Precision Tools

Satpur, Nashik, Maharashtra

We are offering refrigerator grade shrinkin'sleeves" widely accepted in the "fridge manufacturing provide good heat, electrical insulation. The biaxial forces, released during shrinking provide a long lasting, infallible mechanical bondage.

Shrinkin'Sleeves" widely accepted in the "Fridge manufacturing provide good heat, electrical insulation. The biaxial forces, released during shrinking provide a long lasting, infallible mechanical bondage. Physical & Electrical Properties

• Shrink Temperature : 120^o Centigrade
• Corrosive Effect Non Corrosive : Resistant to Acids, Alkalis & Oils
• Fire Retardation : Self Extinguishing, Non Flammable
• Std. Color : Red, Grey, Blue Clear & Transparent

Dry cell battery grade - db 500 "shrinkin'sleeves" are used in dry cell batteries for individual or batch packing and also to cover internal core to provide insulation and to protect the equipment from corrosion by leakage .

"Shrinkin'Sleeves" are used in dry cell batteries for individual or batch packing and also to cover internal core to provide insulation and to protect the equipment from corrosion by leakage.

Container grade - ct 400 "shrinkin'sleeves" used over glass/aluminum containers make them shatter resistant, and provide a decorative wrapping which prevents pilferage during handling & tampering by spurious suppliers.

capacitor grade - cp 200 "shrinkin'sleeves" provide good insulation assuring quality and offer a high degree of impact resistance protecting the capacitor from breakage during rough uses.

physical & electrical properties :

tensile strength: 300 kg / sq. Cm.

tear strength: 75 kg / cm.

water absorption: less than 0.5 %

dielectric strength: 6 kv at 0.10 mm thickness

heat resistance: 105o c for 1000 hrs continuous

shrink ratio: md 10 %; td 40 %.

fire retardation: self extinguishing, non flammable

type: creased

type sizes available: for dia. From 4.00 to 150.00 mm

standard color: blue gray, black, violet, and green.

"shrinkin'sleeves" are to be stored in a cool place away from direct sunlight, high temperature and humidity.

"Shrinkin'Sleeves" provide good insulation assuring quality and offer a high degree of impact resistance protecting the capacitor from breakage during rough uses. Physical & Electrical Properties

• Tensile Strength : 300 kg / Sq. Cm.
• Tear Strength : 75 kg / Cm.
• Water Absorption : Less than 0.70 %
• Dielectric Strength : 6 KV at 0.10 MM thickness
• Heat Resistance : 105o C for 1000 Hrs continuous
• Shrink Ratio : MD 10 %; TD 40 %.
• Fire Retardation : Self extinguishing, Non flammable
• Type : Creased Type
• Sizes Available : For dia. from 4.00 to 150.00 mm
• Standard Color : Blue Gray, Black, Violet, and Green

We are offering cable lug grade shrinkin'sleeves" insulate lugged cable ends with scratch proof, hard, noncorrosive cover so as to avoid flashingsparking due to accidental contacts, while mechanical bonding provided at the lug & conductor sheath juncture by "shrinkin'sleeves" reduce the stress at the terminal.

We are offering cap seal grade "shrinkin'sleeves" are extensively used for sealing of containers making the container pilfer proof, protecting the aroma & test of the product, prevents evaporation to retain the moisture content.

We are offering container grade shrinkin'sleeves" used over glassaluminum containers make them shatter resistant, and provide a decorative wrapping which prevents pilferage during handling & tampering by spurious suppliers.

"Shrinkin'Sleeves" are extensively used for sealing of containers making the container pilfer proof, protecting the aroma & test of the product, prevents evaporation to retain the moisture content.

Cap seal grade - cs 300 "shrinkin'sleeves" are extensively used for sealing of containers making the container pilfer proof, protecting the aroma & test of the product, prevents evaporation to retain the moisture content.

We are offering pvc heat shrink sleeves"shrinkin'sleeves" used to insulate busbars and conductors provide excellent insulation with a high dielectric strength & a good retention of dielectric strength under wet conditions.

