Prime Colorex

Bhandup West, Mumbai, Maharashtra

We are the leading exporter, supplier and manufacturer of Diesel Engine Cooling Liquid. Based in Mumbai, Maharashtra our treatment has especially been designed to overcome the undesirable characteristics that are usually found when using chromate or soluble oil corrosion inhibitors. The treated re-circulating water of cooling liquid is usually colorless. The leakage at the packing glands produces zero crystalline deposits or unsightly stains. You’ll also not experience any foam or carbonization at points of high transfer. It is an effective corrosion inhibitor that is non-chromate and non-abrasive. It is not a soluble oil and is pH buffered. Compatible with antifreeze it protects the Ferrous and copper bearing metals by Minimizing metal oxide deposits.

Info :

• Prevents acid attack
• Applicable where water is the heat source for the evaporator/distiller
• Reduces disposal and toxicity problems
• Safer to handle
• Does not damage seals, hoses packing
• No foam or carbonized deposits
• Not sensitive o overdosing
• Easily tested and controlled
• Dose not form fouling deposits when mixed with ethylene glycol
• Application and Use The recommend treatment level of PARAFIX-DEWT diesel engine cooling water treatment is 3000-4500ppm. This represents an initial dosage of 3.2 KG per ton of circulating water. Subsequent dosages are dependent upon the concentration found in the re-circulating water.
• Diesel engine cooling water treatment is an effective corrosion inhibitor for all the normal ferrous and copper bearing metals in a circulating water system. There are no deleterious effects on glands; etc. It is compatible with antifreeze materials will not form objectionable sludge's.
• Efficient heat transfer is assured since corrosion is held to ammonium and surfaces are maintained free of deposits. Diesel engine cooling water treatment is recommended for systems with good quality distilled water makeup.

Based in Mumbai, Maharashtra our Liquid Hand Soap is very efficient and effective in removing the grease and dirt. It assures deep cleaning and is extremely mild. It is even beneficial to the skin and has a pleasant fragrance. We are the leading exporters, suppliers and manufacturers of liquid hand soap and our soap is absolutely bio-degradable and economical. You can use in ratio of 1:5 with water. On wet hands apply about 5-10 cc of lotion to achieve a rich lather and absolute cleaning in difficult areas such as nails, crevices around knuckles and other areas. You can use it in offices, hotels, restaurants and hospitals.

Specifications :

• Total Active Matter: 10+0.5
• PH: 7.0 – 7.5
• Viscosity at 25°C : 80-100cps
• Specific Gravity: 0.99-1.01
• Available in 5 Litre cans /25 and 50 kg Containers

Paraffin Paste for water base ink is one of our most trusted products. Based in Mumbai, Maharashtra, we are the leading exporters, manufacturers and suppliers of Paraffin Paste that are currently available in over 18 standard ink shades. Our paints have found wide acceptance in Water Base Printing Inks for Card Board printing etc. Our prolific staff is capable of mixing the paste to produce about hundreds of combinations. Every material is available in YELLOW, RED, BLUE, OLIVE GREEN, VIOLET, GREEN, TURQUOISE BLUE, ROYAL BLUE & BLACK PASTE each with a particle size of 0.5 MICRONS. These are easily pourable pigment preparations that are extremely concentrated and are in paste form. We offer both Organic & Inorganic Pigment Dispersion pastes that are easily soluble in water. You can mix with a binder in any ratio. You can avail the paraffin paste in drums of 25 / 50 kg's or as per your needs.

We are the based in Mumbai, Maharashtra and are the most celebrated exporter, supplier and manufacturer of Pigment Fine Pastes. Our pigment fine paste is rich in the solids and is pourable pigment dispersions. It has been designed to serve as coloration in different aqueous pastes. The pigment fine paste from our company has high quantity of dispersed pigments bereft binders or resins. The high pigment level assures a number of economical and technical advantages. The requisite amount of additions in the coating or the paint for achieving the standard colour is minimal. In order to achieve full colour strength one simply needs to fully disperse the fine paste by careful stirring. This means that there will be no excess cost on grinding.   

Used Info :

• Paratint Fine pastes are completely miscible with each other and can be mixed in various proportions to achieve numerous shades.
• Finally high pigment loading implies fewer containers, ease in handling and less storage area Offering
• The Paratint Fine paste is available in bulk packing of 10kg, 25kg and 50kgs. Application

Paratint Fine pastes are directly used for in-plant productions for paints :

• Latex Colors
• Paper coating
• Detergent Cake and Powder. Bath Soap
• Wax colors
• Textile Printing
• Water Base Ink
• Water based cosmetics products like Bindi's, etc.

