Our Pneumatic Shearing Machines have Been Designed & Developed Through Structural Analysis Technique for Continuous Production, Accuracy and Repeatability.
 

Frame :
The Frame is Rigidly Constructed from Solid Steel Plates with Safeguards. Its Interlocked Design Provides Support to the Bed Directly On the Frame to Avoid Weak Sections At Load Supports.
Hold Down System :
Spring Loaded Mechanical Hold Down System is Provided to Hold the Sheet Securely to Avoid Slipping and Bowing. the Pressure of Each Hold Down Unit is Ample to Securely Hold Even Shorter Pieces Under One Hold Down. the Increase/decrease of Pressure of Hold Down is Adjusted Through Cam By Adjustable Lever and Rods.
Knives :
Each Machine is Provided with Four Edge Rectangular High Quality High Carbon High Chromium (hchc) Knives for Longer Life.
Fly Wheel :
Fly Wheel of Cast Iron Designed to Cater for Sufficient Energy Required for Operation, Brakes Provided On Request and Mounted On Quill for Higher Capacity, in Both Cases. Fly Wheel is On Antifriction Bearings.
Pneumatic Cluster & Brake :
Pneumatic Clutch & Brake is Designed for Excellent Torque Transmission Power, Low Inertia/high Torque, Combined with Single-disc Type with Sufficient Fins/ribs for Dissipation of Heat, Pneumatically Synchronized. Clutch Operating Under Pneumatic Pressure Released By Spring, Brake Operating On Spring and Released Pneumatically. for Higher Torque, the Clutch and Brake are Provided Separately. Single Solenoid Valve At Air Entry & Quick Exhausts for Addition Safety.
Mechanical Back Gauge :
This Equipment is Provided with Scale to Give Instantaneous Reading of Distance Between Shear and Back Gauge to Avoid Errors.
Finger Guard :
To Avoid Accident, Finger Guard is Fitted in Front of Hold Down System for Operator's Protection Without Obstructing His View.
Lubrication :
All Moving Parts are Provided Lubrication By Motorized Pump for Smooth Operation.

      
Standard Accessories& Features :

• Pneumatic Clutch
• Quick Exhausts
• Air Preparation Unit
• Gear & Wheel Guard
• Hand Operated Back Gauge
• Motorized Lubrication Pump
• Electric Panel
• Two Hand Box
• Emergency Stop
• Batch Counter
• Pressure Sensor
• T-Slot Front Supporters
• Front Scale Gauge.
• Single Stroke/ Semi-Cotni, Continues Stroke/ Inching
• Buzzer
• Foot Switch
• Motor, Vee Belts, Pulley
• Volt Meter

Optional Accessories :

• Ball Roller Or Ball Transfer
• Foundation Bolts
• Extension Squaring Arm
• Vibration Pads
• Photo-Electric Guard

Note : Electrical motor and blades are not under warranty.    

Our Pneumatic Shearing Machines have Been Designed & Developed Through Structural Analysis Technique for Continuous Production, Accuracy and Repeatability.
 

Frame :
The Frame is Rigidly Constructed from Solid Steel Plates with Safeguards. Its Interlocked Design Provides Support to the Bed Directly On the Frame to Avoid Weak Sections At Load Supports.
Hold Down System :
Spring Loaded Mechanical Hold Down System is Provided to Hold the Sheet Securely to Avoid Slipping and Bowing. the Pressure of Each Hold Down Unit is Ample to Securely Hold Even Shorter Pieces Under One Hold Down. the Increase/decrease of Pressure of Hold Down is Adjusted Through Cam By Adjustable Lever and Rods.
Knives :
Each Machine is Provided with Four Edge Rectangular High Quality High Carbon High Chromium (hchc) Knives for Longer Life.
Fly Wheel :
Fly Wheel of Cast Iron Designed to Cater for Sufficient Energy Required for Operation, Brakes Provided On Request and Mounted On Quill for Higher Capacity, in Both Cases. Fly Wheel is On Antifriction Bearings.
Pneumatic Cluster & Brake :
Pneumatic Clutch & Brake is Designed for Excellent Torque Transmission Power, Low Inertia/high Torque, Combined with Single-disc Type with Sufficient Fins/ribs for Dissipation of Heat, Pneumatically Synchronized. Clutch Operating Under Pneumatic Pressure Released By Spring, Brake Operating On Spring and Released Pneumatically. for Higher Torque, the Clutch and Brake are Provided Separately. Single Solenoid Valve At Air Entry & Quick Exhausts for Addition Safety.
Mechanical Back Gauge :
This Equipment is Provided with Scale to Give Instantaneous Reading of Distance Between Shear and Back Gauge to Avoid Errors.
Finger Guard :
To Avoid Accident, Finger Guard is Fitted in Front of Hold Down System for Operator's Protection Without Obstructing His View.
Lubrication :
All Moving Parts are Provided Lubrication By Motorized Pump for Smooth Operation.

      
Standard Accessories& Features :

• Pneumatic Clutch
• Quick Exhausts
• Air Preparation Unit
• Gear & Wheel Guard
• Hand Operated Back Gauge
• Motorized Lubrication Pump
• Electric Panel
• Two Hand Box
• Emergency Stop
• Batch Counter
• Pressure Sensor
• T-Slot Front Supporters
• Front Scale Gauge.
• Single Stroke/ Semi-Cotni, Continues Stroke/ Inching
• Buzzer
• Foot Switch
• Motor, Vee Belts, Pulley
• Volt Meter

Optional Accessories :

• Ball Roller Or Ball Transfer
• Foundation Bolts
• Extension Squaring Arm
• Vibration Pads
• Photo-Electric Guard

Note : Electrical motor and blades are not under warranty.