Our Products
Metal Scrap
2 Products availableSteel & Steel Products
2 Products availableNon Ferrous Metal Scrap
1 Products availableSteel Scrap
1 Products availableSteel Pipes
1 Products availableSeamless Pipes
1 Products availableOur offered Product range includes HRCS Scrap, Titanium, Incoloy Sheets, Stainless and Duplex Steel Pipe fittings and Carbon and Alloy Steel Pipe fittings.
Grades :-Inconel scrap, Inconel 625 scrap INVESTMENT CASTING INDUSTRY :-Scrap Suitable for Small Furnaces from 15kgs to 100 Kgs.Less in diameter and length for easy melt.Plate Cutting & Rod cuttings for better results.Free from oil, dirt, colour and any other foreign particles.Guaranteed chemical composition as per ASTM standards. SAND CASTING INDUSTRY:-Scrap suitable for bigger furnaces from 100kgs to 2 ton.Less in diameter and length for easy melt.Purely Foundry Grade scraps for induction furnaces & Casting units.Scrap for foundry industry is majorly plate cuttings, rod cuttings, pipe cutting, punching scrap etc. Different companies are catered according to their needs. MILLS :-Complete chemical composition guarantee of Nickel & Moley percentage.Scrap suitable for large furnaces.Maximum out put of the melt having less burning loss.
Being the market leader in this domain, we are actively affianced in offering our precious clients high quality Monel Scrap. Extensively used for various applications in different industries, the offered scrap is procured from the authentic vendors' of the industry. In order to ensure the quality at our clients' end, this scrap is offered in defect free range at cost effective prices and within the committed time-frame. Features:Corrosion resistanceDuctilityRecyclable Monel Alloys:Monel 400Monel 401Monel 404Monel K-500Monel R-405
Chemical Composition :
| esignation | Cu % | Al % | Ti % | Fe % | Mn % | Si % | Ni % |
| Monel 400 | 28-34 | - | - | 2.5 max. | 2.0 max. | - | 63 min. |
| Designation | Cu % | Al % | Ti % | Fe % | Mn % | Si % | Ni % |
| Monel K-500 | 27-33 | 2.3-3.15 | 0.35-0.85 | 2.0 max. | 1.5 max. | - | 63 min. |
| Designation | Cu % | Al % | Ti % | Fe % | Mn % | Si % | Ni % |
| Monel 405 | 28-34 | - | - | 2.5 max. | 2.0 max. | 0.5 max. | 63 min. |
Grades :-17-4 ph., 2304, 2205, 2507 INVESTMENT CASTING INDUSTRY :-Scrap Suitable for Small Furnaces from 15kgs to 100 Kgs.Less in diameter and length for easy melt.Plate Cutting & Rod cuttings for better results.Free from oil, dirt, colour and any other foreign particles.Guaranteed chemical composition as per ASTM standards. SAND CASTING INDUSTRY:-Scrap suitable for bigger furnaces from 100kgs to 2 ton.Less in diameter and length for easy melt.Purely Foundry Grade scraps for induction furnaces & Casting units.Scrap for foundry industry is majorly plate cuttings, rod cuttings, pipe cutting, punching scrap etc. Different companies are catered according to their needs. MILLS :-Complete chemical composition guarantee of Nickel & Moley percentage.Scrap suitable for large furnaces.Maximum out put of the melt having less burning loss.
Grades :-AHRCS 4 14, SS 309, 310, 310S. INVESTMENT CASTING INDUSTRY :-Scrap Suitable for Small Furnaces from 15kgs to 100 Kgs.Less in diameter and length for easy melt.Plate Cutting & Rod cuttings for better results.Free from oil, dirt, colour and any other foreign particles.Guaranteed chemical composition as per ASTM standards. SAND CASTING INDUSTRY:-Scrap suitable for bigger furnaces from 100kgs to 2 ton.Less in diameter and length for easy melt.Purely Foundry Grade scraps for induction furnaces & Casting units.Scrap for foundry industry is majorly plate cuttings, rod cuttings, pipe cutting, punching scrap etc. Different companies are catered according to their needs. MILLS :-Complete chemical composition guarantee of Nickel & Moley percentage.Scrap suitable for large furnaces.Maximum out put of the melt having less burning loss.
