+ / - 24V/2A DC POWER SUPPLY

SPECIFICATIONS FOR +/-24V/2A D.C. POWER SUPPLY
1 INPUT : 230V AC +/- 10%, single Phase
2. OUTPUT : +/-24V DC, 2A
3. LINE REGULATION : Less than 0.1% for change in input voltage from 207V to 253 V
4. LOAD REGULATION : +/-0.1% for change from no load to full load and vice versa
5 RIPPLE : Less than 5mV RMS
6 DRAFT IN 24 Hrs. : Less than 25%
7 OUTPUT VOLTAGE ADJUST: +/- 5% of r
ated output.
8 PROTECTIONS : Output will be protected against over loads, over voltages and continuous short circuits.
9 INDICATIONS ; One LED each to indicate the availability of DC outputs
.
10 TERMINATIONAS : Input is given through a Circular connector and output is given through a PIRI Terminal.
11 OPERATING TEMP : 0 to 55 Degree
12 MECHANICAL SIZE : 3U Height X Half 19� Rack width x less than 300mm depth.
Two units fitted in full 19� Rack.
13 RELATIVE HUMIDITY : 0 to 90% without condensation.
14 TEMP. COEFFICIENT : Less than 0.025% per Degree C.
15. POWER SUPPLY FAILURE ALARAM : Will be provided with relay contacts
16. PARALLEL OPERATION : Will be provided