Printpack Engineers

Marol, Mumbai, Maharashtra

We are offering oblique type single face paper corrugating machine. High speed single face paper corrugating machine (bush mounted) attached with motorized self loading twin shaft reel stand. The sturdily constructed machines incorporates all the features for high productivity with easy maintenance and operation.

• plc touch screen control system.
• one click for change of order. Servo drive control.
• with four set slitting knives.
• cross cut: 400 - 2600 mm.
• cut paper precision 1.5 mm.

we are offering flute laminating machines.

We are offering box making machine, the machine is designed for cutting & creasing the corrugated board simultaneously. Easy system to set the creasing and cutting dies.

We are offering reel to sheet cutting machine.

Paten punching machine Double flywheel frame work & double link pole mechanism makes the machine compact, sturdy & safe with high pressing power & lower noise. The double electromagnetic clutch makes the operation more sensitive, reliable and safe. Steeples variable speed drive for bigger size machines facilitates adjustment of working speed to improve working efficiency. Mobile chase system holds different kinds of cutting molds with ease. Centralised oil lubrication system guarantees fine lubrication.

Semi Auto flute laminator is suitable for pasting of paper board with paper board of 300 gsm & pasting of paper board of 150-600 gsm with two ply corrugated paper of ABCDE flutes.Features :Semi-Automatic Flute Laminator uses vacuum-sucking paper conveying type for the bottom paper and top paper is fed manually by hand while the operator is standing at the side of the machine. This type of design has the features of easy operation and maintenance.The core designed rubber roller together with knurled steel roller enhances the evenness of gluing, strength of stickness as well as lowering the production cost.Balance-tested rollers, tight assembling technique makes the machine runs quite stable.The machine adopts automatic glue supply and recyclable glue circulating system.Top or bottom sheet detectors are installed on the machine and the machines will automatically stop while shortage of sheets-either top or bottom one is detected.All materials are inspected according to ISO-9001 standard and the key parts such as gear and bearing are imported.The bottom sheet for this machine can be A, B, C, D, E, F flute corrugated sheet. It can do 3 to 5 ply board to sheet lamination or board to board lamination. The range for top paper can be 150-600 GSM.

High speed single face paper corrugating machine (Bush Mounted) attached with motorized self loading twin shaft reel stand. The sturdily constructed machines incorporates all the features for high productivity with easy maintenance and operation.

Maximum output 90 rft/minute

Size : - 42", 46", 52", 62", 84".

The machine is designed for cutting & creasing the corrugated board simultaneously. Easy system to set the creasing and cutting dies.

Motorized lifting & lowering: clamping releasing, right-left adjustment.Double rotary shafts with four arms.

• Effective width: 1200 to 2200mm
• Maximum paper roll diameter: 1500mm.

MACHINE IS EQUIPPED WITH AUTOMATIC FEEDING OF TOP & BOTTOM PAPER AT HIGH SPEED WITH HIGH PRECISION & BETTER FINISHING.

FRONT LAY REGISTRATION DESIGN COMPLIANT.

DOUBLE SERVO MOTORS TO CONTROL BOTTOM SHEETS TO GET THE FRONT LAY IN TIME & WITH ACCURACY.

• Appropriate paper: Top sheet 200-450g, Bottom sheet +250g
• A/B/C/E/F flutes
• Speed: 5500-6000 sheets / hour
• Sizes from 1300*1100 to 1600*1400mm.
• Power requirement: 12kw.

ALSO WITH PLC CONTROL SYSTEM [OPTIONAL]

FOR PASTING OF PAPER BOARD OF 180 GSM 600 GSM WITH TWO PLY CORRUGATED PAPERBOARD OF A/B/C/E FLUTES.

THE LAMINATOR USES VACUUM SUCKING PAPER MOVEMENT TYPE FOR THE BOTTOM PAPER & TOP PAPER IS FED MANUALLY BY HAND FOR EASY OPERATION & MAINTENANCE.

• Machine Length: 8m
• Speed: 0-60
• Size: 900*1100 to 1400*1400
• Power Requirement: 7.5kw

EVENNESS OF GLUING IS IMPROVED WIT THE CORE DESIGNED RUBBER ROLLER WITH KNURLED STEEL ROLLER. MACHINE HAS AUTOMATIC GLUE SUPPLY & GLUE CIRCULATION SYSTEM.

TOP & BOTTOM SHEET DETECTORS ARE INSTALLED. MACHINE WILL STOP AUTOMATICALLY IN CASE OF SHORTAGE OF SHEETS.

USED FOR HIGH SPEED STITCHING OF CORRUGATED BOXES FOR SPEED ACCURACY & FINISHING.TOUCH SCREEN OPERATION.AUTO ADJUST PAPERBOARD THICKNESS.

• Speed: 450 Stiches per minute.