Our company is the prime exporter, supplier and manufacturer of Machine Colorant. Based in Mumbai, Maharashtra the machine colorant that is attained from us can be as used in decorative applications. It is the ultimate solution to your customized colorant needs. You can customize the colorant to suit your machines as well as unique formulations. You can use it for both interior as well as exterior use. We even offer a wide range of colors to choose from. Our machine colorant is ideal for in-shop and depot for tinting and exhibits excellent color development in aqueous and solvent systems. It is free of binder and is compatible with latex emulsion, alkyd enamel and nitrocellulose lacquer. The colorant has a high color strength and a long in-can shelf life.   

 
Info :

• Perolite™ Colors A range of universal decorative colorants is suitable for latex paints, long oil alkyds, enamels and wood stains. The pigmentation used in Perolite colorants enables a wide color area to be reached while addressing important requirements such as light fastness, accuracy in pastels, opacity and cost effectiveness. The higher quality pigments for red and yellow provide better weather resistance for exterior applications. At the same time the Perolite™ color a range also includes economically priced interior quality yellow and red options developed for interior applications.
• In order to fulfill the highest expectations of point of sale tinting in terms of color precision and reproducibility, all Perolite™ colorants meet the strictest specifications. Color tone and strength are controlled volumetrically, ensuring both excellent rheological behavior and accurate in volumetric tinting equipment. All Perolite™ colorants are based on a well proven technology in which propylene glycol is used as a co-solvent
• The Perolite™ colorants are available in various different system configurations, starting from basic 14-16 colorant systems. These systems are extended with both additional inorganic colorants and/or transparent iron oxide colorants.

Directions :Mix colorants by hand stirring before pouring into tinting machine. Minimize air entrapment as this may affect volumetric accuracy of tinting machine. Dosage does not normally exceed 10% by volume of base paint.

Our company is the most celebrated exporter, supplier and manufacturer of Pigment Emulsions. Based in Mumbai, Maharashtra you can use our pigments for Textile Printing. It can be best printed in combination with binder SLN/SFN on cotton, viscose, Nylon fabrics polyester and their blends. In order to attain high degree of fastness properties on synthetic fabrics, we recommend the use of fixer. Our pigment emulsion is based on the oil in water based emulsion system. The key ingredients of the paste that you can avail from us are Acid Liberating agents as catalysts, Binder and Kerosene or mineral turpentine or synthetic thickeners.

Info :

• Preparation of the stock paste. Preparation of 10% binder stock reduction thickening
• 10 parts binder
• 5 parts cepol LV % thickening 2 parts urea depending on atmospheric conditions
• 6 parts water
• 1 part emulsifier
• 76 parts kerosene or mineral turpentine under high speed tinting

Preparation for Print Paste :

• 1-4 parts peron pigment emulsion
• 4-4 parts diammonium phosphate (1:3) solution
• 95-92 parts 10% binder reduction thickening.
• Addition of extra binder is recommended above 4% shade to meet the ratio of pigment emulsions to binder to 1:2.5.
• The fabric printed with Peron pigment emulsions/binder system is fixed by curing at 140c for 5min in hot air curing chamber.

We are the leading exporter, manufacturer and supplier of Coating Pigments. Based in Mumbai, Maharashtra our coating pigment is capable of delivering paper and board a smooth and hard surface. This ensures superior quality printing and makes it appealing. The pigment in light weight and provides the paper and board with a good whiteness, brightness and strength. These have been generated by calcium sulfate that has been crystallized or ground to achieve a desirable shape and size. You can tailor the pigment to optimum porosity that is needed for extremely light paper with marvelous printing properties. Particularly suited for bright grades of paper such as coated fine papers, LWC, MWC and MFC printing papers and other types of paperboards it has economical lightness.

Info:Paper Coating pigments have been developed, in close cooperation with paper industry partners. Our unique crystallization technology is suitable for both on- and off-site production. We are ready to help you explore the benefits our calcium sulfate coating applications can offer your specific process and development needs.

