Precision Storage Vessels Pvt Ltd

Vellimalai, Kanyakumari, Tamil Nadu

Features :

• Guaranteed oxygen removal to 0.005 cc/litre (7PPB)
• Guaranteed to eliminate titratable free carbon dioxide to O
• Guaranteed to heat water to the corresponding temperature of the saturated steam contained within the vessel
• Turndown 20-1
• Capacities from 5000 # hr to 1, 000, 000 # hr
• 10 minutes of storage capacity minimum
• #430 stainless steel Riveted Trays.
• #304 Stainless Steel internal vent condenser (direct contact on units > 30, 000 PPH)
• #316 Stainless Steel spray valves
• #304 Stainless Steel tray enclosure
• Our exclusive gliding tray door system for ease of tray inspection and removal
• All de-aerators designed for extract job conditions, no over or under sizing
• Completely packaged and ready for installation
• All vessels designed, built and stamped in accordance with the ASME code for 50 psig

Steam boilers must be blow down at regular intervals to resolve some of the suspended and dissolved solids formed during the course production of steam. These undissolved solids in the boiler water can give rise to foaming and scaling of the boiler tubes and shell. Selection of a blowdown vessel depends on the flow rate and the proportion of flash steam released. Blowdown vessels are manufactured in Carbon steel plates.

StandardsASME Code construction : All tanks are constructed in accordance with ASME code section IV and labelled for 125 PSI (8.6 BAR) as Standard.
Precision also design Buffer Vessel as per British Standard BS 853:1996, BS 5500:1997 or in accordance with Art 3.3 of the European Directive EEC/97/23 for pressure equipment.

Vessel Lining

Precision Coat - Precision coat is a polymerized coating which is applied to all internal surfaces of the tank. Tank surfaces are first sandblasted and cleaned to a white metal finish and then precision coat is applied uniformly. The tanks are then force cured at 95°C to form a glossy lining unaffected by thermal shock from -6°C to 80°C. Precision coat is approved by US department of agriculture and with NSF/61 certification for drinking water.

Glass Lining - Precision’s glass lining is a specially formulated vitreous porcelain enamel, which is applied to all interior surfaces of the tank. Tank surfaces are first sandblasted to a white metal finish and then Porcelain enamel is applied uniformly. The tank is then fired to 900°C in a furnace to achieve 100% molecular fusing of the glass to the interior steel surface, which forms a best possible glass coating for potable water in a strong vessel.

• Connection : Connection can be of screwed / flanged.
• Supports : Supports can be of L type, Ring type or Tubular.
• Painting : All Buffer vessels will be Externally Sandblasted to SA 2.5 and then coated with two coats red oxide primer.
• Working Pressure : Buffer Vessels are manufactured to 8.6 bar working pressure as standard (for other pressure please consult factory).
• Insulation : 50mm thick fiberglass wool encased in GI sheets and painted in Blue color.