Listing ID #4508965
Company Information
Ask for more detail from the seller
Contact SupplierWe are the main supplier of this product.
DESCRIPTION |
: |
This is an acrylic aliphatic coating provide a durable finish for chemical and coastal environment. It has excellent colour and gloss retention properties, good abrasion resistance and UV resistance. |
RECOMMANDED USE |
: |
Chemicals & Fertilizer Industries, Petrochemical Complexes, Refineries, Bulk Storage Tanks, Plants Equipments, Structures etc. Maintenance Coating, Mild Steel, Stainless Steel, GI, Aluminium, Plastics, ABS, FRP, Wood, Acrylics, Polystyrene Polycarbonates, Cement, Concrete, etc. Hygienic Wall Coating. Original Equipment Coating |
TYPE |
: |
Two pack, cured with aliphatic polyisocyanate |
MIXING RATIO |
: |
3 : 1 ( Base: Hardener) By volume |
MATURATION TIME |
: |
30 Minutes |
POT LIFE OF MIXTURE |
: |
2 – 3 hrs |
FINISH |
: |
Glossy / semi glossy/ matt |
COLOUR |
: |
Any assorted shade |
COVERING CAPACITY
(THEORATICALLY) |
: |
10 – 12 Sq. Mt./ Ltr. per coat at 35 micron DFT |
RECOMMENDED DFT |
: |
30 - 35 Microns per coat |
VOLUME SOLIDS |
: |
Approx. 45% |
DRYING TIME |
: |
Touch : 1 hr, Handle : 6-8 hrs., Hard : Overnight |
OVER COATING INTERVAL |
: |
Min. Overnight. Max - 6 days |
FLASH POINT |
: |
Above 250C |
RECOMMENDED THINNER |
: |
Polyurethane Thinner |
METHOD OF APPLICATION |
: |
Brush, roller, Conventional or airless Spray |
DIRECTION FOR USE |
: |
Surface should be clean, for free rust, grease, oil, moisture and lose flakes. Sand blast mild steel substrate. Stir the contents before use. Mix base and hardener properly in the recommended ratio. Allow mixture to mature for 20 minutes before applying by brush or spray. Use if necessary recommended thinner. Primer surface should not be exposed to corrosive environment for a long time without application of finishing paints. |