Soldering and Desoldering Station SVS-580AS

Listing ID #4726497

Get Latest Price

Weight250g (w/o cord, hose )
Input Voltage/Power Consumption110V,120-130V,220-240V AC 85W
Leak VoltageLess than 2mV
Dimensions220 x 155mm
Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

View More Details

Send Enquiry

Product Details

Weight 250g (w/o cord, hose )
Standard Tip PX-2RT-B
Leak Voltage Less than 2mV
Input Voltage/Power Consumption 110V,120-130V,220-240V AC 70W
Length 190mm (with PX-2RT-B w/o cord bushing )
Standard Nozzle TP-100N-S5
Heater Ceramic heater
Cord Length 1.2m
Dimensions 220 x 155mm
Heater Ceramaic Heater
Input Voltage/Power Consumption 110V,120-130V,220-240V AC 85W
Cord Length 1.2m
Ground Resistance Less than 2Ω

OPEN-VALVE MECHANISM

Two-stage trigger switch (PAT.P)
Step 1
Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.
Step 2
Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.

400% More Suction Capacity

With open-valve mechanism

Ceramic Heater with Internal Sensor

A wide range for terminals, connectors and flat ICs

Superior Temperature-Control Circuit

To keep the temperature constant during desoldering

Zero Volt Switch Circuit

Reduces noise during heater ON/OFF

Replaceable Cartridge Filter

Makes changing the filter easy

TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES

Desoldering/Soldering time is approx. 2 seconds / 5×5mm land (with PX-2RT-B tip, TP-100N-10 nozzle)

Vacuum pressure compared with other goot models

The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1second. (about 4 times faster than our SVS-500AS).

MODEL		SVS-580AS
Voltage		110V,120-130V,220-240V AC 50/60Hz
Power Consumption		110V,120-130V (200W)
		220-240V (270-300W)
Power Cord Length		1.5m
TemperatureSetting Range	Deoldering Unit	250−450˚C
	Soldering Unit	200−480˚C
Insulation Resistance		Over 100MΩ(500V DC)
Vacuum Pump System		Diaphragm system
Vacuum		- 0.08MPa (-600mmHg)
Accessories		Cleaning pin TP-100CP-13
		Soldering iron stand ST-76
Total Weight		4.0kg (w/o cord )

CONTROL BOX
Output Voltage	110V,120-130V,220-240V AC
Dimensions	205(W) x 170(H) x 160(D) mm
Weight	3.6kg (w/o cord, hose )

Interested in this product? Ask for more details & Latest Price from seller

Send Enquiry

Company Details

Advance Tech was established in 1996 with a dream and determination to bring to India World–Class Equipments, Tools & Consumables for Electrical, Electronics, Automobile, Pharma Industry and other commercial applications, including Electronic Maintenance. Advance Tech through its vision and imagination, strengthened by its continuous pursuit for excellence has brought under its umbrella, well proven, state of art technologies time tested to fulfill the stringent needs of Indian Industry. Our focus is on Telecom, Defence, Medical Electronics, Auto Electronics, Space, Consumer Electronics and Electronics maintenance in Process Plants.
Journey
1996 - Exclusive distributor for Goot, Japan. Award
1997 - Purchase Delhi office in central Delhi.
1997 - Exclusive distributor for Plato Product Inc., USA.
1997 - Purchased New Delhi office premises.
1998 - Branch office started in Bangalore.
2000 - Owned Bangalore office premises at prestigious place MG Road.
2000 - (August) Exclusive distributor for ASA Enterprise Corporation, Taiwan.
2000 - (May) Exclusive distributor for interflux, Singapore/Belgium.
2000 - (December) Exclusive distributor for Piergiacomi, Italy.
2002 - (June) Exclusive distributor for Paladin Tools, USA.
2003 - (June) Exclusive distributor for Engineer Inc, Japan.
2003 - Purchased and shifted New Delhi office to New and bigger premises.
2004 - Started sourcing several products from various countries to enhance our capability of supplying optimum price performance tools.
2004 - New space purchased for store near office.
2006 - Entered into Exclusive distributorship for Sheshido Electric Company, Japan.
2006 - Advance Tech Logo is registered.
2006 - Branch office started in Pune to cater west India customers.
2007 - Won EFY Award for Soldering-Desoldering Category.
2007 - Advance Tech Services registered as Advance Tech Services Pvt. Ltd.
2008 - Exclusive agreement with Ceder, Japan.
2008 - Distribution for Y&D Dispensing Line.
2009 - New ERP Software implementations.
2010 - Hyderabad Branch Open.
2012 - Distribution for Ikuchi Japan for dry fog humidifiers.
2012 - Distribution exclusive for Siborg Canada.
2012 - Distributor Nakajima Japan in India.
2013 - Distribution for Ritz Germany for Enamel Wire Stripper.
2013 - Got ISO 9001:2008 Certification
Our strategy is to build long-term partnerships with our customers. With their support, we aim to maximize the potential of our traditional business through a combination of enhanced quality of service, creative marketing, innovative pricing and cost-effective after sale service.