Testing Equipment #4197371

The drop test is performed to determine the ability of pre board containers to withstand vertical impact in free drops. The test may be performed as a single test or multiple test to determine and analyse the conditions that occur on a package during handling & transit. It serves as a effective equipment for package design and performance analysis before production and use.

Reason for testing:

It is because that the eect of shock in transit having on products is to such an extent that they deteriorate progressively and it often leads products unusable.Needless to say, ordinary products are mostly put in far severer conditions in the distribution routes than

in their working conditions.

The compressive index of a material the failure load per width/basis weight) increase with sheet density in much the same way as the tensile index.

Hence fibre characteristics that contribute to density and flexural modulus of the sheet and the resilience of the fibres themselves are likely contributing factors.

Fully microprocessor controlled menu driven software allows easy selection and setting of test parameters with precise pneumatic clamping hold the specimen accurately and sample test to minimize the human error during test to provide rapid and efficient determination of compression strength of fluting media or test liner suitable for paper and paperboard GSM range 100-400 with in-built printer.

This instrument is used to measure the Degree of curl when the paper sample exposed to water.

This method applies the principle of wetting one side of the paper and determining the maximum curvature developed or the time required to reach maximum curvature .

The maximum Curvature is an indication of relative tendency of certain paper, especially, to curl under normal condition of usage. The time required to reach max. Curvature is measure of relative degree of sizing such as secured with rosin (3)

To measure rub proofness of printed paper, carton package & board by applied contact pressure.

Two contact disc rotate in contact at a same angular speed, giving constant relative velocity between all points of the disc.

With interchangeable dead weight and Electrically driven system.

The Roughness of paper or similar material is defined as the volume of air that is forced by a specified pressure difference escapes in unit time by passing between the surface of the specimen and flat metal ring resting on a specimen. The values indicates the surface smoothness of graded paper suitable for good print quality.

A sample is placed on a perfect plane glass plate, measuring head on the test piece and a controlled and low air pressure pass through a flat metal ring and the specimen.

The pressure difference read off/on selected rota meter tube.

Measuring range: 5-150 ml/min. 50-500 ml/min., 300-3000 ml/min.

Designed for determining the Internal Bonding Strength of Paper, Paperboard and Laminates, by measuring the average energy, in thousands of foot pound required to delaminate the specimen in two piles, as described reference standard TAPPI T-569.

Dual capacity pendulum of 0.25 FT/LB and 0.1-0.5 FT/LB. Readings directly on calibrated scale. The five number specimen preparation unit, which will allow for variations of specimen thicknesses, with different clamping pressures on the specimen from 50 to 200 PSI.

Standard calibration sliding weight with sample holder.

Double side adhesive tape width 1.

This instrument is used fordetermining the penetration time of oil and other liquids through paper and other similar materials used for lamination purpose.

Electronic self starting timer for time measurement of Penetration time in seconds. Measuring Range: Upto 99, 999 seconds.

The Universals wet strength tester is used for measuring the initial wet strength & elongation. This instrument is used for measuring the maximum tensile force per unit width that a wet test piece, made from a pulp under specified conditions, will stand before breaking in a tensile test. It measures the initial wet web strength and elongation of newsprint strip or pulp.

Digital display with automatic return after rupture.

DIGITAL MODEL: This instrument is used for testing the core collapsing strength and has adjustable testing area to accommodate specimen sizes and shapes. Motorized operated piston to apply uniform pressure to crush the test sample. The maximum peak crush value recorded on digital load indicator.

Puncture Resistance: The puncture resistance of paperboard is measured as the energy required to force a puncture head of specified design through a test piece of the board under specified testing condition. A test piece is clamped between two horizontal plates in each of which is a triangular hole.

A triangular pyramid puncture head, attached to a swinging pendulum, punctures the test piece and the energy required to force it through the test piece is measured.

Measuring range 0-5, 0-10, 0-20 & 0-36 Nm OR

Measuring range 0-58.5, 0-200, 0-400, 0-800, 0-1600 kgf.

Designed to determine the wear and durability of paper and board, ceramics, plastic, textile, rubber, flooring, and painted lacquered and electroplated surfaces. Electrically driven with predetermined digital cycle counter selections between 1 to 99, 999 with vacuum dust extractors.

(i) With single Abraser unit

(ii) With Double Independent Abraser units.

To determine the compression resistance of corrugated & non-corrugated boxes. The instrument provide the Digital Display of Load and deformation. Complete with memory for retaining peak value, automatic or normal zero setting, overload and over travel protection facilities. Platten Size 600 x 600 mm / 1000 x 1000 mm Load capacity 0-1000, 0-2000 Kgs.

Option: Special dedicated window based software for interfacing main unit with computer and printer. Computer based control, data collection and data analysis for graphical result of load and deformation arithmetic mean, max, minimum, standard coefficient of variation (CV), maximum / minimum of series, peak value, selection of unit either Kgf. Or kN and graphical presentation of test series and real time graph.

This instrument is used for determination of freeness of wood fibre ground wood and mechanical pulp. It measures the Canadian Freeness number which is a measurement of the drainage capacity of different pulp types.