We are a Famous Manufacturer and Supplier of Insulation Sleeve / Heat Shrink Sleeve required for Terminal Ends from India. We Offer Wide Range of  Insulation Sleeve / Heat Shrink Sleeve  and are used Internationally also Well-known for Their Long-lasting nature.
Lugged Cable Ends are insulated to avoid Flashing / Sparking / Accidental Contacts. This is also necessary to Avoid Corrosion of Lugs and Cable Conductor Material. The Mechanical Bonding provided By �Shrinkin'Sleeves" between Lug and Conductor sheath reduces the stress at the Terminal. Insulation is Traditionally Done By the Following Ways, Taping Painting / Spraying "Powder Coating" Epoxy Potting "Bare Bus Bar" Sleevings A) Imported B) "shrinkin'sleeves".

• Taping :  in this Process Ordinary Electrical Insulation Tape is Used Which is Wrapped Around the Bus Bar from End to End. Desired Insulation is Achieved By No. of Layers Laid Over the Conductor. the Reliability of this Method is Very Poor.
• Painting / Spraying :  Certain Paints are Available to Attain Electrical Insulation Up to a Low Value.
• Powder Coating :  Uniformity Achieved is Uniform with Insulation Limitation Being the Main Constraint.
• Epoxy Potting :  By this Method Insulation of High Value is Achieved in the Best Possible Way But It is Tedious, Costly and Time Consuming.
• Bare Bus Bar :  Air Being Natural Insulator, Insulation Up to a Certain Low Value is Achieved By Adjusting the Distance Between Two Conductors. However Space Availability is the Constraint.
• Sleeving :  By This, High Insulation Values are Achieved. Uniformity, Consistency & Reliability Levels Attained are of Very High Standards.
• Imported Sleeves :  These are Rubberized Polymer Sleeves Having Excellent Insulation Properties. Availability and Very High Costs are the Major Factors Restricting Their Extensive Usage.
• Shrinkin Sleeves :  Sleevings with Improved Electrical Insulation Properties Higher Insulation Values are Achieved By Encapsulating the Conductor in shrinkin'sleeves-Bb 100 Grade. Versatility, Reliability & Operational Simplicity, in Addition to Cost Effectiveness are the Major Favorable Factors.

The Manufacturing Process Involves Orientation of Molecular Memory of the Sleeve Introducing a Built-in Shrinkage Which is Subsequently Released At Elevated Temperature Activating the Molecular Memory of Pvc Resulting in Instantaneous Release of the Shrink Strains. the Biaxial Strains Thus Released Result in Contraction of the Sleeve, Lengthwise and Width Wise. the Shrinkage Force Reaches Its Maximum During Cooling and is Maintained for a Longer Period Thereafter.
Shrinkin Sleeves  is Available in Creased Type Rolls with Roll Length Ranging from 50 Mtrs to 200 Mtrs. Wound Over Hard Card Board Core, Covered in Plyethylene Bag and Packed in Card Board Containers.
Activation of Molecular Memory of the shrinkin'sleeves At Elevated Temperature Demands the Sleeves to Be Stored in Cool Place Away from Direct Sunlight, High Temperature and Humidity with Storage Tempt Not Exceeding 25oc. the Shelf Life of "shrinkin'sleeves" Prior to Shrinking, is 6 Months.

Cable lug grade - cl 700 "shrinkin'sleeves" insulate lugged cable ends with scratch proof, hard, noncorrosive cover so as to avoid flashing/sparking due to accidental contacts, while mechanical bonding provided at the lug & conductor sheath juncture by "shrinkin'sleeves" reduce the stress at the terminal.

"Shrinkin'Sleeves" insulate lugged cable ends with scratch proof, hard, noncorrosive cover so as to avoid flashing/sparking due to accidental contacts, while mechanical bonding provided at the Lug & Conductor Sheath juncture by "Shrinkin'Sleeves" reduce the stress at the terminal.

We are backed by a team of quality controllers who make sure that the offered lot is in complete conformity with the quality standards. Purchasers can rely on us to make on time distribution of orders, as we have cooperated with established transportation facility providers.