precision bearings pvt ltd

East Pondy Road, villupuram, Tamil Nadu

Suitable forConstraint Space between housing and shaftCarry high radial loadLow and Medium speed Drawn Cup Needle Roller Bearing Caged Type - HK SCE SCH, BK BCE BCH, HK.RS, HK.2RS, BK.RS Needle Roller Bearings With Ribs-NK, NKS, RNA49, RNA48, NKI, NKIS, NA49, NA48, RNA69, NA69, RNA49.RS, RNA49.2RS, NA49.RS, NA49.2RSWithout Ribs-RNAO, NAOInner Ring-IR, LRFull Complement -RNAV, NAVAligning-RPNA, PNA

Clutch Release Bearings, Needle Roller Bearings, King Pin Bearings, DAC-Wheel Bearings and Gear Box Bearings are the main parts of automobile sector.

ZNL Offerings: 511XX, 512XX, 513XX DLJT, DMJT, (Inch & mm) Also available in Steel and Brass cage.

Suitable forCarry heavy radial load at high-speed applicationCompact spaceCarry axial displacementNon-bearing location installation Types of Cylindrical Roller Bearings: NU Design - Outer ring has two integral flanges, while inner ring had no flange.N Design - Inner ring has two integral flanges while outer ring has no flange.NJ Design - Outer ring has two integral flanges and inner ring has one integral flange.NUP Design - Outer ring has two integral flanges and inner ring had one integral flange & loose flange ring for both side axial locations

Znl offerings full compliment cylindrical roller bearing with snap ring groovessl 182xxx sl 183xxx sl 192xxx sealed double row full compliment cylindrical roller bearingsl 0450xx.

Suitable for High stiffness applicationCarrying combined loadAccommodating pure axial load or pure radial loadImpact load carrying capacity Types of Taper Roller bearings: Single row tapper roller bearings (also with seal on one side)Paired single row tapper roller bearingsDouble row tapper roller bearingsFour row tapper roller bearings

This bearing contains solid outer ring, split inner ring and ball and cage assembly. Two-piece inner rings allow large complement of ball to accommodate. These bearings are not suitable for miss alignment in housing or shaft deflection.Also these bearings are not sealed.

Suitable for In spherical roller thrust bearings the load is transmitted from one raceway to other at an angle to the bearing axis. The bearings are therefore suitable for the accommodation of radial loads. Another important characteristic of spherical roller thrust bearings is their self-aligning capability. This makes the bearings insensitive to shaft deflection and misalignment of the shaft relative to the housing.

ZNL Offerings: Single row deep groove ball bearings: 6800, 6900, 16000, 6000, 6200, 6300, 6400, 62000, 62300, 63000, 61800, 61900, 6200, 6300 - Also in EMQ [Electric Motor Quality]Double row deep groove ball bearings: 4200, 4300 with Z, 2Z shield and with Rubber seal RS, 2RS snap ring groove and snap ringFor radial clearance C2, CN, C3, C4, C5As per ISO grade P0 ABEC1 And as per ISO Grade P6A BEC3Cage type riveted of steel and brass steel, machined brass cage, polyimide.Dimension as per ISO standard, DIN standard and ISI standard.RLS, RMS, XLJ Available

ZNL Offerings: 202XX, 203XX, 213XX, 222XX, 223XX, 230XX, 231XX, 232XX240XX and 241XX Available in cylindrical and taper boreAvailable in steel and brass cage

Suitable for: Low or medium speed applicationCarry radial load, but not suitable for axial loads.Accommodating misalignments

ZNL Offerings: Single row angular contact ball bearing:7000, 7200, 7300, 7400(Available in Steel, Brass & Polyamide Cages) Double row angular contact ball bearing3200, 3300, 5200, 5300

These bearings are combination of radial ball bearing, seal and housing of high-grade cast iron which conies in various shapes. The OD of the bearing and the internal surface of housing are spherical, because of this the unit is self-aligning. The radial load carrying capacity of this bearing is higher than that of the corresponding self-aligning ball bearing used for standard plummer blocks. Any misalignment of axis that arises from poor workmanship on the shaft or error in fitting will be properly adjusted.

We have ability and flexibility of designing and manufacturing customized bearings as per clientapplication requirement. Some of the bearings offered are Air Craft BearingsSlewing Ring BearingCrossed Taper roller bearingTaper Roller Thrust bearingNeedle Roller Thrust BearingCam FollowerLarge Deep Grove Ball Bearing