Our Products
Grinding & Milling Tools & Machinery
1 Products availableExtruder Machine
1 Products availableAutomobile Repair Tools & Equipment
1 Products availableOutdoor Plants
1 Products availableTesting Equipment
1 Products availableLeading Manufacturer, Supplier & Retailer of Three Roll Calenders, kneader machines, rubber hydraulic presses and Rubber machinery.
The basic design and construction of the mills has been subjected to continuous improvements which have permitted them to keep pace with the day to day needs of the industry.
Available in sizes varying from 6"x16" to 26"x84" for compounding, warming, sheeting of various grades and types of rubber and other material.
In the category of Mill also available in different sizes are Refiners, Crackers, Grinders, Rubber Breakers Mills and Asbestos Shelters.
Salient features include chilled cast iron rolls, frames, caps, journal boxes in high grade casting, gear of cast iron or casting and MS steel fabricated as per duly requirements special alloy leaded bronze bushing suitable to take heavy separating forces and to give longer wear life, gravity/forced or flood lubricating systems rolls suitable for steam heating/water cooling, positive pull back fail safe system for emergency stop. Special accessories include strip cutters, stock dividing guides, stock blanders etc
Size of Roll | Capacity Kgs. | R.P.M.of Motor | Friction Ratio | Electric |
6” x 13” 8” x 18” 10” x 24” 12” x 30” 14” x 36” 16” x 42” 18” x 48” 22” x 60” 24” x 78” 26” x 84” |
3 / 6 7 / 10 15 / 20 20 / 30 30 / 45 50 / 60 75 / 90 90 / 110 130 / 150 160 / 180 |
29 23 21 21 19 17 15 12 12 10 |
1 : 1 . 15 1 : 1 . 15 1 : 1 . 18 1 : 1 . 18 1 : 1 . 18 1 : 1 . 18 1 : 1 . 18 1 : 1 . 18 1 : 1 . 18 1 : 1 . 18 |
7.5 10 20 30 40 60 75 120 175 225 |
Hot feed screw type extruders are heavy-duty machines built to suit individual needs. They are made in many different type and sizes to meet the production requirements for straining, extruding, tubing, slab production or contoured shapes. The extruders size depends upon the hourly output required and method of feeding and with a complete line of equipment is available to meet with all customers need. The Cold feed Extruders have been developed for processing cold rubber compound. Since these machines, in addition to extruding profiles also plasticize rubber, they differ from hot feed extruders. They have longer screws, heavier gear boxes and higher drive power. According to present stage of development cold feed extruders can be used for extruding almost all rubber compounds which are processable on hot feed extruders. Feeding is normally in the form of strips or pellets. Machines with longer screw diameters are often fed directly with wig-wag stored slabs. |
Worm Dial | L/D Ratio | Worm | Capacity | Electric |
Speed R.P.M. | K.G./ H.R. App. | Motor H.P. | ||
1” 2” 3” 4” 4.5” 6” 8” |
1 : 5 1 : 5 1 : 5 1 : 5 1 : 5 1 : 5 1 : 5 |
52 52 47 45 45 35 25 |
5 20 30 140 170 250 300 |
2 5 7.5 15 20 30 40 |
Specific Pressure required per cm (or per inch) on product or platen to decide the tonnage of the press Heating Media (Steam or electrical) curing temperature, curing time sequence to decide the method of heating, cycle of operation of the press. Therefore, an expert advice for selection of most appropriate press is utmost important, which you get free from Premier Engineers. that make Premier Hydraulic Presses the 'Zero Error' Presses. Hydraulic Pressesare the machines in which rubber compound and other materials are shaped as finished products. As are the machines, so are the finished products. Ranging from 50 to 2500 Tons, theses Presses are manufactured with operation safety and optimum machine production in mind. Controls and hydraulic system are perfectly matched to ensure complete customer satisfaction.The frame is fabricated from tested-quality steel profiles and plates of suitable thickness to withstand load during operation. Maximum frame rigidity is achieved through computer aided frame design for longer life of press. Precise machining of parts and their careful assembly ensures accuracies like parallelism between platen & bed and right angularity between the bed and the moving platen. The low noise powerful hydraulic unit is designed as per latest standards and assembled with best quality components. All valves are manifold mounted for easy and quick maintenance. A pressure relief valve protects against overloading of the press. During curing period, the motor stops which reduces electricity consumption. These presses provide fast approach, slow pressing and fast return speeds. The change in speed can be manually preset with the help of limit switches. These presses give more production because numbers of breathing, breathing duration, curing time, temperature of platens etc can be controlled. Our presses are rightly called life line machines for best finished products. Compromising with low cost and old fashioned machines for production will be the last folly for doom of any kind of industry. Though a few standard sizes are always in production and readily available, we custom engineer presses at short notice to fit the application needs of clients. | |
Specification of Rubber Extruder Machines ( Channel Type or Gate Type ) for manufacturing of Rubber Sheets & Moulded Parts. | |||||
Size | Ram Size | Day Light | Lift Stroke | H.P. | Capacity(Tons.) |
12" X 12" 14" X 20" 16" X 16" 18" X 18" 20" X 20" 24" X 24" 24" X 28" 30" X 30" 32" X 32" 36" X 36" 48" X 48" |
6 7 8 9 10 12 16 16 18 20 24 |
5 5 5 5 5 5 5 5 5 5 5 |
12" 12" 12" 12" 12" 12" 12" 12" 12" 12" 12" |
2 3 3 3 3 3 5 5 7.5 10 15 |
50 60 75 100 150 200 300 300 375 450 600 |
An Oscillating Disc Rheometer is a simple, reliable and efficient testing equipment.
Rheometer is a only equipment which helps the compounder to choose the right material and it appropriate does to meet the end requirements of the product.
Rheometer exhibits the curing characteristics of the rubber compound.
Rheometer monitors the processing characteristics as well as the physical properties of the material.
Rheometer gives the finger print of the compound's vulcanization and processing character.
Rheometer is useful to carry out the study of any rubber or chemical changes in the existing compounds.