Modular Max VRLA Battery, Voltage : 2V

Voltage2V
ContainerStandard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
ElectrolyteDilute sulphuric acid (Specific gravity = 1.3)
Ah Rating150Ah to 3000Ah C10. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.8V.
Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

Company Information

Ask for more detail from the seller

Report incorrect details

Voltage2V
Ah Rating150Ah to 3000Ah C10. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.8V.
-ve PlateFlat pasted grid, made of Pb-Ca alloy, balanced to optimize recombination efficiency
ContainerStandard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
TechnologyValve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
SeparatorMicro porous glass fibre, which is mechanically strong, has low electrical resistance, and absorbs the electrolyte completely into its structure
+ve PlateFlat pasted grid, 0.245” thick, made of Pb-Ca-Tin alloy, to minimize corrosion and prolong life
ElectrolyteDilute sulphuric acid (Specific gravity = 1.3)

Salient Features

Super thick +ve plates minimize corrosion and prolong life
Balanced lead-calcium -ve plates optimize recombination efficiency
Thermally welded case-to-cover bond for eliminating leakage
Single-piece container construction
Lead casting terminal, threaded copper insert with large surface area to provide maximum conductivity
Welded/epoxy, dual post sealed design provides the highest integrity seal in the industry
Large copper post design also enhances the high rate performance
Ring burn with secondary epoxy resin seal is 100% water bath tested in the factory and proven in service
Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924

A – The terminal voltage for all models is 2V.

B – Ah rating is measured @ 25°C with end voltage per cell (EVPC) = 1.75V. The actual battery performance may be ±5% of the figures shown above.

C – SCC means Short Circuit Current and its unit is Amperes.

D – IR means Internal Resistance and its unit is milli-ohms.

E – TT means Terminal Type.

F – Actual dimensions may vary by ±1%.