PPI Projects Pvt. Ltd.

Dwarka, Delhi

Wet scrubbers are used as pollution control unit to minimize toxicity of the flue gas and other gases. For the wet scrubber, scrubbing liquid is used to eliminate pollutants. Dust particles are eliminated with liquid droplets. For various industrial applications, we offer different designs options to suit your need.
With advance fabrication facilities we offer total turnkey projects with cost-effective range. We use mild steel to manufacture wet scrubber unit. Our unit is also available with total FRP and PP material. We also provide customized design units with suitable material of construction for the wet scrubbers. We make use of the higher lining materials likes FRP, zinc coating and rubber lining.

Our range of air handling units are available in double skin and single skin. These are widely used in pharmaceutic units, clean room, shopping mall, hospital, commercial center, call center, industrial ventilation, air cooling and other allied places. Some of the general specifications of our range are:

• Available type- Horizontal /vertical /ceiling suspended.
• Double/single skin/double decker.
• Capacity of 400 CFM to 50000 CFM.
• Static pressure range from 25 mm to 150 mm of Wg.
• MOC-Inner skin of.6 mm thick pre coated.
• Outer skin.of 6 MM thick GI plain.
• Panel thickness of 25 mm and 50 mm.
• Infill between panel-sandwich construction with CFC free PUF insulation.
• Frame work-Extruded aluminum profile with nylon fitting.
• Base frame -GSS Frame.
• Coil- 4 / 6 / 8 / 2 row copper tube with aluminum fins.
• Drain-Aluminum/SS/GI
• Motor-ABB/semens make 3 phase motor.
• Fan-Forward and backward fan imported fan.
• Filters-50 MM thick pre filter and 300mm fine and HEPA filter.

Refrigeration and HVAC Requirements

•       Cleanliness of class 100.000 (ISO 8) is frequently prerequisite.
•       Room overpressure is always necessary in order to exclude ingress of external air to the production suite.
•       Proper temperature control and mainly area cooling is an important need because many products, and especially the creams, contain substances which are vulnerable to heat.
•       Relative humidity control is important especially in dry, powder-form products.
•       Chilled water or glycol brine for products cooling is in many applications demanded. The designed refrigeration system which will cater for the product cooling must have adequate stored cooling capacity to accommodate for the high load peaks which are frequent in cosmetics production.

Features :

• Effective filtration of air .
• Optimal disinfection of air.
• Effective air routing and removal of
• spent or contaminated air.
• Energy-saving transport of air.
• Provision of the required relative humidity.
• Cooling of production halls.

PPI offers food professionals an innovative training curriculum that builds upon and enhances their company’s existing food safety management schemes and in-house training programs, providing the tools needed to address today’s ever-evolving food safety challenges.

Features :

• Ceiling air outlets.
• Sidewall air outlets.
• Floor air outlets.
• Displacement outlets.
• Air outlets for assembly rooms.
• Volume flow controller.

Features :

• HEPA filter air outlets.
• Ventilation and air-conditioning systems for hospitals.
• Supply air ceiling and recirculated air ceiling for operating rooms.
• Fibre filter.
• Dissection outlet.
• Filter Fan Units.
• Clean work stations.

Features :

• Metal, gypsum board and plaster ceiling systems.
• High-capacity ceiling systems.
• Chilled sails.
• Chilled beams.
• Facade/Floor-mounted systems.
• Wall-mounted systems.

Features :

• Modular ceiling and wall panel EGP sheet.
• Control panel.
• Manual Hermetically sealed door.
• Laminar flow.
• Pressure relief Damper.
• LED X-ray view panel.
• Seamless conductive flooring.
• Motorized view window.
• Single arm movable pendent.
• Scrub Sink.
• Hatch Box.
• Fixed pendent.
• ICU
• ICU Curtain Sytem

Why Modular OTControl the temperature and humidity Assist in the removal and dilution of waste Anesthetic Gases Dilute airborne bacterial contamination Control The Movement of Air Within the department Maintain Class 100 in the sterile area

Super Specialty OT Super Specialty OT means operations of Neurosciences, Orthopedics (Joint Replacement), Cardiothoracic and Transplant Surgery (Renal, Liver etc)

General OTGeneral OT includes Ophthalmology and all other basic surgical disciplines. District hospital OTs and FRU OT  would fall underthis category

Components of Modular OT

• Modular ceiling and wall panel EGP sheet
• Control panel
• Manual Hermetically sealed door
• Laminarflow
• Pressure relief Damper
• LED X-ray view panel
• Seamless conductive flooring
• Motorized view window
• Single arm movable pendant
• Scrub Sink & Hatch Box
• Fixed pendent
• ICU curtain system

Today's automotive paint shop is a key focus area within the manufacturing process. Understanding the complexities and interrelationship of the process parameters is critical to developing an efficient and cost-effective environment. Humidity and temperature control, paint flow, viscosity, and body temperature are just a few of the areas that factor into a smoothly run facility. Working with PPI Projects you can receive best-practice knowledge and technology regarding:

• Achieving consistent quality with improved painting technologies.
• Relieving competitive pressure to improve quality at less cost.
• Compliance with environmental regulations, such as the Clean Air Act.
• Compliance with safety including personnel, solvents, and combustion.
• Supply chain efficiency – delivering painted bodies in the right sequence.

Features :

• Static pressure range from 25 mm to 150 mm of Wg.
• Outer skin.of 6 MM thick GI plain Precoated.
• Infill between panel-sandwich construction with CFC free PUF insulation.
• Frame Work- Extruded aluminum profile with nylon fitting.s
• Coil- 4 / 6 / 8 / 2 row copper tube with aluminum fins.
• Drain-Aluminum/SS/GI
• Motor-ABB/semens make 3 phase motor.
• Filters-50 MM thick pre filter and 300mm fine and HEPA filter.

