Precision Bearings Pvt Ltd

Changodar, Ahmedabad, Gujarat

we are leading supplier of huge range of needle roller bearing.

suitable forconstraint space between housing and shaftcarry high radial loadlow and medium speed

drawn cup needle roller bearing

• caged type - hk sce sch, bk bce bch, hk.rs, hk.2rs, bk.rs

needle roller bearings

• with ribs-nk, nks, rna49, rna48, nki, nkis, na49, na48, rna69, na69, rna49.rs, rna49.2rs, na49.rs, na49.2rs
• without ribs-rnao, nao
• inner ring-ir, lr
• full complement -rnav, nav
• aligning-rpna, pna

axial bearing

• axial needle roller and cage assembly-axk, axw
• axial cylindrical roller and cage assembly-k811, k812, k893, k874, k894

radial needle and cage assmbliesk/ks, kk/kks, kzk, kbk, knl

yoke type track roller

• without axil guidance-rsto, rsto.x, sto, sto.x, rna22.2rs, rna22.2rsx, na22.2rs, na22.2rsx

• with axil guidance-natr, natv, nutr, nutr.x

stud type track roller

• with axial guidance-kr, kre, kr.pp, kre.pp, krv, krve, krv.pp, krve.pp, nukr, nukre

axial bearing washers

• shaft locating washers-as, ws
• housing locating washers-gs 811
• bearing washers-ls
• center washers-zs

.

Clutch Release Bearings, Needle Roller Bearings, King Pin Bearings, DAC-Wheel Bearings and Gear Box Bearings are the main parts of automobile sector.

DAC-Wheel Bearings RangeDAC 25520037 to DAC 5090034

Clutch Bearings RangeT. 63 to T. 811T. 1260 to T. 7519CB 3557 - 13 to CB 31870-355

They need less axial space than double Range row angular contact bearings. The contact angle is 35 degree & two parts l/R are easy to assemble & provide a high load carrying capacity.

ZNL Offerings:

• 511XX, 512XX, 513XX

• DLJT, DMJT, (Inch & mm)

Also available in Steel and Brass cage.

Outer ring has two integral flanges, while inner ring had no flange.Inner ring has two integral flanges while outer ring has no flange.Outer ring has two integral flanges and inner ring has one integral flange.

Suitable forCarry heavy radial load at high-speed applicationCompact spaceCarry axial displacementNon-bearing location installation

Types of Cylindrical Roller Bearings:

• NU Design - Outer ring has two integral flanges, while inner ring had no flange.
• N Design - Inner ring has two integral flanges while outer ring has no flange.
• NJ Design - Outer ring has two integral flanges and inner ring has one integral flange.
• NUP Design - Outer ring has two integral flanges and inner ring had one integral flange & loose flange ring for both side axial locations

ZNL Offering: N2XX, NF2XX, NJ2XX, NJ22XX, NU2XX, NU10XX, NUP2XX, NUP22XX, NU22XXN3XX, NF3XX, NJ3XX, NJ23XX, NU3XX, NUP3XX, NUP23XXN4XX, NF4XX, NJ4XX, NU4XX, NU23XX, NUP4XX

INCH SERIES:CRL, CRM, CFL, CFMAvailable in steel, brass, and polyamide cages

Suitable for

Heavy radial load carrying capacityUni-directional and bi-directional axial load carrying capacity

ZNL Offerings

Full compliment cylindrical roller bearing with snap ring groovesSL 182XXX SL 183XXX SL 192XXX Sealed Double row full compliment cylindrical roller bearingSL 0450XX

Suitable for

High stiffness applicationCarrying combined loadAccommodating pure axial load or pure radial loadImpact load carrying capacity

Types of Taper Roller bearings:

• Single row tapper roller bearings (also with seal on one side)
• Paired single row tapper roller bearings
• Double row tapper roller bearings
• Four row tapper roller bearings

ZNL Offerings :

Series Available 302XX 303XX 313XX320XX 322XX 323XX 329XX 330XX 331XX 332XX

INCH SERIESH, HL, HM, T4CB, JM, JL, LM, HH

Interchangeable components (Cup or Cone) can be manufactured for all Inch series bearings

This bearing contains solid outer ring, split inner ring and ball and cage assembly. Two-piece inner rings allow large complement of ball to accommodate. These bearings are not suitable for miss alignment in housing or shaft deflection. Also these bearings are not sealed.