Economy

• Economical lightness : These ultralight pigments provide more paper and board for the same weight. Sustainability

We are counted among illustrious Manufacturers, Exporters & Suppliers of WUD-LAC Polyurethane Wood Finish based in Maharashtra, India. WUD-LAC, which we offer, is a one-pack economy Polyurethane (PU) which is easy-to-apply (brushable) and enhances the natural look of your interior wood. Buyers are free to place orders and can expect timely deliveries.

Details :

• Tough, smooth finish for different wood surfaces-old & new.
• Resistance to heat, water, stains and scratches.

 

Product Benefits

• Easy Application : WUD-LAC can be applied on wood quickly, simply by using a brush. It is great for touch-up jobs.
• Hardness : WUD-LAC Interior provides better hardness and protection to wood compared to the local French polish.

Direction of Use

• Pre - Polished Surfaces
  • Sand the surface along the grains clean surface free of dust & grease.
  • Apply a coat of WUD-LAC either with brush, muslin cloth or spray gun.

• Apply to dry for 6-8 hours and the sand with emery paper no. 320. Apply second coat of WUD-LAC.

Note : Stir the contents before use and strain through muslin cloth. Use Mineral Turpentine for diluting to required consistency.

PACKING: 200ml, 500ml & 1ltr.

Over the years, we have emerged as one-stop destination for acquiring Parasol Paint and Varnish Removers at leading market prices! We strive to deliver powerful and high performance paint and varnish remover that is precisely developed in line with stated quality norms. We are noted Manufacturer, Exporter & Supplier of Parasol Paint and Varnish Removers and assure time bound deliveries.

we are offering Parafix All Clean is a multipurpose detergent handy for a wide range of cleaning jobs.Directions for regular mopping use parafix all klean 1:140 in water (35ml in 5 liters). Dip a cloth in the solution and mop. periodical scrubbing use 1 part of parafix all klean in 10 parts of water. Apply on floor, scrub well and rinse with water. Furniture, glass and leather- use 20ml parafix all klean in 5 litre of water. Dip a cloth in solution and wipe in soiled surface. Adjust dilution according to the soil condition.can be used on parafix all klean can be used on floors, wooden surface, walls, glass, leather and other surfaces unharmed by water.

Specifications

• Total active germicide : 10+0.5ph : 7- .5
• Viscosity at 25°c : 70 – 80 cps
• Specific gravity : 0.99 – 1.01
• Available in 5 litre cans 25 and 50 ltres containers

 

Products Features

• Does not damage surface
• Safe to use
• Does not contain acid
• Bio– degradable
• Low foaming
• Ensure complete rinsing
• Wide usage
• Dilutes for economical use yet retains efficiency

Over the years, we have emerged as one-stop destination for acquiring Parasol Paint and Varnish Removers at leading market prices! We strive to deliver powerful and high performance paint and varnish remover that is precisely developed in line with stated quality norms. We are noted Manufacturer, Exporter & Supplier of Parasol Paint and Varnish Removers and assure time bound deliveries.

More about Parasol Paint and Varnish Removers

• It can effectively use to strip paint and varnish from wooden surface like old furniture & from metal surface like Automobile bodies e.g. car, bus, truck, auto, tractor, etc. & home appliances like refrigerators, cupboards & fans etc. & employed in wide array of industrial and household applications such as paint shops, workshops, garages, railways, defense, shipping industries & at home.
• These unique product offer impressive performance on almost all types of paint system like two pack wood finishes, air drying & baking industrial finishes like melaminised, alkyds, polyamides, polyurethane, polyester & powder coating.
• The main characteristic properties of PARASOL is it can dilute with NC thinner with almost no loss in performance characteristic when apply on metals. This is a significant benefit to user as cost & labor saving can be achieved while maintaining or even improving the stripping performance.

 

PACKING : 500g, 1Kg & bulk.

Our Wood Coating is one of the best seller products. Based in Mumbai, Maharashtra we offer a huge variety of 15 natural stains that have been especially specially formulated with the superior quality solvent based fast drying stains that aid in accentuating the natural beauty of the wood grains. Wipe and fill the surface and further smooth sand the surface with a 180 grit paper. Next, apply stain with muslin cloths in addition to the grains. Further let the surface dry for about 30 minutes before the application of the finish coat. You can mix the stains with the NC/ melamine finishes approximately 20% by volume, if required. Never mix the stains woody or PU finishes. We are the leading exporter, supplier and manufacturer of Wood Coatings.