Verified
Add Review
Our Products
We offer a complete product range of VDRL Rotary Shaker, Digital Tintometer, Slide Warming Table, MICROPROCESSOR BASED PHOTO COLORIMETER and Tissue Culture Hood
Tintometer is a kind of visual colour measuring instrument. It measures colour scale unit which is an international acknowledged specific colour method as a standard to measure the colority of liquid, gelatin, solid and powder samples. This Instruments has the features of simple structure and convenient operation and often used in the colour measurements of different materials of grease, paint, plastic, jam textile, fabric, foodstuff, liquid chemicals and pharmaceuticals.
It is very useful for heating slides to a uniform constant temperature below the melting point of wax. The surface temperature is controlled by thermostat from ambient to 90°C. To work on 220/230 volts A.C. supply.
Microprocessor Photo Colorimeter LIM-127 is a compact and easy to operate instrument for Photo Colorimeter analysis of any concentration. The output is available on a 16 x 2 line alphanumeric backlit LCD display in terms of %Transmission (%T), Absorbance (Abs.), Concentration (Conc.), and K Factor. The use of microcontroller has made it extremely versatile and accurate instrument 10 mm path length matched test tubes are used for sample and blank. Facility has been provided to store the last K Factor and the standard concentration value. User can also enter any known 'Factor' for a test, thereby eliminating the need to re-run the standards again and again.
Features :
Double walled construction with inner chamber made of stainless and outer wall made of M.S. sheet Duly powder coated painted. The concentric rings can be removed to accommodate containers of various sizes. Temp. from ambient to 95°C ±2°C is to controlled by thermostat. Made out of heavy gauge S.S. 304 with concentric rings. Works on 220/230 volts A.C. supply.
Features :
Double wall , glass window on both opposite side, temp. 5°C to 95°C accuracy ±5°C to work 220-240 volt AC. Fitted with digital temp. Indicator-cum-controller instead of contact thermometer (optional).
Features :
Thermostatically controlled. Double walled. Inner chamber of black oxidized aluminium sheet.
Ideal heater for the extractors of Soxhlet and other types. This apparatus is suitable to heat soxhlet flask of 50- 500ml. It consists of M.S. sheet housing, two vertical & two horizontal rods With adopters and screws to hold the flask. Works on 220/230 A.C. Supply. Supplied without glass parts.
Thermostatically controlled. Double walled with cups and shelves for glass tubes. Temp. upto 95°C with an accuracy of ±1°C. Chamber made of Stainless steel.
It is a double walled unit with inside and outside made of thick Stainless Steel sheet prevent failing of condensed water droplets on the specimens. Heating is achieved through an immersion type heater and the temperature is controlled by digital temperature indicator-cum-controller or thermostat. The bath has an oscillating tray riding on ball rollers oscillated through a geared variable speed motor. The shaking tray can either hold test tubes or Erlenmeyer flasks of 25 ml or 50 ml or 100 ml or 250 ml or 1000 ml. as ordered by the users. (Kindly mentioned the capacity of the flasks while ordering). Works on 220 / 230 volts A.C. supply. Available only heating arrangements (having temperature range from ambient 90°C).
Features :
Features :
The equipment has a very casted top with room for heating 40 digestion tubes of 75ml. Each heating elements are speared uniformly so that the entire casted top, and thus the tubes, attain the same temperature throughout. Temperature is controlled by Digital Temp. Controller. The gap between the elements and outer M.S. painted wall is fitted with high grade mineral wool to avoid thermal loss. To work on 220 / 230 volts A.C. Supply 40 tubes dia 24 mm.
Features :
Most versatile for Biochemical Oxygen Demand determinations. Castor wheel mounted cabinet is double walled with inner chamber S.S. and outer wall of M.S. Sheet duly powder coated. The gap between the outer and the inner wall is fitted with special grade glass wool to prevent thermal losses. Temp. range 5C to 60C with accuracy of ± 0.5C .Unit is fitted with air circulation fans for maintaining temperature uniformity through out the chamber. Fully view inner glass/Acrylic door permits inspection of specimens, without disturbing the same. Lock and key arrangement is provided in the double walled outer door. Unit is formed by compressor. The front panel is provided with separate indicator lamps-cum-switches for Main, Heating and Cooling. Works on 220 / 230 Volts A.C. supply.
