Venturi Flowmeter with Magnehelic Gage

Series VFLO Venturi Flowmeter with Magnehelic® Gage

±2.5% Accuracy, Dual Scale in SCFM & in w.c.

The Series VFLO Venturi Flowmeter with Magnehelic® Gage is fabricated from aluminum and has a gradual Venturi profile to reduce pressure losses through the meter. Flowmeter can be used in a vertical or horizontal position just by rotating the Magnehelic® gage. The Magnehelic® gage provides a large, clear and accurate display of your differential pressure reading. Each meter is calibrated at standard atmospheric conditions. The dual scale reads in SCFM and in w.c. The meter is supplied with easy to read reference charts for various flow conditions. It is available in line sizes from 1" to 4" and can handle vacuum and pressure applications.

To place an order for the Venturi Flowmeter with Magnehelic® Gage, see the Magnehelic® Configurator.

Product Applications

Filter monitoring

Air velocity with Dwyer pitot tube

Blower vacuum monitoringFan pressure indication

Duct, room or building pressures

Clean room positive pressure indication

ModelDescription

Series VFLOTo place an order for the Venturi Flowmeter with Magnehelic® Gage, see the Magnehelic® Configurator

Specifications

Service:Air and non-combustible, compatible gases.

Wetted Materials:Aluminum, silicone, acrylic, polycarbonate, high carbon steel, low carbon steel, brass, paper, acrylic paint, enamel paint, alkyd coating, nickel plate, zinc plate, helsel FC, 300 series stainless steel, PTFE, Loctite® AV sealant, commercial black rubber, neoprene, samarium cobalt, nickel alloy steel cover, beryllium copper.

Housing:Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.

Accuracy:±2.5% FS.

Pressure Limits:-20" Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar). For applications with high cycle rate within gage total pressure rating, next higher rating is recommended.

Overpressure:Relief plug opens at approximately 25 psig (1.72 kPa).

Temperature Limits:20 to 140°F (-6.67 to 60°C).

Size:4" (101.6 mm) diameter dial face.

Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations.

Process Connection:Female NPT of nominal line size. See Model Chart page.

Weight:Gage only: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g); Venturi: see Model Chart page.

Features

Gradual Venturi profile reduces pressure losses through meter helping to insure a more accurate measurement to meet measurement specifications

Easy to read gage through undistorted plastic face permits viewing from far away

Patented design provides quick response to pressure changes means no delay in assessing critical situations

Durable and rugged housing and high-quality components combined provides longservice life and minimized down-time

Accessories

Model NumberDescription

MVB-LM1Mini Brass Ball Valve, lever handle, 450 psi, 1/8"

MVB-WM1Mini Brass Ball Valve, wedge handle, 450 psi, 1/8"

MVB-TM1Mini Brass Ball Valve, tee handle, 450 psi, 1/8"

Usage : Compatible Gases.

Brand Name : DWYER USA

Material : Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel, Paper

Type : Venturi Flowmeter With Magnehelic Gage

Size : 4

Warrenty : 1 Year

Certificate : YES

Accuracy : ±2.5% FS.

Color : Grey

Venturi Flowmeter with Magnehelic Gage

Series VFLO Venturi Flowmeter with Magnehelic® Gage

±2.5% Accuracy, Dual Scale in SCFM & in w.c.

The Series VFLO Venturi Flowmeter with Magnehelic® Gage is fabricated from aluminum and has a gradual Venturi profile to reduce pressure losses through the meter. Flowmeter can be used in a vertical or horizontal position just by rotating the Magnehelic® gage. The Magnehelic® gage provides a large, clear and accurate display of your differential pressure reading. Each meter is calibrated at standard atmospheric conditions. The dual scale reads in SCFM and in w.c. The meter is supplied with easy to read reference charts for various flow conditions. It is available in line sizes from 1" to 4" and can handle vacuum and pressure applications.

To place an order for the Venturi Flowmeter with Magnehelic® Gage, see the Magnehelic® Configurator.

Product Applications

Filter monitoring

Air velocity with Dwyer pitot tube

Blower vacuum monitoringFan pressure indication

Duct, room or building pressures

Clean room positive pressure indication

ModelDescription

Series VFLOTo place an order for the Venturi Flowmeter with Magnehelic® Gage, see the Magnehelic® Configurator

Specifications

Service:Air and non-combustible, compatible gases.

Wetted Materials:Aluminum, silicone, acrylic, polycarbonate, high carbon steel, low carbon steel, brass, paper, acrylic paint, enamel paint, alkyd coating, nickel plate, zinc plate, helsel FC, 300 series stainless steel, PTFE, Loctite® AV sealant, commercial black rubber, neoprene, samarium cobalt, nickel alloy steel cover, beryllium copper.

Housing:Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.

Accuracy:±2.5% FS.

Pressure Limits:-20" Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar). For applications with high cycle rate within gage total pressure rating, next higher rating is recommended.

Overpressure:Relief plug opens at approximately 25 psig (1.72 kPa).

Temperature Limits:20 to 140°F (-6.67 to 60°C).

Size:4" (101.6 mm) diameter dial face.

Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations.

Process Connection:Female NPT of nominal line size. See Model Chart page.

Weight:Gage only: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g); Venturi: see Model Chart page.

Features

Gradual Venturi profile reduces pressure losses through meter helping to insure a more accurate measurement to meet measurement specifications

Easy to read gage through undistorted plastic face permits viewing from far away

Patented design provides quick response to pressure changes means no delay in assessing critical situations

Durable and rugged housing and high-quality components combined provides longservice life and minimized down-time

Accessories

Model NumberDescription

MVB-LM1Mini Brass Ball Valve, lever handle, 450 psi, 1/8"

MVB-WM1Mini Brass Ball Valve, wedge handle, 450 psi, 1/8"

MVB-TM1Mini Brass Ball Valve, tee handle, 450 psi, 1/8"

Usage : Compatible Gases.

Brand Name : DWYER USA

Material : Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel, Paper

Type : Venturi Flowmeter With Magnehelic Gage

Size : 4

Warrenty : 1 Year

Certificate : YES

Accuracy : ±2.5% FS.

Color : Grey