SPECIFICATION FOR DUAL POWER SUPPLY,
MODEL NO:UE-DPS-25
1. Input : 230V, +10%, 50Hz, Single phase
2. Out Put : a) 0 � 15V/0-1A Dual output continuously variable by coarse & fine potentiometers
mounted on Front panel
3. Line Regulation : Better than + 0.01%+ 2mV for input line change from 207V AC to 253V AC and vice versa
4. Load Regulation : Better than + 0.01% + 2mV for a load change from no-load to full load and vice versa.
5. Ripple & noise : Less than 2mV R.M.S.
6. Protections : a) Unit is protected against input surges through Line filter
b) All the outputs are protected against overloads and continuous short circuits
c) All the outputs are fuse protected
7. Indications : a) One LED for input AC
b) One DC LED for each output
c) One 3�½digit Digital Voltmeter and one 3�½digit Digital Ammeter with a selector switch to read both Voltage and Current of each output
8. Controls : a) ON/OFF switch to ON/OFF the Unit
b) AC fuse
c) DC fuse separately for each output
f) Two separate 3 �½ digit digital panel meters to monitor output voltage & current continuously will be provided with a 4 pole/3way Rotary
Switch.
9. Terminals : a) Input is given through 3 pin power card
b) All the outputs are terminated on Piri Terminal
strip with remote sensing facility at the rear of
the unit. All the outputs are also brought on to
the Front Panel on Banana Sockets
10. Operating temperature : 0 - 50�ºC
11. Cooling : Natural air cooling/Forced air cooling
12. Mechanical : Bench top Model

SPECIFICATION FOR DUAL POWER SUPPLY,
MODEL NO:UE-DPS-25
1. Input : 230V, +10%, 50Hz, Single phase
2. Out Put : a) 0 � 15V/0-1A Dual output continuously variable by coarse & fine potentiometers
mounted on Front panel
3. Line Regulation : Better than + 0.01%+ 2mV for input line change from 207V AC to 253V AC and vice versa
4. Load Regulation : Better than + 0.01% + 2mV for a load change from no-load to full load and vice versa.
5. Ripple & noise : Less than 2mV R.M.S.
6. Protections : a) Unit is protected against input surges through Line filter
b) All the outputs are protected against overloads and continuous short circuits
c) All the outputs are fuse protected
7. Indications : a) One LED for input AC
b) One DC LED for each output
c) One 3�½digit Digital Voltmeter and one 3�½digit Digital Ammeter with a selector switch to read both Voltage and Current of each output
8. Controls : a) ON/OFF switch to ON/OFF the Unit
b) AC fuse
c) DC fuse separately for each output
f) Two separate 3 �½ digit digital panel meters to monitor output voltage & current continuously will be provided with a 4 pole/3way Rotary
Switch.
9. Terminals : a) Input is given through 3 pin power card
b) All the outputs are terminated on Piri Terminal
strip with remote sensing facility at the rear of
the unit. All the outputs are also brought on to
the Front Panel on Banana Sockets
10. Operating temperature : 0 - 50�ºC
11. Cooling : Natural air cooling/Forced air cooling
12. Mechanical : Bench top Model