Listing ID #1262292
Company Information
Ask for more detail from the seller
Contact SupplierThe Cold Die Steel Blocks supplied by us is used in the industries at normal temperature conditions. Thus, Cold Die Steel Blocks requires high resistance to wear and tear along with toughness. We make sure that we obtain Cold Die Steel Blocks from the best manufacturers so as to meet high expectations of the industry. It is years of trust that we have built by delivering Cold Die Steel Blocks that is marked for quality and higher durability.
Highlights :
- | Material | Chemistry | Heat Treatment Details | |||||||||||||||
AISI/ ASTM |
EN | DIN | JIS | C | SI | Mn | P | S | Cr | W | Mo | V | Anealing (Slow Cooling) |
Quenchent (Hot Bath) |
Quenching | Tempering (Air Cooling) |
Annealed (HB) - Max |
Quenched (Hrc) Tempered |
D3 | X210Cr12 | 1.2080 | SKD1 | 2 | 0.25 | 0.45 | 0.03 | 0.01 | 12 | - | - | - | 830-880 | OIL/AIR | 930-980 | 150-200 | 248 | 61 |
D2 | X155Cr Vmo V12.1 | 1.2379 | SKD11 | 1.55 | 0.25 | 0.35 | 0.03 | 0.01 | 12 | - | 0.9 | 0.9 | 800-850 | AIR/OIL | 980-1030 | 150-200 | 248 | 60 |
01 | 100MNCrW4 | 1.2510 | SKS3 | 0.95 | 0.25 | 1.1 | 0.03 | 0.01 | 0.6 | 0.6 | 0.1 | - | 750-780 | OIL | 800-850 | 150-200 | 220 | 60 |
S1 | 60WCrV7 | 1.2550 | - | 0.6 | 0.6 | 0.3 | 0.03 | 0.01 | 1.1 | 2 | - | 0.2 | 710-750 | OIL | 780-820 | 150-200 | 225 | 58 |
02 | 90MnCrV8 | 1.2842 | - | 0.9 | 0.25 | 2 | 0.03 | 0.01 | 0.4 | - | - | 0.1 | 680-720 | OIL | 790-820 | 150-200 | 220 | 56 |
COLD WORK | AISI | DIN | Supply Condition | Rounds | Square | Flat | Application |
D3 | 1.2080 | Annealed | 8 - 660 | 20 - 250 | 20X10 - 1000X200 | Rolls for cold strip mills and wire squeezer mills, dies for small metal parts, punching and drawing dies for sinterings. | |
D2 | 1.2379 | Annealed | 8 - 700 | 20 - 250 | 20X10 - 1000X200 | Shear blades, blanking punches, die chasers, rolls for cold mills treading rolls and chasers, molds for plastic materials. | |
O2 | 1.2842 | Annealed | 8 - 660 | 20 - 250 | 20X10 - 500X150 | Taps, shear knives, moulds for plastic materials, gages, knives for woodand paper working. | |
S1 | 1.2550 | Annealed | 25 - 210 | - | 100X40 - 300X80 | Tools exposed to voilent impacts such as piercing punches, hammers, debarring and coining tools, shear blades. | |
O1 | 1.2510 | Annealed | 8 - 500 | 20 - 250 | 20X10 - 500X150 | Dies, blanking punches, moulds for plastic materials. |