THE TWO ROLLERS ADOPT HIGH QUALITY STEEL, AND THE WALL THICKNESS IS 40MM.

IT HAS BEEN SURFACE GRINDING AND EQUALIZATION TREATMENT TO INCREASE THE SMOOTHNESS OF OPERATION.

THE DIE CUTTING ROLLER IS ADOPTED THE DEVICE OF SQUARE TRANSFER MOTION, AND THE DISTANCE OF SQUARE TRANSFER MOTION IS 40MM, TRANSLATIONAL SPEED IS BALANCED AND REASONABLE.

IT IS EQUIPPED WITH AUTO RECOVERY DEVICE; IT CAN BE REPAIRED 4-5 TIMES IN NORMAL CONDITION.

AT THE SAME TIME , IT USING SPEED DIFFERENCE DEVICE WITHOUT OPERATOR INTERVENTION, AND AUTOMATIC ADJUST THE ROLLER SPEED. ENSURE THAT EACH BATCH OF CARTON SIZE IS FULLY CONSISTENT.

IT IS EQUIPPED WITH AUTOMATIC SPRAY LUBRICATION, WHICH GREATLY IMPROVES THE FUNCTIONING OF ACCURACY AND SERVICE LIFE, AND REDUCES OPERATING NOISE.

FOR FINE CUTTING & CREASING OF PAPER BOARD IN SINGLE OPERATION

• Stable paper transmission.
• Thin edge slitting.
• Fitted with auto grinders.
• Sizes available: 2000 & 2200 mm.

Also available with automatic feeder & automatic adjustment.

FOR CORNER CUTTING & SLOTTING, CREASING & EDGE CUTTING OF BLANKS IN SINGLE OPERATION

• Sizes available from 1200*2000 to 1600*3000 mm
• Chain feeder for easy operation.
• Automatic feeder for chain feeding also available.
• Motorised with numerical control for adjustment of slotting rotary position.
• Zigzag slotting knife with 7mm thickness made of alloy steel.

Also available with automatic feeder for chain feeding.

FOR GLUING FLAPS OF CORRUGATED BOXES

• Maximum feeding size: 2600mm.
• Minimum feeding size: 340 mm.
• Power: 2.5 kw.
• Speed: 40m/min

Model VM4

The machine is designed for cutting & creasing the corrugated board simultaneously. Easy system to set the creasing and cutting dies.

Size : - 65", 75", 85", 95", 105".

Model RJE

The machine is provided with three slotting cutters and one corner cutter. The dies are mounted on an eccentric shaft which causes them to move in an arc so that the board is slotted in a shearing manner. The dies can be moved and slot depth adjusted easily.

Size :- 65", 75", 85", 95", 105".

Model VM

The machines are sturdy compact in design & simple in operation & maintenance. The components are made of highest standard of appropriate metals and given precise heat treatment. The machine are perfectly accurate, the parts are interchangeable. The machine operates at speed of 300 stitches per minute.

Arm Lengths :- 20", 36", 42", 48", 60"

The sturdy machine cuts and creases and thickness of board in single operation. The pressure is uniform all over the plate and can be evenly controlled with the help of pressure control guides on both sides. The machine is equipped with electromagnetic clutch & brake which is perfectly effective and timing control dwell.

Suitable for Converting Rewound Rolls of BOPP Film Laminated Stock into Sheet from overlapped and Underlapped sheets can be processed.

Available Size:32 (80 cm)

Multi purpose Film Laminating Machine suitable for thermal and water-based film lamination with rewinding system.

All the models are equipped with Power pack Hydraulic system Silicon rubber roller Thermic fluid Heating with PID Controller Pneumatically controlled rollers for on-line sheet separator unit for models MPSS & TLS Heavy duty rewinding unit for model MPR Slitting & perforating units Digital Temperature Controller thermostatically controlled. Digital sheet counter Sheet Detector system.

Category:Thermal Lamination

Features:

• Laminates one side at a time in gloss / matt film.
• Paper thickness : 80 to 500 gsm
• Manual Feeding table of 1m Long
• Calendering Roller Diameter 250mm.
• Pressure of 2 ton Hydraulic Jacks
• Compact design with integrated operating points
• permit machine supervision by one operator.
• Short run up time
• Quick learning time
• Pneumatically controlled Sheet separator for
• Model MPSS & TLSS

Optionals:

• Stacker & Jogger at delivery for Model MP SS
• Reel to Reel attachment.

Technical Specifications

Model: MPR

Available Size: 24" / 32" / 42" (600/800/1050 mm.)

Paper Stock Range: 80-500 gsm

Max. Machine Speed: Mtrs/Min. 0-25 Mtrs.

Heating System: Thermic Fluid Heating With PID Controller

Power: 4000 Wts.

Electrical Supply: 2 H.P., 50/60 Hz. 220/240 Volts

Feeding: Manual