| Closest Equivalent Alloy | IS 4522 | Closest DIN 17445 | ASTM - A297 Gr | C % | Ni % | Cr % | Mo % | Si % | Mn% | others % | Applications |
|---|---|---|---|---|---|---|---|---|---|---|---|
| - | - | - | HA | 0.20 max | - | 8.00 - 10.00 |
0.90 - 1.20 |
1.0 max |
0.35 - 0.65 |
- | Good oxidation resistance upto 650oC. Used in oil refining industry. |
| HRCS 28/4 |
- | - | HC | 0.50 | 4.0 max |
26.0 - 30.0 |
0.5 max |
2.0 max |
1.0 max |
- | Good sulphur and oxidation resistance upto 10950C. Minimal load bearing capacity. |
| HRCS 5/28 |
Grade 4 | - | HD | 0.5 max |
4.0 - 7.0 |
26.0 - 30.0 |
0.5 max |
2.0 max |
1.5 max |
- | Can be used in high sulphur application (avoid at 700o-800oC) upto 1000oC. |
| HRCS 9/29 |
Grade 6 | - | HE | 0.20 - 0.50 |
8.0 - 11.0 |
26.0 - 30.0 |
0.5 max |
2.0 max |
2.0 max |
- | More ductile and higher corrosion resistance (avoid at 815oC) upto 1050oC for high S atmosphere. |
| HRCS 9/19 |
Grade 5 | 1.4825 | HF | 0.20 - 0.40 |
8.0 - 12.0 |
18.0 - 23.0 |
0.5 max |
2.0 max |
2.0 max |
- | Suitable for applications requiring high strength & corrosion resistance at 6500C to 8700C. |
| HRCS 12/25 |
Grade 7 | 1.4837 | HH | 0.20 - 0.50 |
11.0 - 14.0 |
24.0 - 28.0 |
0.5 max |
2.0 max |
2.0 max |
- | Suitable for applications between 9270C and 10930C. Not to be used from 7500C to 8900C and for operations invloving thermal shock & carburizing conditions. |
| HRCS 12/25 |
- | - | HH Type2 |
0.20 - 0.50 |
11.0 - 15.0 |
22.0 - 24.0 |
0.5 max |
1.75 max |
2.5 max |
- | Same as HH but with superior creep resistance and reduced ductility. Used from 650o C to 1000o C under constant temperature conditions. |
| HRCS 15/28 |
- | - | HI | 0.20 - 0.50 |
14.0 - 18.0 |
26.0 - 30.0 |
0.5 max |
2.0 max |
2.0 max |
- | Higher corrosion resistance and higher strength at temperature upto 1050oC (avoid 815oC). |
| HRCS 20/25 |
Grade 9 | 1.4848 | HK | 0.20 - 0.60 |
18.0 - 22.0 |
24.0 - 28.0 |
0.5 max |
2.0 max |
2.0 max |
- | Suitable for stressed parts working upto 1100o C such as billet skids, heat treating trays & fixtures. Unsuited at 815o C and in operations involving thermal shocks. |
| HRCS 20/25 |
- | 1.4848 | HK40 | 0.35 - 0.45 |
19.0 - 22.0 |
23.0 - 27.0 |
0.5 max |
1.75 max |
1.5 max |
- | Same as HK but with better creep strength. |
| AISI 314 |
- | - | - | 0.25 max |
19.0 - 22.0 |
23.0 - 26.0 |
- | 1.5 - 3.0 |
2.0 max |
- | Same as HK but Si increased for greater resistance to carburization. |
| HRCS HKNb |
- | - | HK40 Nb | 0.35 | 19.0 - 22.0 |
23.0 - 27.0 |
0.5 max | 0.5 - 2.0 |
1.5 max |
0.5 - 1.5 Nb | - |
| HRCS 24/24 Nb |
- | 1.4855 | IN519 | 0.25 - 0.35 |
23.0 - 25.0 |
23.0 - 25.0 |
0.5 max |
0.1 max |
1.0 max |
1.4 Nb | Same as HK 40 but with enhanced high temperature resistance upto 1025o C. |
| HRCS 29/20 |
Grade 10 | - | HL | 0.2 - 0.6 |
18.0 - 22.0 |
28.0 - 32.0 |
0.5 max |
2.0 max |
2.0 max |
- | Higher corrosion resistance and higher strength at temperature upto 1100oC (avoid 815oC). |
| HRCS 25/20 |
