Prism Hydraulics Pvt. Ltd.

Udyambag, Belgaum, Karnataka

the bell housing series bh are designed for coupling hydraulic pumps having iso flanges to electric motors having metric flanges. The correct alignment of the shafts along with the cushioned power transmission through resilient spider increases the life of the bearings of the pump motor coupled. The construction reduces the noise generation considerably.

Seat type valves. Connects its port P to either port A or port B depending upon whichever of two is at higher pressure level. Isolates port A and B from each other. Port P gets connected to tank only if port A and port B are connected to tank. Available in both threaded and subplate type.

Intended for prefilling and exhausting of large hydraulic cylinders. Can be used as anticavitation check valves. Decompression feature is optional upto size 80

Designed to control the opening & closing of the cartridge valveProvision for remote controlNormally used for check valve function

Designed to control the opening & closing of the cartridge valve Provision for remote control Provision for solenoid relieving(Normally open or Normally closed)

Designed to control the opening & closing of the cartridge valve Cover has a built-in seat type shuttle valve.

Non adjustable differential type. Spring loaded, sealed piston contruction, encapsulated design for protection against dirt. Six pressure ranges which can be adjustable upto 10, 50, 100, 200, 350 & 420 bar. Transperent plug-in connector is available with LED

Heavy duty construction, Renewable internal parts by repalcement, Integral Relief & Release valves.Collapsible Hand lever movement at low pressure.

Automatic change -over from high discharge at low pressure to low discharge at high pressure. Renewable internal parts by repalcement, Integral Relief & Release valves.Collapsible Hand lever movement at low pressure for compact size.

Rugged low cost pumps with all parts renewable by replacement Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of the shaft.Available with extension shaft / bracket for through drive and to couple low pressure pump. For coupling the pumps to electric motors standard bell housing assemblies are available.

Pumping Element assembly for 1RP / 2RP Fixed Delivery

The Bell Housing series BHP are designed for coupling Prism make pumps (1RP/2RP/11RP/12RP) to electric motors having metric flanges. The correct alignment of the shafts along with the cushioned power transmission through resilient spider increases the life of the bearings of the pump / motor coupled. The construction reduces the noise generation considerably.

The extension bracket series EB are designed to couplelow pressure pumps having ISO flanges to Prism make pumps (1RP, 2RP, 11RP &12RP series)These brackets are precisely machined to reduce the misalignment of the coupled shafts.The correct alignment of the shafts along with the cushioned power transmission through resilient spider increases the life of the bearings of the low & high pressure pump coupled.

Designed to control double pumps of HI-Low system. Unloads the low pressure pump when the system pressure rises above the unloader pressure Relieves the high pressure pump when the system pressure reaches the relief valve setting.

Flow divider valves provide dual flow from single source at pre-determined ratio, regardless of load. Maximum dividing error is < 5% Threaded port body.