Aggregate Impact Testing Apparatus

We are a respected manufacturer, supplier and exporter of Aggregate Impact Testing Apparatus in Kolhapur, India. This is an important instrument in construction projects and fulfils many purposes of the industry. The apparatus offered by us is highly demanded due to its precise and effective working. We manufacture the testing apparatus in adherence to quality standards and norms of the industry. The apparatus is widely used in the ceramic industry and calibration laboratories or test houses.

Specifications :

• Mechanical Properties of Aggregates

• RSI-185
  
  • Aggregate Impact Tester - IS 2386 (Part IV),BS812
  • Determining the aggregate impact value of coarse aggregate. Consists of a base weighing between 22-30 kg with a lower surface of not less than 30 cms and support columns to form a rigid frame work around quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380+-5.0 mm. The hammer is provided with a locking arrangement.
  • A metal tup (hammer) weighing 13.5 to 14.0 kg, the lower end of in cylindrical shape, 100 mm in diameter and 5 cm long with a 2 mm chamfer I at the lower edge, and^ case hardened.
  • Complete with a cylindrical cup, 102 mm dia x 50 mm depth, one measure 75mm dia x 50 mm deep and tamping rod of circular cross-section 10 mm in diameter and 230 mm long, rounded at one end.
• RSI-186
  
  • Aggregate Impact Tester with automatic blow counter, as per IS - 2386 (P-IV)
  • Spares
  • Automatic blow counter
  • Tamping rod.
• RSI-187
  
  • Aggregate Crushing Value test apparatus : IS : 2386 (Part IV)
  • Consists of a 15 cms diameter open-ended steel cylinder, with plunger and base plate. Complete with a tamping rod of circular cross-section 16 mm in diameter and 45 to 60 cms long, rounded at one end.
  • RSI-18810% Fine Value apparatus as per IS: 2386 (p-iv) with tamping rod and measure.
• RSI-189
  • Aggregate Crushing Value test apparatus IS:2386(P-iv)BS812
  • Similar to RSI-187, but 75 mm dia cylinder. Accessories :
  • Cylindrical metal measure 11.5 cms diameter and 18 cms height fitted with handles.
  • Aggregate Abrasion Value
• RSI-190
  
  • Deval Abrasion Testing machine: IS: 2386 (P-IV) For the determination of resistance of aggregate to wear by abrasion. Two hollow cylinders, closed at one end and provided with tightly fitting covers at the other end.
  • The inside diameter of the cylinder 20 cms and 34 cms depth. The cylinder are mounted on a shaft at an angle of 30 degrees with the axis of rotation.
  • The shaft rotates at 30-33 r.p.m. through a reduction gear, coupled to a motor. Suitable for operation on 440 volts, three phase, 50 cycles,A.C. Supply.
  • Supplied complete fitting with a counter and push button starter.
  • Accessories
  • Abrasive Charge - Consists of 12 Nos. cast iron spheres or steel spheres (steel balls) hardened, approximately 48 mm in diameter, each weighing between 390-445 gram.