Grade 11 | - | HN | 0.20 - 0.50 |
23.0 - 27.0 |
19.0 - 23.0 |
0.5 max |
2.0 max |
2.0 max |
- | Suitable for applications upto 1100oC for furnace parts such as grates, etc. with increased ductility. |
| HRCS 32/20 Nb |
- | 1.4859 | Castalloy 800H |
0.10 - 0.15 |
30.0 - 33.0 |
19.0 - 21.0 |
0.5 max |
1.5 max |
1.5 max |
0.8 - 1.0 Nb | Suitable for manifolds and headers. Service limit upto 980o C with increased ductility. |
| HRCS 35/25 |
- | - | HP | 0.35 - 0.75 |
33.0 - 37.0 |
24.0 - 28.0 |
0.5 max |
2.5 max |
2.0 max |
- | Resistant to both oxidizing and carburizing atmospheres at high temperatures upto 1050o C. |
| HRCS 35/25 Nb |
- | 1.4852 | HP modified | 0.35 - 0.45 |
33.0 - 36.0 |
24.0 - 28.0 |
0.5 max |
1.2 max |
1.2 max |
0.5 - 1.0 W, 0.8 - 1.2 Nb |
Same as HP but with enhanced high temperature resistance upto 1100o C. Suitable for reformer ethylene furnace tubes, radiant tubes, etc. |
| HP-Mo | - | - | - | 0.35 - 0.45 |
33.0 - 36.0 |
24.0 - 28.0 |
1.0 - 1.5 |
1.6 max |
1.0 max |
- | - |
| HRCS 35/15 |
Grade12 | - | HT | 0.35 - 0.75 |
33.0 - 37.0 |
15.0 - 19.0 |
0.5 max |
2.5 max |
2.0 max |
- | Suitable for highly stressed parts upto 1095o C including for carburizing operations. High sulphur gases and thermal shocks are detrimental. |
| HRCS 39/19 |
Grade 13 | - | HU | 0.35 - 0.75 |
37.0 - 41.0 |
17.0 - 21.0 |
0.5 max |
2.5 max |
2.0 max |
- | Suitable for applications upto 1095o C including for carburizing operations. Can withstand corrosive applications with rapid thermal cycles. |
| 45/30 Nbw |
- | - | - | 0.40 max |
42.0 - 46.0 |
32.0 - 36.0 |
- | 1.0 max |
1.0 max |
0.5 W 0.5 Nb |
Useful for components operating in hot zone of pyrolysis coils and components of Reformer outlet manifold service limit 1150o C |
| 22H | - | 2.4879 | - | 0.35 - 0.45 |
48.0 - 52.0 |
27.0 - 29.0 |
- | 1.5 max |
1.5 max |
4.0 - 6.0 W | Same as HP but with enhanced high temperature resistance upto 1150o C. Suitable for radiant tubes, air injection tubes, reformer tubes and fittings for petrochemical furnaces, tube sheets, tube supports, etc. |
| Super 22H | - | - | - | 0.40 - 0.50 |
46.0 - 50.0 |
27.0 - 29.0 |
- | 2.0 max |
1.5 max |
4.0 - 6.0 W, 2.0 - 4.0 Co |
Same as 22H but with enhanced high temperature resistance upto 1180o C. |
| HRCS 60/12 |
- | - | HW | 0.35 - 0.75 |
58.0 - 62.0 |
10.0 - 14.0 |
0.5 max |
2.5 max |
2.0 max |
- | Excellent thermal shock resistance and resistance to carburisation up to 1040o C where sulphur is not present. |
| HRCS 66/17 | Grade 14 | - | HX | 0.35 - 0.75 |
64.0 - 68.0 |
15.0 - 19.0 |
0.5 max |
2.5 max |
2.0 max |
- | For severe service applications upto 1150o C where corrosion resistance is required. |
| Canalloy | - | - | - | 0.50 - 0.65 |
10.0 - 14.0 |
22.0 - 26.0 |
- | 1.75 - 2.25 |
1.5 max |
- | Bushes & sleeves for hot dip galvanizing line. |
| Canalloy Controlled Manganese | - | - | 0.65 max |
10.0 - 14.0 |
22.0 - 26.0 |
- | 1.75 - 2.25 |
0.75 - 1.50 |
0.03 S max 0.03 P max |
Bushes & sleeves for hot dip galvanizing line. | |