CONSTRUCTIONBOD Incubators are double walled convection heated units. Outer body of our incubators are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of S.S-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our BOD incubators. The unit is provided with two doors , the inner door is made of thick plexi glass/float glass to view the specimens without disturbing the temperature of the chamber. This door is provided with magnetic door closer. The outer door is made of mild steel sheet lined with stainless steel from inside. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame and provided with castor wheels for easy movement inside the laboratory. The unit is provided with three stainless steel shelves. The triple walled back of our B.O.D incubators are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber.
Features :
Auto Karl Fischer Titrimeter LIM-241 is an automatic apparatus designed to carry out Karl Fischer Titrations for accurate determination of moisture content in various samples. The instrument comprises of two units i.e CONTROL UNIT & TITRATION UNIT. The CONTROL UNIT controls the complete automatic titration. On pressing the START button, the titration starts and the KF reagent is added automatically from the burette, through a solenoid valve into the titration vessel. As soon as the end point is reached, the titration is stopped automatically by the Control Unit. It has fully solid state circuitry incorporating advanced IC technology.
Features :
The most time consuming part of carrying out a microbial count is the actual counting process on petri-dishes. Digital Colony Counter is designed for quick and accurate counting of bacterial and mould colonies in petri dishes. Feature packed and easy to use, this is an indispensable bench top tool for the busy microbiologist. It is designed for rapid and accurate counting of bacterial and mould colonies. Simply place the petri dish on the illuminated pad and touch the dish with the pen provided to mark each colony in turn. This causes a count to be registered on the digital display and an audible tone confirms each count made. Marking the dish with the pen avoids missing colonies or double counting. The digital count on the display can be reset manually any time by pressing reset key provided. Optimum viewing of colonies is aided by peripheral glare free illumination graticuled disc provided in the instrument. The magnifier magnifies the colony area. This is an indispensable tool for the microbiologist.
Features :
The cabinet are fabricated out of thick board duly sun mica clad interior surface are epoxy painted for its longer life. The work table is made of thick board which is S.S. 316 Qlty. clad at top. Side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre filter & HEPA filter. Air is drawn through pre filter & is made to pass through highly effective.
Features :
These are sturdy double walled units with outer chamber made of M.S. sheet duly powder coated inner made up of anodised aluminium or S.S. 304. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. The door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test Temperature. Temperature is controlled by thermostat from ambient to 90°C ±0.5°C. Air ventilators are also provided on the sides of unit. To work on 220 / 230 volts A.C. supply.
CONSTRUCTIONBacteriological Incubators are double walled convection heated units. Outer body of our incubators are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of S.S - 304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our bacteriological incubators. The unit is mounted on a sturdy steel frame and provided with castor wheels (Large Sized Models Only) for easy movement inside the laboratory. The unit is provided with one to three stainless steel shelves (As per the inner size).
Features :
We are manufacturers of plant growth chambers in India since decade. Our plant growth chamber rare conceptualized and designed to create test chambers to study and contemplate the effects of different environmental parameters such as humidity, temperature and light in various applications tests involving micro-organisms, plants, tissues, and animals etc apart from various customized industrial and research applications.
Our plant growth chambers have a variety of usage in R & D laboratories and research studies across the globe. Apart from that, these plant growth chamber have a variety of usages in tissue culture applications, enzyme reaction studies, growth observation studies, fermentation analysis and various other general and specialized applications in various laboratories.
Features :
High standard glass a rotating disc. Highly sensitive photo sensor and use of latest IC technology makes the instruments highly rugged, accurate & economical in maintenance. A minimum sample volume of 1ml is required to carry out the analysis. Provision has been made to switch on the lamp source only when required, thereby increasing the life of the photocell. The instruments are extremely useful for quantitative estimation of several chemical substances including blood chemistries in chemical/clinical labs, pharmaceutical industries, medicine plants, water treatment plants, agriculture universities etc.