ZNL Offerings:

• QJ2XX, QJ3XX
• QL, QM, LDJT & MDJT Series

Accommodating combined load and radial loadIn spherical roller thrust bearings the load is transmitted from one raceway to other at an angle to the bearing axis. The bearings are therefore suitable for the accommodation of radial loads. Another important characteristic of spherical roller thrust bearings is their self-aligning capability. This makes the bearings insensitive to shaft deflection and misalignment of the shaft relative to the housing.

Suitable for In spherical roller thrust bearings the load is transmitted from one raceway to other at an angle to the bearing axis. The bearings are therefore suitable for the accommodation of radial loads. Another important characteristic of spherical roller thrust bearings is their self-aligning capability. This makes the bearings insensitive to shaft deflection and misalignment of the shaft relative to the housing.

ZNL Offerings: 292XX, 293XX, 294XXAvailable in steel and brass cages

Suitable for:

Low, medium and high speed applicationLow maintenance applicationAccommodating bi-directional axial load Good running accuracy and low noise

ZNL Offerings:

• Single row deep groove ball bearings: 6800, 6900, 16000, 6000, 6200, 6300, 6400, 62000, 62300, 63000, 61800, 61900, 6200, 6300 - Also in EMQ [Electric Motor Quality]
• Double row deep groove ball bearings: 4200, 4300 with Z, 2Z shield and with Rubber seal RS, 2RS snap ring groove and snap ring
• For radial clearance C2, CN, C3, C4, C5
• As per ISO grade P0 ABEC1 And as per ISO Grade P6A BEC3
• Cage type riveted of steel and brass steel, machined brass cage, polyimide.
• Dimension as per ISO standard, DIN standard and ISI standard.
• RLS, RMS, XLJ Available

we deals in supplying of wide range of spherical roller bearings.

suitable for accommodating combined load and radial loadalso carrying bi-directional axial loadtake misalignments up to 2.5high load carrying capacity

znl offerings: 202xx, 203xx, 213xx, 222xx, 223xx, 230xx, 231xx, 232xx240xx and 241xx available in cylindrical and taper boreavailable in steel and brass cage

.

Suitable for:

Low or medium speed applicationCarry radial load, but not suitable for axial loads.Accommodating misalignments

ZNL Offerings:

• 1200, 1300, 1400, 2200, 2300 in C2, C3, C4 clearances

Suitable for:

High accuracy and high-speed applicationAccommodating combined load i.e. axial and radial loadHigh load carrying capacityQuiet and low friction

ZNL Offerings:

• Single row angular contact ball bearing: 7000, 7200, 7300, 7400(Available in Steel, Brass & Polyamide Cages)

• Double row angular contact ball bearing 3200, 3300, 5200, 5300

These bearings are combination of radial ball bearing, seal and housing of high-grade cast iron which conies in various shapes. The OD of the bearing and the internal surface of housing are spherical, because of this the unit is self-aligning. The radial load carrying capacity of this bearing is higher than that of the corresponding self-aligning ball bearing used for standard plummer blocks. Any misalignment of axis that arises from poor workmanship on the shaft or error in fitting will be properly adjusted.

Range (Inch & mm)UC - UCP - UCF - UCT - UCFC - UCFL 204 to 220UC - UCP - UCF - UCT 304 to 328

We are leading supplier of huge range of Ball Bearing.

We are well known for supplying of wide variety of Tapered Roller Bearing.

A prominent supplier of huge range of Cylindrical Bearings.

We deals in supplying of wide range of Pillow block bearing.

We are well known for supplying of wide variety of Automobile Bearing.