Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Chromatography Data Acquisition Systems

Listing ID #4152172

  • Weight3.7 kg
  • DimensionsL=32cm, W=21.5cm, H=9cm
  • Power Input220Vac/50Hz (±1%)
  • Temperature50ºC (Max.)
  • Supply Type Manufacturer, Exporter, Supplier
  • Preferred Buyer Location All over the world
View More Details
Send Enquiry

Company Information

  • Member Since 15 Years
  • Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

Chromatography Data Acquisition Systems or DAta STAtions series  DASTA 710/720 is a stand-alone, high accuracy, micro-controller-based digital micro- voltmeter, which can be interfaced through the PC’s RS232 (serial) port.

It comes with its own chromatograph plotting and analysis software WinQCDS.

 

DASTA is a Chromatography Data Acquisition System, which can be coupled to any GC/HPLC a computer via a serial RS232 link.

Special features of DASTA Series :

  •  Data Acquisition Parameters
  • Single and dual channel configurations.
  • Programmable sampling rate : 50Hz, 10Hz and 2Hz.
  • Programmable input voltage ranges : 10V, 5V, 2.5V & 1.5V.
 

 Precision Performance Hardware

  • High precision 24-bit ADCs.
  • Configurable on-board digital filters for each channel.
 

 

 Chromatography Data Analysis Software

  • Versatile peak-editing tools.
  • Precise measurement of areas.
  • Automatic detection of both positive & negative peaks.
 

 

 Advanced Features

 

  • Auto-ranging facility available on each channel.
  • Relative reading facility for each channel with offset nulling.
  • “Save Configurations” & “Recall Configurations” options.


Hardware
No. of channels Single & dual channel  configurations
A/D Convertor 24-bit
Input ranges 1.25, 2.5, 5.0, 10.0V
Sampling frequency 2, 10, 50Hz
Typical System Noise <5µV @ 2.5V FS / 10Hz

 

Software (WinQCDS 8.0)
Run Time Limited only by HDD Capacity
Number of Peaks Limited only by HDD Capacity
Number of Standards Six
Baseline Correction Interactive
Reference Peaks Unlimited
Internal Standards One

 

Standard Accessories
Serial Cable One (2m)
Signal Cable One (1m) standard
User Manual One
Software Provided in CD

 

Minimum Computer Requirement
Computer Pentium IV® & above
Platform MS WINDOWS XP®
Main Memory 128 MB
Hard Disk Drive 20 MB free space
Compact Disk Drive Standard
Coloured Monitor Min. 1024×768 resolution
Serial Port Two/Three
Parrallel Port One
Printer Inkjet/Laserjet

 

Installation Requirements
Power Input 220Vac/50Hz (±1%)
Temperature 50ºC (Max.)
Dimensions L=32cm, W=21.5cm, H=9cm
Weight 3.7 kg

 

Company Details close-icon

If you are interested to get your sample(s) scanned under an ambient Air STM, you can use the nanoREV facility available at QuazarTech.
Fill in the details of the sample in the form STM Sample Submission Form given here and e-mail it to support[at]quazartech.com and;
Courier us your samples to the following address.
The acknowledgement to your samples will be sent to the e-mail address specified in the form
  • Nature of Business Manufacturer / Exporter / Supplier / Retailer
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

By clicking Get Quotes Now, I accept the T&C and Privacy Policy.

Looking for Chromatography Data Acquisition Systems?

Quantity
Seller Contact Details

Find Seller from near by Cities

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice