles & flats with ‘U’-Grooved Stainless Steel wheels.
Transfer trolley Fabricated from S.S. 304 Quality Angles & flats with castor wheel for sterile & Non-sterile room.

Salient Features


	Complete GMP model.

	Basic structure made from M.S. Heavy angles.

	Sterilizer inner walls made from AISI SS 316 and outer walls made from AISI SS 304.

	Doors provided on both sides, one opening is in non-sterile area and second opening in sterile area.

	‘A’ grade mineral wool insulation to optimize heat effectiveness and stop heat loses.

	Dynamically balanced fan provided for hot air circulation to achieve uniform temperature.

	Complete electric panel board with pulley and damper connection.


Process Operation


The Ampoules / Vials placed in trays are washed in non-sterile room and loaded on the trolley. The trolley is moved to the sterilizer on a transfer trolley. Temperature and Times are set on the Digital Controller. The Impeller mounted on the top circulates the hot air horizontally over the charge. The air is heated by elements mounted on the top. Fresh air enters the system through Hepa Filter Module. The system incorporates two doors, one opening into the sterile room and the other opening in the non-sterile room. Both the doors are pneumatically interlocked. The temperature profile during sterilization cycle is recorded on a circular chart recorder, validation of the system is provided by a six-point digital temperature scanner. After the time period required for sterilizing the batch has elapsed, the heating circuit shuts of the pneumatics damper (exhaust) opens and cooling operation commences.

Interested in this product? Ask for more details & Latest Price from seller

Send Enquiry

Company Details

About Us
Adinath International is engaged into Pharmaceutical turnkey project export to the international market. Adinath International offers complete solution for setting up pharmaceutical formulation projects including layout designs, detailed engineering, capacity calculation based on client input, engineering specifications, HVAC System design, on-time supply of equipment, installation, commissioning, etc. The company is based in Ahmedabad, India and has a pool of dedicated professionals from the field.
We work closely with our client and offer personalized and cost effective solutions. The strength of the company lies in meeting its commitments to its client. It is a matter of great satisfaction to us that our clients continue to have business relationship with us on a continuous basis.
Apart from Pharmaceutical, Biotech & Veterinary Adinath International also works for Cosmetic, Food, Chemical & Distillery plants.
Our Vision is to deliver well engineered, high quality equipments equivalent to international standards & meeting the client’s requirement at reasonable prices. Robust design, quality procedures & careful inspection make our product accurate and precise. Constructed from the ground up with finest material, our products are up to the mark to the demanding requirement of GMP and cGMP standards.
We take pride in supplying most economical, sturdy and easily maintainable machines to suit the requirements of our customer's individual specific requirements. Their suggestions, guidance and feedback immensely helped us in designing tailor made machines for their special needs.

Nature of Business Manufacturer / Exporter / Supplier / Retailer / Retailer
Year of Establishment 2009

Tell us your Buy Requirement to Get Instant Response

Tell us what you need?

Looking for Dry Heat Sterilizer?

Quantity

Seller Contact Details

Seller Adinath International
Address Nikol, Ahmedabad, Gujarat

View Mobile No Send Enquiry

Find similar products

Dry Heat Sterilizer
Get Quote
by Propack Technologies Pvt..

Ghatkopar, Mumbai, Maharashtra

View Mobile Send Enquiry
Class 100 Dry Heat Sterilizer
Get Quote
by Reliance Instruments Cor..

Ambattur, Chennai, Tamil Nadu

View Mobile Send Enquiry
Dry Heat Sterilizers, Capacity : 225 Liters
Get Quote
by BIONICS SCIENTIFIC TECHN..

Defence Colony, Delhi

View Mobile Send Enquiry
Dry Heat Sterilizers
Get Quote
by Ophtho Equip Inc

Navrangpura, Ahmedabad, Gujarat

View Mobile Send Enquiry
Dry Heat Sterilizers
Get Quote
by Powertech Industrial Equ..

Mumbra, Thane, Maharashtra

View Mobile Send Enquiry
Dry Heat Sterilizer
Get Quote
by Ashirwad Enterprise

SP Ring Road, Ahmedabad, Gujarat

View Mobile Send Enquiry
Fully Automatic Metal Dry Heat Sterilizer
5 Lakh - 80 Lakh/ Piece
by Mevish Pharma Machinerie..

Palghar East, Palghar, Maharashtra

View Mobile Send Enquiry
Stainless Steel Fully Automatic Dry Heat Sterilizer, Voltage : 220V
25 Lakh - 30 Lakh/ piece
by Genist Technocracy Pvt L..

Lalru, Mohali, Punjab

View Mobile Send Enquiry
220 V Stainless Steel Dry Heat Sterilizer, Automation Grade : Semi Automatic
Get Quote
by LNV Corporation

Berasia Road, Bhopal, Madhya Pradesh

View Mobile Send Enquiry
Stainless Steel YSU-623 Dry Heat Sterilizer, Automation Grade : Automatic
Get Quote
by Yorco Scientific Udyog P..

