Process calibrator

Listing ID #4380149

7.05 Lakh / Piece

Get Latest Price

Weight 1.2 kg (2.7 lb)
Dust/water resistanceMeets IP52, IEC 529
Data storage capacity1 week of calibration procedures results
BatteriesInternal Battery Pack Li-ion: 7.2V, 4400mAh, 30 Wh
Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

View More Details

Send Enquiry

Product Details

Weight 1.2 kg (2.7 lb)
Size 136 x 245 x 63 mm (5.4“ x 9.6 x 2.5)
Data storage capacity 1 week of calibration procedures results
Operating Temperature -10 °C to +50 °C
Dust/water resistance Meets IP52, IEC 529
Storage Temperature -20 °C to +60 °C
Batteries Internal Battery Pack Li-ion: 7.2V, 4400mAh, 30 Wh

The 754 combines HART communication capability in a documenting process calibrator to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART instrumentation.

The 754 offers:

• Integrated HART communication functions,permitting you to monitor, control, and calibrate HART instrumentation.
• Handling of fast pulsed RTD transmitters and PLCs,with pulses as short as 1 mS.
• Li-ion battery with 4400 mA hour life and gas gauge.

Technical Specifications:

Manufacturer

Fluke

Model

Fluke-754

Voltage DC

1 Year 2 Years

100.000 mV 0.02%+0.005 mV 0.03%+0.005 mV

3.00000 0.02%+0.00005 V 0.03%+0.00005 V

30.0000 V 0.02%+0.0005 V 0.03%+0.0005 V

300.00 V 0.05%+0.05 V 0.07%+0.05 V

Voltage AC

Range

40 to 500 Hz

Resolution

1 Year

2 Years

3.000 V 0.001 V 0.5%+0.002 1.0%+0.004 V

30.00 V 0.01 V 0.5%+0.02 V 1.0%+0.04 V

300.0 V 0.1 V 0.5%+0.2 V 1.0%+0.2 V

Current DC

1 Year 2 Years 30.000 mA 0.01% + 5 uA 0.015%+7 uA

110.00 mA 0.01% + 20 uA 0.015%+30 uA

Data Log Functions

Measure functions:	Voltage, current, resistance, frequency, temperature, pressure
Reading rate:	1, 2, 5, 10, 20, 30, or 60 readings/minute
Maximum record length:	8000 readings (7980 for 30 or 60 readings/minute

Ramp Functions

Source functions:	Voltage, current, resistance, frequency, temperature
Rate:	4 steps/second
Trip detect:	Continuity or voltage (continuity detection not available when sourcing current)

Loop Power Function

Voltage:	Selectable, 26 V
Accuracy:	10%, 18 V minimum at 22 mA
Maximum current:	25 mA, short circuit protected
Maximum input voltage:	50 V DC

Step Functions

Source Functions	Voltage, current, resistance, frequency, temperature
Manual Step	Selectable step, change with arrow buttons
Autostep	Fully programmable for function, start delay, stepvalue, time per step, repeat