Our Products
Meteorological & Weather Instruments
1 Products availableAIR Monitoring Instruments
1 Products availableGas Analyzers
1 Products availableComputer Monitor
1 Products availableMeasuring Instruments & Equipment
1 Products availableOur Complete range of products are Fix Gas Detector- FGD-X, Portable Gas Detector-X (PGD-X) and Portable Multi-Gas Detector (PGD-Max).
Introduction:
The FGD-X is a Microcontroller-based Gas leak detector for detecting Flammable Gas Hazards, Toxic Gas Hazards and Asphyxiant (Oxygen Deficiency) Hazards. It is a Single Point Wall Mounted Instrument work on 220 VAC main supply and has a sensor fitted at the end of a cable. They use an IP 55 enclosure for the electronics as standard.
Applications:They are used for continuous surveillance single point monitoring the Volatile organic Compounds in workplaces or enclosed spaces in hazardous, explosive or toxic gas conditions & environments. The parameter for measuring would be VOC with Range of 0- 100ppm and Resolution of 0.1 ppm/0.1 ppb.
Features:
Two Alarms, audible and visual (separate LEDs + alerts on display), along with inhibit, acknowledge and reset options.
Alarms are settable as manual or auto reset type (Latching or non-latching)
Two potential free relay contacts for external use.
Separate Confidence flash LED to know that equipment is working properly.
4 switch operation using Magnetic Pen (contact-less operation).
Data Outputs (Optional): Modbus RS485, 4-20 mA.
Application:
Environmental monitoring in the work place atmosphere, Levels of concentration measurement of gases for Occupational Exposure Limit of health & safety of personnel. Oxygen deficiency of breathing air in closed vessels & confined places personal safety. An instrument is usually required to signal alarms at two levels - the Short Term (STEL) and Long Term (TWA) Exposure Limits. These limits are the responsibility of different bodies, so the precise level and definition of each varies
Features:
Additional Information:
Delivery Time : 4 weeks
Microcontroller-based Gas leak detector for detecting Flammable Gas Hazards, Toxic Gas Hazards and Asphyxiant (Oxygen Deficiency) Hazards.
Gas Leak Protection From 4 Main Types of Hazards:
1. Flammable Gas Hazards (Risk of Fire & Explosion)
o e.g. Methane, Butane, Propane, Hydrogen (LEL), etc. 45+ types available
2. Toxic Gas Hazards (Risk of Poisoning)
o e.g. Carbon Monoxide, Chlorine, Phosgene, etc. 25+ types available
3. Asphyxiant (Risk of Suffocation)
o e.g. Oxygen Deficiency
4. Volatile Organic Compounds (VOCs)
o e.g. Formaldehyde, Benzene, etc. 25+ types available
Application:
Environmental monitoring in the workplace atmosphere, Levels of concentration measurement of gases for Occupational Exposure Limit of health & safety of personnel. Oxygen deficiency of breathing air in closed vessels & confined places personal safety. It signals alarms at two levels - the Short Term (STEL) and Long Term (TWA) Exposure Limits. These limits are the responsibility of different bodies, so the precise level and definition of each varies.
Features:
Zero & Cal are software programmable for ease of operation.
Two Alarm levels, each with a flashing LED, pulsating beeps and vibration.
Alarm LED steady if silenced and off when below set-point limits.
Automatic shutdown if in absolute Low battery condition.
Voltage power status viewable with early Low Batt warning.
INST (Instantaneous), STEL, and TWA Readings are stored, and MIN, MAX, AVG, and PEAK values are viewable.
LED indication for Menu operation, LCD display & confidence beep.
All parameters are set using keys on the front face.
48+ Different gases can be detected.
(Optional) Internal pump for sampling of gas from confined spaces also available
Shockproof Cover to prevent damage to unit due to accidental drop.