| UMCO-50 | - | - | - | 0.05 - 0.12 |
- | 27.0 - 29.0 |
- | 0.5 - 1.0 |
0.5 - 1.0 |
48.0 - 52.0 Co, Bal Fe |
Furnace parts in heat-treating furnaces, slag notch rings and tundishes. |
| Cobalt Alloy 6 | - | R30006 | - | 0.90 - 1.40 |
3.0 max | 28.0 - 32.0 |
1.5 max |
2.0 max |
2.0 smax |
3.0 Fe max, 3.5 - 5.5 W, Bal Co |
Wear plates and bars, bushes & sleeves for operation in hot & corrosive atmosphere, where lubrication is impossible, with superior performance. |
| Cobalt Alloy 12 | - | R30012 | - | 1.70 - 2.00 |
1.5 max |
27.0 - 32.0 |
- | 0.7 max |
2.5 max |
7.5 - 9.5 W, 3.0 Fe max, Bal Co |
Cutting tools and bushes & sleeves for operation in hot & corrosive atmosphere, where lubrication is impossible, with superior performance. |
| Cobalt Alloy Special | - | - | - | 1.10 - 1.40 |
- | 26.0 - 28.0 |
- | 1.8 - 2.2 |
0.4 - 0.8 |
63.0 - 67.0 Co, 4.0 - 5.0 W, 2.0 Fe max |
For better sliding wear property. Hardness is between 375 to 432 HRB. |
| 40 Ni 60 CrNb |
R20600 | - | ASTM A560 Gr 40/60 Nb |
0.10 max |
Balance | 58.0 - 62.0 |
- | 1.0 max |
0.3 max |
0.02 P max, 0.02 S max, 0.3 N max, 1.0 Fe max, 0.5 Al max, 0.25 Nb max |
- |
| 50 Ni 50 CrNb |
- | 2.4680 | ASTM A560 Gr 50/50 Nb |
0.10 max |
Balance | 47.0 - 52.0 |
- | 0.5 max |
0.3 max |
1.4 - 1.7 Nb, 0.02 P max, 0.02 S max, 1.0 Fe max |
Suitable for applications upto 9500 C in furnace parts. Can withstand fuel ash corrosion. Good creep strength and good resistance to oxidation and carburization. |
| 60 Ni 40 CrNb |
- | - | ASTM A560 Gr 60/40 Nb |
- | - | - | - | - | - | - | For heat resisting and elevated temperature corrosion resistance application such as tube hangers. |
| CY-40 (70Ni15Cr) | - | - | ASTM A494 Gr CY-40 |
0.35 - 0.45 |
Balance | 14.0 - 17.0 |
- | 3.0 max |
1.5 max |
11.0 Fe max | Frequently used for elevated temperature fittings in conjunction with Inconel. Suitable for boiler feed water plants and where high strength, high resistance to wear, corrosion and oxidation at elevated temperatures is required. |
Hastelloy Scrap is composed of nickel and several other elements (chosen depending on the type of Hastelloy scrap) including chromium, iron, molybdenum, cobalt manganese, copper, titanium, aluminum, zirconium, tungsten and carbon. There are several grades of this scrap, each having specific uses. For instance, Scrap Hastelloy C 276 is used for shaping Plate Cut, Pipe Cut, etc. Even as they have specific uses, the grades have common physical properties. To elaborate further, almost all the grades can be used in tough and fluctuating temperature environments, dont get affected because of the harsh corrosive conditions, and are excellent resistant to salt and acid.To buy Hastelloy Scrap having all the above-mentioned properties, contact us any time. We, Prayas Metal India Pvt. Ltd., can meet bulk requirements. As well, we can virtually any grade according to the specific requirements mentioned by the buyers, that too at reasonable price.
