Vadodara, Gujarat, India
Verified
Add Review
Our Products
We offer the best product range of Algae Resistant Aeration Tube, Airoxi Star Tube, Aeration Tube Yellow Line, Blue Airoxi NC -16 Aeration Tube and Airoxi Aeration Tube Extra.
AirOxi Star with micro holes giving fine bubbles, but only in half the tube circuference so you get good pressure and movement, low blocking
Aeration Tube Yellow Line - Size 12.5 X 22.5mm These are specially designed tubes to work with ring blowers. Low thickness of tube ensures that low pressure pumps like single stage ring blower and air pump also perform well.
AirOxi smooth low blocking tube - low wall thickness, low cost and relatively bigger bubble size. The oxygen dissolution % is lower, but the tube is very easy to clean and maintain if at all any maintenance is needed
AirOxi aeration tube manufactures the highest quality Aeration tubes in 3 major sizes / options.
1) High efficiency aeration tube of size 12.5 mm x 25 mm (0.5" x 1") seen but its characteristic blue line. This is the most popular product and as per international specifications
2) Algae Resistant Aeration tube of the same size but mild algae resistant additives added for ponds that have problems of high algae sticking and clogging the tube
3) High Airflow large size tube of size 1" x 1.5" - extremely high air flow with double the inside diameter, 4 times the flow area and 50% more circumference, to get small bubble size and very high aeration and efficiency.
Please contact us for more details of each type of aeration tube. We can also make specific size to order
High Flow Aeration Tube- Depends on blower size and output. At 2 PSI pressure and 1 mtr water head, Average flow rate per mtr is approximately 800 ltrs/ hour (0.8 m3 / hr). However since bursting is not a concern, the air flow can increase as high as required by increasing blower and motor size. This is not however useful for aeration purpose since the flow will be too high to have any meaningful dissolution of air.
High efficiency aeration tube of size 12.5 mm x 25 mm (0.5" x 1") seen but its characteristic blue line. This is the most popular product and as per international specifications
AirOxi Micro Bubble Generator is the ideal product for low power low noise product for Nursery and RAS aquaculture systems
