Prithvi Precision Engineering Pvt. Ltd

Mulund West, Mumbai, Maharashtra

Available in capacities of 0.75 TON to 30 TONS, we offer an extensive range of high quality Air Conditioners. In conformity with the set industry rules, we Manufacture, Export and Supplier of energy efficient Air Conditioners with long service life. Before supplying, our quality analysis team makes sure that Air Conditioners qualify on all quality benchmarks. We have earned the trust of our clients for our affordable prices and timely delivery of all orders.

The Features : 

• Easy Pullout Filter
• 4 Way Air Deflection
• Auto Air Sweep
• Reciprocating Compressor
• Optional Electronic Controls
• Multi Filter System, Anti Bacterial Filter & Carbon Filter
• High energy efficiency ratio- low operating costs

Technical Features : 

• Kirloskar Copeland Compressor renowned for their quality and dependability
• Inner Grooved copper tubing for increased heat exchange efficiency
• Redesigned condenser fan for a longer and trouble free performance
• More internal insulation provided for a quieter performance
• Sturdy plastic inside make it rust-free and lighter unit
• Easy Pullout Chassis.

block ice plants offered by us are developed by a team of experienced professionals, in tandem with the norms and guidelines already laid down by the industry.

offered range of plant consist a brine tank, an electrically operated crane, a thawing tank, a tilting device with an inclined wooden table to receive the ice blocks as they slide out of the cans and filler.

the ice machine & harvesting section of the plant consists of the brine tank, an electrically operated lifting device (crane) running on rails along the sides of the tank, a thawing tank, a tilting device with an inclined wooden table to receive the ice blocks as they slide out of the cans and a filler. Standard rectangular 25, 50 & 150 kg ice cans, the brine tank is covered with solid wooden lids as shown on the picture.

the machine room occupies the rear the machine room accommodates the brine chiller with the liquid separator the brine recirculation pump the air or water cooled condenser the refrigerant receiver the electric switch board and other accessories which are connected to one another through refrigerant and brine piping as shown on the piping diagram and the electrical wiring cold pips and vessels are insulated as required.

the refrigerant evaporating in the brine chiller cools the brine the cold carrier which is recirculated by the brine pump from the brine tank through the brine chiller and back to the brine tank. The recirculated quantity is sufficient to facilitate adequate agitation in the brine tank. Removal of the process heat takes place in the air or water cooled condenser. Liquid refrigerant collects in the liquid receiver from where it passes over an expansion device back to the brine chiller.

the refrigeration capacity required to maintain the temperature in the ice storage is small compared to that of the block ice plant, therefore, to simplify design and minimize service and maintenance work, the ice storage is cooled with the ice storage is cooled with an air-cooler refrigerator through brine pumped from the brine tank, for which a small brine pump is provided.

the two main sections of the plant, namely the ice making & harvesting and the machine room & ice storage are placed side by side on the installation site and interconnected by the supply and return lines for the brine and electric power supply for harvesting and lighting.

application

• cooling.
• food preservation.
• distance transportation.
• fresh keeping for aquatic products.
• ice factory of the ports and docks.
• special areas of cooling
• advantages
• capacity modulation and precision cooling
• high energy efficiency
• compact
• ozone-friendly refrigerants
• proven technology
• wide voltage range
• superior quality wear resistant part
• steel fabricated acc(air cooled condenser), low vibration, and low noise level.

Backed by a team of experienced engineers, we are known for offering precisely designed Ice Block Making Plant. Using latest technology, we Manufacture, Export and Sup ply high performance Ice Block Making Plant that is highly appreciated for its energy efficiency, easy to install feature and long service life. Passed on all quality parameters, we make sure that only best and cost-effective Ice Block Making Plant reaches our buyers. We always deliver on time.

