Listing ID #4417617
Company Information
Ask for more detail from the seller
Contact SupplierThe new UNO-DM-PLUS singlephase inverter family, with power ratings from 1.2 to 3.0 kW, is the optimal solution for residential installations.
One size fits all
The new design wraps ABB’s quality and engineering into a lightweight and compact package thanks to technological choices optimized for installations with a uniform orientation. All power ratings share the same overall volume, allowing higher performance in a minimum space.
Easy to install, fast to commission
Smart capabilities
The embedded logging capabilities and direct transferring of the data to Internet (via Ethernet or WLAN) allow customers to enjoy the whole Aurora
Vision® remote monitoring experience.
Highlights
Type code | UNO-DM-1.2-TL-PLUS | UNO-DM-2.0-TL-PLUS | UNO-DM-3.0-TL-PLUS |
---|---|---|---|
Input side | |||
Absolute maximum DC input voltage (Vmax,abs) | 600 V | ||
Start-up DC input voltage (Vstart) | 120 V (adj. 100…150 V) | 150 V (adj. 100…250 V) | 150 V (adj. 100…250 V) |
Operating DC input voltage range (Vdcmin...Vdcmax) | 0.7 x Vstart...580 V (min 90 V) | ||
Rated DC input voltage (Vdcr) | 185 V | 10.0 A | 300 V |
Rated DC input power (Pdcr) | 1500 W | 2500 W | 3300 W |
Number of independent MPPT | 1 | 1 | 1 |
Maximum DC input power for each MPPT (PMPPTmax) | 1500 W | 2500 W | 3300 W |
DC input voltage range with parallel configuration of MPPT at Pacr | 100…530 V | 210...530 V | 320...530 V |
DC power limitation with parallel configuration of MPPT | N/A | N/A | N/A |
DC power limitation for each MPPT with independent configuration of MPPT at Pacr, max unbalance example | N/A | N/A | N/A |
Maximum DC input current (Idcmax) / for each MPPT (IMPPTmax) | 10.0 A | 10.0 A | 10.0 A |
Maximum input short circuit current for each MPPT | 12.5 A | 12.5 A | 12.5 A |
Number of DC input pairs for each MPPT | 1 | ||
DC connection type 1) | Quick Fit PV Connector | ||
Input protection | |||
Reverse polarity protection | Yes, from limited current source | ||
Input over voltage protection for each MPPT-varistor | Yes | ||
Photovoltaic array isolation control | According to local standard | ||
DC switch rating for each MPPT (version with DC switch) | 25 A / 600 V | ||
Output side | |||
AC grid connection type | Single-phase | ||
Rated AC power (Pacr @cosφ=1 ) | 1200 W | 2000 W | 3000 W |
Maximum AC output power (Pacmax @cosö=1) | 1200 W | 2000 W | 3000 W |
Maximum apparent power (Smax) | 1200 W | 2000 W | 3000 W |
Rated AC grid voltage (Vac,r) | 230 V | ||
AC voltage range 2) | 180...264 V | ||
Maximum AC output current (Iac,max) | 5.5 A | 10.0 A | 14.5 A |
Contributory fault current | 10.0 A | 12.0 A | 16.0 A |
Rated output frequency (fr) 3) | 50/60 Hz | ||
Output frequency range (fmin...fmax) 3) | 47...53/57...63 Hz | ||
Nominal power factor and adjustable range | > 0.995, adj. ± 0.1 - 1 (over/under excited) | ||
Total current harmonic distortion | < 3.5% | ||
AC connection type | Female connector from panel | ||
Output protection | |||
Anti-islanding protection | According to local standard | ||
Maximum external AC overcurrent protection | 10.0 A | 16.0 A | 16.0 A |
Output overvoltage protection - varistor | 2 (L - N / L - PE) |