A53 GR. B Carbon Steel Seamless Pipes

Listing ID #3221257

We maintain a steady supply of our products courtesy an ultramodern inventory management system and a high-tech storage facility. Our resources enable us to maintain year round products' availability. Established as a dignified name, we are the celebrated organization in the market offering quality A53 GR. B Carbon Steel Seamless Pipes.

Scope : Covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Continuous-Welded pipe is not intended for flanging. Purpose for which pipe is intended should be stated on order.  

Materials and Manufacture : The steel for both seamless and welded pipe shall be made by one or more of the following processes: open-hearth, electric furnace, or basic-oxygen. The weld seam of electric-resistance welded pipe in Grade B shall be heat treated after welding.

Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

Hot-Dipped Galvanizing : Sets standards for coating of pipe with zinc inside and outside by the hot-dipped process. Weight of coating must not average less than 1.8 oz. per square foot and not less than 1.6 oz. per square foot.

Permissible Variations in Wall Thickness : The minimum wall thickness at any point shall not be more than 12.5% under the nominal wall thickness specified.

Permissible Variations in Weights per Foot :Plus or minus 10%

Number of Tests Required : Seamless and Electric-Resistance-Welded – Bending, flattening, tensile on one length of pipe from each lot of 500 lengths or less of a size. Continuous-Weld – Bending, flattening, tensile

Hydrostatic Testing : Hydrostatic inspection test pressures for plain end and threaded and coupled pipe are specified. Hydrostatic pressure shall be maintained for not less than 5 seconds for all sizes of seamless and electric-resistance-weld pipe.  

Mechanical Tests Specified : Tensile Test – Transverse required on ERW for NPS 8 and large. Sending Test (Cold) – STD and XS-NPS 2 and under XXS-NPS 1 1/4 and under.

Standard Weight

• Single Random – 16′ – 22′. 5% may be jointers. If Plain Ends – 5% may be 12′ – 16′.
• Double Random – Shortest Length 22′, minimum average for order 35′.

Extra Strong and Double Extra Strong

• Single Random – 12′ -22′. 5% may be 6′ – 12′.
• Double Random (XS and lighter) – Shortest Length 22′, minimum average for order 35′.
• Lengths longer than single random with wall thicknesses heavier than XS subject to negotiation.

Required Markings on Each Length : (On Tags attached to each Bundle in case of Bundled Pipe)

• Rolled, Stamped, or Stenciled (Mfrs. Option)
• Name brand of manufacturer
• Kind of pipe, that is, Continuous Welded, Electric-Resistance-Welded A, Electric-Resistance-Welded B, Seamless A, Seamless B, XS for extra strong, XXS for double extra strong.
• ASTM 53
• Length of pipe

Types and grades:

• Type F—Furnace-butt-welded, continuous welded Grade A,
• Type E—Electric-resistance-welded, Grades A and B, and
• Type S—Seamless, Grades A and B.

General Information

• Couplings – Applied handling tight. Couplings, 2" and smaller straight tapped, other sizes taper tapped.
• Thread Protection – Applied to pipe 4" and larger.
• End Finish (unless otherwise specified) –
• STD or XS, or wall thicknesses less than 0.500 in. (excluding XXS): Plain and beveled
• All XXS and wall thicknesses over 0.500 in.: Plain end square cut.

A53 GR. B Carbon Steel Seamless Pipes Application : Buildings, infrastructure, tools, ships, automobiles, machines and appliances are all made from steel. Steel is frequently used because it is durable and safe. Building materials underground may be susceptible to rotting and pests. Since steel is non-combustible and makes it harder for fire to spread, it is good to use when building homes. ASTM A106 Carbon steel pipe is highly resistant to shock and vibration. A53 GR. B Carbon Steel Seamless Pipes is Environmentally Friendly as well Cost-Effective.

Carbon steel pipe – Examples of use  : Bridges, Flood control, Harbors and airports, Building construction, Petroleum and natural gas, Wind power generation, Solar power and solar heat power generation, Geothermal power generation, Batteries and power devices etc.
A53 GR. B Carbon Steel Seamless Pipes Price

API X Grades - some of the sturdiest pipes and tubing available designed for extreme environments or exceedingly high pressure environments

  A53 GR. B Carbon Steel Seamless Pipes features:

• The American Petroleum Institute specification API 5L covers seamless and welded steel line pipe.
• API 5L, 45th Edition / ISO 3183
• This is steel pipe for pipeline transportation systems in the petroleum and natural gas industries
• A53 GR. B Carbon Steel Seamless Pipes is suitable for conveying gas, water, and oil.
• A53 GR. B Carbon Steel Seamless Pipes, high yield seamless pipes, modified to suit offshore structural purposes.
• Suitable for weldable structural steels for fixed offshore structures
• Eckhardt Steel & Alloys’ seamless and extra long ERW API 5L Line Pipe for dependable transmission of oil and gas to any type of collection and distribution point.

A53 GR. B Carbon Steel Seamless Pipes Advantages:

• As only the edges are heated, the tube possesses dean accurate surface.
• Safety is better than smls pipe.
• The cost is cheaper than smls pipe and LSAW pipe.
• Manufacturing speed is quicker than seamless pipe or sub merged welded pipes.