Features :
Most versatile for Biochemical Oxygen Demand determinations. Castor wheel mounted cabinet is double walled with inner chamber S.S. and outer wall of M.S. Sheet duly powder coated. The gap between the outer and the inner wall is fitted with special grade glass wool to prevent thermal losses. Temp. range 5C to 60C (BOD Shaker)with accuracy of ±1C .Unit is fitted with air circulation fans for maintaining temperature uniformity through out the chamber. Fully view inner glass/Acrylic door permits inspection of specimens, without disturbing the same. Lock and key arrangement is provided in the double walled outer door. Unit is fitted with flurocent illumination lamp inside the chamber (as per customer requirement). Refrigeration unit is formed by compressor. The front panel is provided with separate indicator lamps-cum-switches for Main, Heating and Cooling. Works on 220 / 230 A.C. supply.
Features :
The inner chamber is provided with the unit as a standard accessory. Temperature from ambient to 90°C is controlled by thermostat with an accuracy of ±1°C. Supplied complete with 220/230 volts A.C. supply.
Features :
Labard environmental chambers are double walled convection heated and cooled units. Outer body of our environmental chambers are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of S.S-304 grade or anodized aluminum sheet or G.I. (as per the customer's requirements). The gap between the walls is fitted high grade mineral glass wool, which ensures maximum thermal efficiency in our walk in incubators.
Features :
We are manufacturers of Fume hood, chemical fume hood in India since 1990. Our chemical bench fume hoods are indispensable and a pre-requisite in practically all chemical laboratories that handle toxins and hazardous chemical fumes and effulent. Our fume hood capture the fumes/effulent released during any given experiment, contain them in the enclosure and then emit through their well designed exhaust system.
Suitable for carrying out different quality control tests under controlled conditions of temperature & humidity. Inner chamber consists of S.S. & outer wall of M.S. sheet duly powder coated. The gap 75mm between the outer & inner wall is fitted with special grade glass wool to prevent thermal losses. A self cooler air circulation fan is fitted to maintain uniform Temp. & humidity conditions throughout the chamber temp. range from 5°C above ambient to 60°C is controlled by MICRO PROCESSOR DIGITAL TEMP./HUMIDITY CONTROLLER with the accuracy of ±3°C. Temp. Humidity is controlled through the desire set humidity range from atmospheric humidity to 90% ±3%.
Features :
Outer Body is made of thick mild steel sheet duly powder coated and inner chamber is made of S.S. Lid is also double walled properly insulated. Whole unit is mounted on a sturdy angle frame. Insulation is done by thick glass wool to prevent any heat loss. The cooling is done through CFC FREE hermetically sealed compressor and for attaining the Temp. above ambient, heating is done with immersion type heating elements. Temperature range is from -5°C to 60°C controlled by Digital Temp. Indicator-cum-Controller. Works on 220 / 230 volts A.C. Supply. The Unit is also fitted with a FHP pump for circulating the cooled liquid to an external source such as Condenser coils etc. Unit is mounted on four wheel base for easy movement.
Features :
Labard seed germinator are double walled convection heated and cooled units (Double/Single chamber Units). Outer body of our seed germinator are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade or anodized aluminum sheet or G.I. (as per the customer's requirements). The gap between the walls is fitted high grade mineral glass wool, which ensures maximum thermal efficiency in our walk in incubators.
Features :
Double walled chamber has inner made up of thick S.S. and outer wall is of thick MS sheet duly Powder Coated. A glasswindow is provided on the front side for an easy inside view. A high speed stirrer with a motor of 1/20 H.P. A speed regulator & digital indicator controller is provided on the front panel to control speed of the stirrer and temperature of bath. The heating mechanism comprises of set of heaters pertaining to faster and slower heating Controls the temperature with a sensitivity of ±0.1°C, from ambient to 100°C. To work on 220/230 volts A.C. supply.
Features :
Thane, Maharashtra