Mohan Nagar, Ghaziabad, Uttar Pradesh

View Mobile Send Enquiry

Find Seller from near by Cities

Dry Heat Sterilizer

Listing ID #4572824

Get Latest Price

Insulation Wall125mm (t) Mineral Wool. A grade mineral wool insulation to optimize heat effectiveness and stop heat loses.
FinishingAll stainless steel components buffed to matt finish.
Panel BoardConsists of: Ammeters, Voltmeter, Voltmeter switch, HRC fuses & Circular chart Recorder
Air recirculationA 2 H.P. 1440-RPM motor drives the impeller. Air enters the Chamber through perforations provided passes horizontally over the charge and is re-circulated.
Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

View More Details

Send Enquiry

Product Details

Insulation Wall 125mm (t) Mineral Wool. A grade mineral wool insulation to optimize heat effectiveness and stop heat loses.
Finishing All stainless steel components buffed to matt finish.
Temperature Control & Timer A combined Electronic Digital Controller & Timer is installed. ±2ºC., one probe centrally mounted.
Doors Two Doors, one opening into the sterile room and the other into the Non-sterile room. The doors are lined with silicon rubber for sealing. The door in the sterile room is claded with 16 gauge AISI SS 304 sheet.
Control panel Motor Starter, Contactors, Rotary Switches, Indicating lights for heating & Cooling cycle and phase indicating lights.
Material of Construction Interiors with 14 gauge S.S. 316 quality sheets. Exteriors with 16 gauge S.S. 304 Quality sheet. Frame work of Rolled steel sections 6, 5 & 3mm. the interior frame work of S.S 316 quality
Exhaust damper Controlled by solenoid valve and is opened during the initial heat-up, shuts off and re-opens during cooling cycle.
Cooling Coils Crimped Finned Tubes with headers, S.S. 304 Quality to speed up cooling cycle.
HEPA Filter Module Air entering the system is passed through a HEPA Filter Module consisting of a pre-filter up to 5 microns, a blower & a HEPA Filter up to 0.3 microns. The filtered air is fed to the impeller for circulating in the system.
Air recirculation A 2 H.P. 1440-RPM motor drives the impeller. Air enters the Chamber through perforations provided passes horizontally over the charge and is re-circulated.
Fan Dynamically balanced fan provided for hot air circulation to achieve uniform temperature
Temperature Control & Timer A combined Electronic Digital Controller & Timer is installed. ±2ºC., one probe centrally mounted.
Interlocking To maintain the barrier between the sterile and non-sterile room, both the doors are pneumatically interlocked. The pneumatic system consists of pneumatic Cylinders, solenoid valves and flow control valves.
Material of Construction Interiors with 14 gauge S.S. 316 quality sheets. Exteriors with 16 gauge S.S. 304 Quality sheet. Frame work of Rolled steel sections 6, 5 & 3mm. the interior frame work of S.S 316 quality
Interlocking To maintain the barrier between the sterile and non-sterile room, both the doors are pneumatically interlocked. The pneumatic system consists of pneumatic Cylinders, solenoid valves and flow control valves.
Temperature Recorder A, 1 point Circular Chart recorder is installed with chart Dia. 8”
Doors Two Doors, one opening into the sterile room and the other into the Non-sterile room. The doors are lined with silicon rubber for sealing. The door in the sterile room is claded with 16 gauge AISI SS 304 sheet.
Cooling Coils Crimped Finned Tubes with headers, S.S. 304 Quality to speed up cooling cycle.
Fan Dynamically balanced fan provided for hot air circulation to achieve uniform temperature
Temperature Recorder A, 1 point Circular Chart recorder is installed with chart Dia. 8”
Exhaust damper Controlled by solenoid valve and is opened during the initial heat-up, shuts off and re-opens during cooling cycle.
Air recirculation A 2 H.P. 1440-RPM motor drives the impeller. Air enters the Chamber through perforations provided passes horizontally over the charge and is re-circulated.
Temperature Up to 250°C
Trolley Fabricated from AISI SS 316 Quality angles & flats with ‘U’-Grooved Stainless Steel wheels.
Transfer trolley Fabricated from S.S. 304 Quality Angles & flats with castor wheel for sterile & Non-sterile room.
Scanner A six point Digital Scanner is incorporated, with facility of Hold & Scan at all six points.
Panel Board Consists of: Ammeters, Voltmeter, Voltmeter switch, HRC fuses & Circular chart Recorder
Trolley Fabricated from AISI SS 316 Quality angles & flats with ‘U’-Grooved Stainless Steel wheels.
HEPA Filter Module Air entering the system is passed through a HEPA Filter Module consisting of a pre-filter up to 5 microns, a blower & a HEPA Filter up to 0.3 microns. The filtered air is fed to the impeller for circulating in the system.
Control panel Motor Starter, Contactors, Rotary Switches, Indicating lights for heating & Cooling cycle and phase indicating lights.
Transfer trolley Fabricated from S.S. 304 Quality Angles & flats with castor wheel for sterile & Non-sterile room.
Panel Board Consists of: Ammeters, Voltmeter, Voltmeter switch, HRC fuses & Circular chart Recorder
Scanner A six point Digital Scanner is incorporated, with facility of Hold & Scan at all six points.
Temperature Up to 250°C

Salient Features


	Complete GMP model.

	Basic structure made from M.S. Heavy angles.

	Sterilizer inner walls made from AISI SS 316 and outer walls made from AISI SS 304.

	Doors provided on both sides, one opening is in non-sterile area and second opening in sterile area.

	‘A’ grade mineral wool insulation to optimize heat effectiveness and stop heat loses.

	Dynamically balanced fan provided for hot air circulation to achieve uniform temperature.

	Complete electric panel board with pulley and damper connection.


Process Operation


The Ampoules / Vials placed in trays are washed in non-sterile room and loaded on the trolley. The trolley is moved to the sterilizer on a transfer trolley. Temperature and Times are set on the Digital Controller. The Impeller mounted on the top circulates the hot air horizontally over the charge. The air is heated by elements mounted on the top. Fresh air enters the system through Hepa Filter Module. The system incorporates two doors, one opening into the sterile room and the other opening in the non-sterile room. Both the doors are pneumatically interlocked. The temperature profile during sterilization cycle is recorded on a circular chart recorder, validation of the system is provided by a six-point digital temperature scanner. After the time period required for sterilizing the batch has elapsed, the heating circuit shuts of the pneumatics damper (exhaust) opens and cooling operation commences.