Chemical Composition :
Ni% 57Cr% 16Mo% 170.15
We supply a wide range of precisely engineered stainless steel pipes & tubes, made in compliance with international quality and safety standards. Our range comprises of stainless steel welded pipes & tubes. Available in different dimensions & grades, these stainless steel welded tubes and pipes are widely used in different industries like power, engineering, construction and many more. We offer products at highly competitive prices and deliver consignment within stipulated time .
Range: 15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS. Form: Seamless / Erw / Welded in Round & Square . Stainless Steel : ASTM / ASME SA 312 GR. TP 304 , 304L , 304H, 309S , 309H , 310S, 310H , 316 , 316TI , 316H , 316 LN , 317 , 317L , 321 , 321H , 347 , 347 H , 904L .ASTM / ASME SA 358 CL 1 & CL 3 GR . 304 , 304L , 304H, 309S , 309H , 310S, 310H , 316 , 316H , 321 , 321H , 347 . Duplex Steel : ASTM / ASME SA 790 UNS NO S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Range :15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS Form :Seamless / Erw / Welded in Round & Square . Carbon Steel : ASTM / ASME A 53 GR. A , B ASTM / ASME 106 GR. A , B , C . API 5L GR. B , API 5L X 42 , X 46 , X 52 , X 60 , X 70. ASTM / ASME A 691 GRA , B , C Alloy Steel: ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
The salient features are as follows :
Grades : Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23 Type: Seamless / Erw / Welded/ Fabricated Range : 15 NB UP TO 600 NB IN SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 etc.Form Round, square, rectangular, hydraulic etc.Length Single Random, Double Ranidom & Cut LengthEnd Plain End, Bevelled End, Treaded
Grades : Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23 Range : 15 NB up to 1500 NB in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS available with NACE MR 01-75 Standard : ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE Types : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring Joint Features:Dimensional accuracyHigh strengthDurabilityCorrosion resistanceExcellent finish
Range :0.1 mm to 100 mm thick upto 2500 mm width & upto 8000 mm length available with NACE MR 01-75s. Stainless Steel : ASTM / ASME SA 240 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 317L , 321 , 321H , 347 , 347 H , 409 , 410 , 410S , 430 Duplex Steel :ASTM / ASME SA 240 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Range :0.1 mm to 100 mm thick upto 2500 mm width & upto 8000 mm length available with NACE MR 01-75s. Stainless Steel : ASTM / ASME SA 240 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 317L , 321 , 321H , 347 , 347 H , 409 , 410 , 410S , 430 Duplex Steel :ASTM / ASME SA 240 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Sheet and Plates Range :5 mm to 100 mm thick in upto 2500 mm width & upto 6000 length available with NACE MR 01-75s. Nickel Alloy :ASTM / ASME SB 162 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )ASTM / ASME SB 127UNS 4400 (MONEL 400 )ASTM / ASME SB 424 UNS 8825 (INCONEL 825)ASTM / ASME SB 168UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )ASTM / ASME SB 443 UNS 6625 (INCONEL 625)ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )ASTM / ASME SB 462 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Sheet and Plates Grades : Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS Type: Seamless / Erw / Welded/ Fabricated Standard : ASTM B407, ASTM B829, ASTM B514, ASTM B775, ASTM B515, ASTM B751
