Other Products / Services #32359

The technology used by Press Room is shifting of the coil below a fixed die. It is characterised by a good production capacity, high flexibility and low tooling costs. Line consists of decoiler with coil car, straightener, nc zig zag feeder, press, shear & stacker. Entire working sequence is directly managed from Control Panel which allows operator to have a single control of all the line functions.The strip from the coil can have two movements, both NC servo controlled: the feeding movement (called longitudinal shifting) & the lateral movement (called transversal shifting). Thanks to these movements, each blanking is followed by the lateral movement of the coil of a programmed step and by the blanking of the next disk, up to the realisation of a row of blanked disks along the coil width. At the completion of the row, the strip is fed so that the blanking of a new row can start.

* Three Four Self Centering Coil-location jaws. With mechanical gear reducer for models above 2.5 Tonne, The Spindle & Coil holding heads housed in mechanical & precised machined housing & rotates on dust proofed sealed bearing element, All motorised decoilers are chain driven soft start & stop through mechanical torque limiter & friction drag brake.

The units are fabricated from steel and the straightener rolls are properly fixed and aligned in machine and ground housing.OneTwo sets of drive pinch rolls are provided as required. All the feed Rolls & Bottom Rolls are driven, while Top Rolls have individual adjustments.All the Rolls are made of Special Alloy Steel Material Hardened, Ground, Chrome plated & are housed into precision needle

We are offering twin levelling for component levelling. round parts are always levelled in two directions. The most economical solution for series production such as clutch disks in a twin levelling machine. This double levelling line consists of 2 precision part levelling units connected by a turntable. Between the two levelling sequences the turnable turns the parts by 90.

We are offering scrap coiler. Features :- rigid fabricated structure.three four self centering coil location jaws with mechanical gear reducer for model above 2.5 tonne.the spindle & coil holding heads housed in mechanical & prcised machined housing & rotates on dust proofed sealed bearing element.all motorized coilers are chain driven soft start & stop through mechanical torque limitor & friction drag brake.drive system : a.c. Fixed speed a.c. Variable speed (optional).control panel with suitable loop control system to maintain loop of coil for the machine via antenna type loop sensors limit arm through limit switches.

We are offering pull through wire straightener.Standard features 5 7 9 11 13 rollers in two-axis depending on accuracy requirement.non-driven.for wire size of 0.1 to 4.0 mm

We are offering coil straightener.Features* the units are fabricated from steel and the straightener rolls are properly fixed and aligned in machine and ground housing.* onetwo sets of drive pinch rolls are provided as required.* all the feed rolls & bottom rolls are driven, while top rolls have individual adjustments.* all the rolls are made of special alloy steel material hardened, ground, chrome plated & are housed into precision needle bearing sealed at both ends.* upper straightening rolls are independently adjustable and once set, gang adjustment can be done for repeat operations.* gang adjustment of top roller blank for straightener with more number of rolls & for straightener of lesser thickness range.* roll setting scale on side platesdial gauges in some models.* entry guides.* exit cascade rolls.* control panel with suitable loop control system to maintainloop of coil for the machine via antenna type loop controls limit arm through limit switches.* fixed line speed variable line speed above 15 mtr. min.