Our Products
Details
Stock No. | Description |
---|---|
WP-18 | Torch body, incljdes cup gasket |
57Y02 | Long back cap, includes 98W18 0 -ring |
57Y04 | Short back cap, includes 98W18 0 -ring |
54NO1 | Gas lens insulator |
- | Gas lens (See chart A) |
- | Alumina gas lens nozzle(See chart B) |
54N63 | Lg. diameter gas lens insulator |
- | Lg diameter gas lens (See chart A) |
- | Lg. diameter gas lens nozzle(See chart B) |
18CG | Cup gasket |
- | Collet (See chart A) |
- | Collet body (See chart A) |
- | Alumina nozzle (See chart B) |
- | Lava nozzle (See chart B) |
18CG 20 | Stubby gasket |
- | Stubby collet (See chart A) |
- | Stubby collet body (See chart A) |
- | Stubby alumina nozzle (See chart B) |
- | Long lava nozzle (See chart B) |
45V11 | Power cable adapter |
WP-18SP | Pencil torch body .includes cup gasket |
H-200 | Handle (smooth, standard on WP 18.18SP) |
- | Water tiose 40V74 12 1/2 ft (3, 8m) 41V32 25ft. (7,6m) |
- | Power Cable 40V64 12 1/2 ft 41V29 25ft (7,6m) |
- | Gas hose 40V 75 12 1/2ft (3,8m) 41V30 25ft (7,6m) |
WP-18V | Valve torch body, includes cup gasket and Valve stem. |
VS-2 | Valve stem, includes S-008 0 -ring |
Specifications
Wirefeed Speed Range | 0-16 m/min |
---|---|
Wire sizes accomodated | 0.8 to 1.2 mm for MIG 250 0.8 to 1.6 mm for MIG 400 |
Specifications
Details | Thyro MIG 300 | Thyro MIG 400 ^ |
---|---|---|
Dc Power Source For Mma W/Tig Welding | Thy - 300 | Thy - 400 |
Control Method | Thyristor Hexa phase | Thyristor Hexa phase |
Input Phases Input Voltage Input Frequency | 3 Phase 415 V +/-10% 50 Hz | 3 Phase 415 V +/-10% 50 Hz |
Rated Input | 13.1 KVA Maximum | 20 KV A Maximum |
Output Current-Amps | 50-250 | 50-400 |
OCV-VDC | 60 | 60 |
Rated Duty Cycle 60% 100% | 250 Amps. 210 Amps. | 400 Amps. 310 Amps. |
Puking Parameters
Pulsing Frequency | 0.8 Hz To 10 Hz |
---|---|
Up Slope | 0 To 3 Sec. |
Down Slope | 0 To 3 Sec. |
Post Flow | 0 To 3 Sec. |