This range is used in :Petrochemicals Plants Oil Refineries Fertilizers Plants Sugar Mills Chemical Plants Pharmaceuticals Textile Machinery
Sheet and Plates Specifications 1)hot and coll rolled, Gr1Gr23 2)Thickness:0.3mm - 60mm 3)Length:6000mm4)ASTM B265, ASTM 4911, F67, F136 Material :titanium and titanium alloys Pure Titanium Grade : GR1, GR2, GR3, GR4 Titanium Alloy Grade : GR5 (6% Al, 4%V)GR6 (5% AL, 2.5%Sn)Gr.7 (Titanium + Pd)Gr.9 (3% Al, 2.5%V)Gr.10 (11.5%Mo, 6% Zr, 4.5% Sn)Gr.11 (Titanium + Pd)Gr.12 (0.3% Mo, 0.8% Ni)
| Common Specification | Specification | Product Form |
| ASTM B265(Gr2 | Sheet,Strip and Plate | |
| ASTM B338 | Tube,Seamless and Welded | |
| ASTM B348(Gr2) | Bars and Billets | |
| ASTM B861 | Seamless Pipe | |
| ASTM B863 | Wire | |
| ASTM F67(Gr2) | Unalloyed Titanium for Surgical Implants |
Specifications : tantalum sheet, tantalum plate, tantalum foil Grade: RO5200, Ro5400, RO5252, RO5255 Standard :ASTM B708-98 Size:T0.1-10.0mmWe are factory specializing in the manufacture and export Tantalum and Niobium prodcut for more than ten years, Including foil tube , rod, wire, sheet, plate, , rod, strip, target and so on We can supply the best quallity and low price. Tantalum sheets, Tantalum- tungsten alloy sheets(Ta2.5W, Ta10W) Purity : 99.95%min or 99.99%min conformity with ASTM B 708 98
Size:
| Thickness (mm) | Width (mm) | Length (mm | |
| Foil | 0.03-0.09 | 30-600 | 100 |
| Sheet | 0.1-0.5 | 30- 609.6 | 30-1000 |
| Board | 0.5-10 | 50-1000 | 50-2000 |
15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS.
Seamless & Welded Long Radius & Short Radius Elbow 90 Deg , Long Radius Elbow 45 Deg , Long Radius & Short Radius Elbow 90 Deg , Long Radius Elbow 45 Deg , Long Radius & Short Radius Elbow 180 Deg ( Return Bend ) , Reducing Elbow , Equal Tee , Un Equal Tee, Crosses , Concentric Reducer , Eccentric Reducer , Long Stubend , Short Stubend , Coller , Pipe Cap , Long Radius Bends R =3 D , 5 D , 6 D , 8 D , 10 D & 20 D In 15 Deg , 30 Deg, 60 Deg & 90 Deg And Drawing Bassed Butt Weld Fitting ( Customised ).
ASTM / ASME SA 403 GR WP "S" / "W" / " WX" 304 , 304L , 304H, 304N , 304LN , 309, 310H , 316 , 316H , 317 , 317L , 321 , 321H , 347 , 347 H
ASTM / ASME SA 815 UNS NO.S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Range :15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS. Form : Seamless & Welded Long Radius & Short Radius Elbow 90 Deg , Long Radius Elbow 45 Deg , Long Radius & Short Radius Elbow 90 Deg , Long Radius Elbow 45 Deg , Long Radius & Short Radius Elbow 180 Deg ( Return Bend ) , Reducing Elbow , Equal Tee , Un Equal Tee, Crosses , Concentric Reducer , Eccentric Reducer , Long Stubend , Short Stubend , Coller , Pipe Cap , Long Radius Bends R =3 D , 5 D , 6 D , 8 D , 10 D & 20 D In 15 Deg , 30 Deg, 60 Deg & 90 Deg And Drawing Bassed Butt Weld Fitting ( Customised ). Carbon Steel : ASTM / ASME A 234 WPB , WPC ASTM / ASME A 860 WPHY 42 , WPHY 46 , WPHY 52 , WPH 60 , WPHY 65 & WPHY 70 . Alloy Steel : ASTM / ASME A 234 WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 23, WP 91
Grades :Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Standard :ASTM / ASME SB 564 Types : Elbow - 90 Deg. & 45 DegTee - Equal & ReducingUnion, Cross, Coupling - Full & HalfSocket Reducing, CAP, Plug-Hex & Square, Nipples (Hex/Reducing), Bushing, Sockolet, Weldolet, Thredolet, Elbolet, Nipolet
