AIPL4 150 160 Servo Coil Inserting Machine

Machine main function and characteristic The machine insert coil and wedge simultaneously, coil insertion is controlled by servo motor system, and wedge insertion by variable frequency motor.

It is controlled by HMI, and machine can diagnose breakdown automatically.

This machine is suitable for Polyester Film wedge roll material with fixed thickness and fixed width (width and thickness dimension is provided by customer)

The wedge feeding is done by stepping motor, feeding length, cutting, forming, inserting slot number   could be set.

Both copper wire and aluminium wire are appliable.

Production capacity ≤25s/set (exclude the man-hours for auxiliary work)

Primary qualification rate for copper wire ≥98.5%, after rework, the rate ≥99.5%

Both wedging system and feeding system have pre-decelerating function.

This machine has alarm for material runout.

Wire pushing height and stop time can be set in the HMI interface.

This machine has fixed foot and removable wheel.Wedge should not be damaged, no burr in the surface, no movement or slide.

Slot paper should not be damaged, no movement or slide. Copper wire should not be pull away from the paper.

The stator should not be deformation or stator lamination should not be upward

Maincomponents:

PLC：Yaskawa/INVT

   Servo Motor：Yaskawa/INVT

   Cylinder: Festo/AirT

 SwitchandButton: Delixi/Schneider

MainTechnicalData:

Statorstacklength:                      10-150mmStator OD:Max.160mm

StatorID:30~115mm

Tooling traveling distance: Max.70mmSuitable wire material:copper/aluminium wireSlot number:8~48slots