Description

The Ice Making & Harvesting section of the plant consists of the Brine Tank, an electrically operated Lifting Device (Crane) running on rails along the sides of the tank, a Thawing Tank, a Tilting Device with an inclined Wooden Table to receive the ice blocks as they slide out of the cans and a Filler. Standard Rectangular 25, 50 & 150 kg Ice Cans, the brine tank is covered with solid Wooden Lids as shown on the picture.
The Machine Room occupies the rear, the Machine Room accommodates the Brine Chiller with the Liquid Separator, the Brine Recirculation Pump, the Air or water Cooled Condenser, the Refrigerant Receiver, the Electric Switch Board, and other accessories which are connected to one another through refrigerant and brine piping as shown on the Piping Diagram and the electrical wiring. Cold pips and vessels are insulated as required.
The refrigerant evaporating in the Brine Chiller cools the brine - the cold carrier - which is recirculated by the Brine Pump from the Brine Tank through the Brine Chiller and back to the Brine Tank. The recirculated quantity is sufficient to facilitate adequate agitation in the Brine Tank. Removal of the process heat takes place in the Air or water Cooled Condenser. Liquid refrigerant collects in the Liquid Receiver, from where it passes over an expansion device back to the Brine Chiller.
The refrigeration capacity required to maintain the temperature in the Ice Storage is small compared to that of the Block Ice Plant. Therefore, to simplify design and minimize service and maintenance work, the Ice Storage is cooled with an Air Cooler refrigerated through brine pumped from the Brine Tank, for which a small brine pump is provided.
The two main sections of the plant, namely the Ice Making & Harvesting and the Machine Room & Ice Storage , are placed side by side on the installation site and interconnected by the Supply and Return Lines for the brine and Electric Power Supply for Harvesting and Lighting.

Highly demanded in the market, we offer custom engineering capabilities Heat Exchangers that are made from finest carbon steel. Since 1996, we are a well-known Manufacturer, Exporter and Supplier of high performance Heat Exchangers. Made in compliance with all quality standards, our quality assurance team makes sure that Heat Exchangers are energy efficient and have long service life. With a vast distribution network, we are capable of delivering all orders on time. For competitive prices, contact us. 

Dimensions : The diameters vary from 300mm (12") to 760mm (30"), lengths vary from 750mm to 6000mm. Shells up to 300mm (12") are made from welded pipes and above 300mm are made from rolled plates. Water heads are fabricated from M.S. plates.

Capacities : From 10KW (3TR) to 1750KW (500TR)

• Custom blast freezer innovations include bimetallic couplers, low temperature (-40) DX ammonia evaporator system with smart hot gas defrost, anti-microbial fin materials and coil construction, sanitary design evaporators for food processing applications, low temperature (-40) water defrost and corrosion resistant coil construction. Long air throw adapters are available to increase air throw to 300 ft. Fans can be specified for demanding applications with tightly packed product such as blast freezing or pressure cooling. Fan arrangement options include 450 down discharge, horizontal discharge, blow through and draw through.

Insulated panels for cold rooms with cam lock-instacold prime (SCL/DCL)Rigid poly urethane foam insulated panels suitable for cold room application, cam lock with single/double tongue and groove. Thickness 60 - 200mm. Standard lamination - PCGI. Options for ss.

Insulated panels for roofing - COOLTOPRigid poly urethane foam insulated panels suitable for roofing application, with thickness 30 - 150mm. Standard lamination - PCGI. Options for aluminium foil bottom lamination.

Insulated panels for building-instabuild prime (STG/BTB)Rigid poly urethane /poly isocynurate foam insulated panels suitable for building construction application, with thickness 40 - 150mm. Standard lamination - PCGI.

Insulated panels for building-instabuild mystic (FS/SG/MG)Rigid poly urethane /poly isocynurate foam insulated panels suitable for building construction application, with thickness 50 -150mm. Standard lamination - PCGI. Secret fixing provision, with three different serration.

Insulated ducting panelRigid poly urethane /poly isocynurate foam insulated panels suitable for ducting work - 20/30mmthk with aluminium foil lamination

Insulated panels for clean room building-instabuild hyper clean (EBP)Rigid poly urethane /poly isocynurate foam insulated panels suitable for building construction application, with thickness 50-150mm. Standard lamination - PCGI. With edge profile.