Features :

• Offered Horizontal /vertical /ceiling suspended.
• Double/single skin/double decker.
• Static pressure range from 25 mm to 150 mm of Wg.
• Outer skin.of 6 MM thick GI plain Precoated.
• Infill between panel-sandwich construction with CFC free PUF insulation.
• Frame work-Extruded aluminum profile with nylon fitting.
• Coil- 4 / 6 / 8 / 2 row copper tube with aluminum fins
• Drain-Aluminum/SS/GI
• Fan-Forward and backward fan imported fan
• Filters-50 MM thick pre filter and 300mm fine and HEPA filter

Monitoring & control of all critical parameters such as temperature , humidity, pressure and air volume. Management of all interlocks of all critical parameters is also provided. The entire system is built in compliance with GMP, FDA & WHO requirements.

PPI specializes in execution of HVAC application in the field of clean room technology as well. Besides production of modular component system for clean rooms PPI is a producer of HVAC equipment and process systems. Hygienic version of air handling units is an integral part of PPI productions.

These are widely used in textile mills, paper, tea garden and green house / poultry sheds. Our air washer systems provide solutions for various ventilation requirements for industrial & commercial establishments.
We offer standardized air washers in modular designs and constructed using pre-fabricated tank and panels. Our range of air washer are used to wash and humidify the air without the use of evaporator mats. Special humidifier discs turn through water constantly.
This method removes many impurities like dust, pollen and particle-bound odors from the air. The range of our air washers are equipped with an anti-microbial protection system which insures hygienically cleaned air through out.

•       Available type- Horizontal /vertical /ceiling suspended.
•       Double/single skin/double decker.
•       Static pressure range from 25 mm to 150 mm of Wg.
•       MOC-Inner skin of.6 mm thick pre coated.
•       Outer skin.of 6 MM thick GI plain.
•       Infill between panel-sandwich construction with CFC free PUF insulation.
•       Frame work-Extruded aluminum profile with nylon fitting.s
•       Coil- 4 / 6 / 8 / 2 row copper tube with aluminum fins.
•       Drain-Aluminum/SS/GI
•       Motor-ABB/semens make 3 phase motor.
•       Fan-Forward and backward fan imported fan.
•       Filters-50 MM thick pre filter and 300mm fine and HEPA filter.

If you are looking for office building construction services from New Delhi (India), then feel free to contact PPI Projects Pvt. Ltd. We are an approved builder and developer in the national capital region, with years of experience in constructing office buildings of from single storey to the multi-storied ones. We have a pool of qualified as well as skilled manpower, who ensure seamless construction and development of official buildings across India.

PPI Projects Pvt. Ltd. is one of the acknowledged hospital building construction services providers from New Delhi. We can construct hospital buildings of different architectural specifications and designs with high-quality building construction materials. Our qualified professionals as well as skilled manpower leave no stone unturned in assuring that robust hospital buildings are constructed by us. They ensure sheer precision at every stage of construction and they maintain impressive speed to ensure timely construction of the hospital building.

Based in New Delhi (India), PPI Projects Pvt. Ltd. offers industry’s finest hospital lab construction services so that clients can not only have robust building structures but also a lab friendly building design and facility. Apart from technical know-how, we use modernistic equipment and tool to construct lab buildings up to our clients’ satisfaction. We have a team of qualified professionals as well as skilled people, who specialize in constructing lab buildings with precision and perfection.

PPI Projects Pvt. Ltd. is a New Delhi (India) based company that is widely known for its matchless commercial lab construction services. We specialize in designing and constructing commercial lab as per the client’s specifications and requirements. We have immense exposure and years of experience in constructing commercial labs for commercial as well as other kinds of research and development works. We undertake and complete all kinds of commercial lab construction works with greater efficiency and perfection.

PPI Projects Pvt. Ltd. is a New Delhi (India) based company that is engaged in providing operation theater construction services. We have access to the advanced equipment, and our team is inclusive of qualified professionals as well as skilled manpower to construction operation theatres with perfection and resourcefulness. We are well-versed with the requirements of operation theatres, and when rendering the contraction services we make proper provisioning of essential things so that a full-fledged OT can be constructed.

The Detailed Feasibility Report will help you to arrive at a well thought, techno commercial decision to proceed with most viable project plan.
A Master Plan, also called a comprehensive plan, provides a long-term vision for the built environment of a Pharmaceuticals Factories and Laboratories. It guides the appropriate use of lands in order to Plan and envisage future growth potential. As a result, the Master Plan has a direct relationship to the growth of organization.
PPI Projects has an Expert team of Architects and Designers to Make Futuristic Master Plan to identify:

• Suitable locations for Manufacturing, Administration Research & Development and Utilities.
• Green Belt and Environment management. 
• Opportunities to extend and/or improve open space, recreational areas, and civic facilities

• Strategies for Future development
  • Why should a Master Plan beimportant to you?
  • The simple answer is that a Master Plan is important because it affects Future growth plan.

• Master Plan helps to adopt new manufacturing technologies.
• Pharmaceuticals Manufacturing is very dynamic and the master plan helps you to device compliance th future GMP Standards.

PPI Projects can provide its customers with a complete feasibility study comprising of:

• Market Study
• Technical Study
• Financial Study

The studies conducted will rely on both primary and secondary data, which will involves both desk and field works. Accordingly, the typical approach employed for such studies includes followings:

• Key Project Goals Personnel Requirement
• Licensing and Regulatory Requirements
• Production Capacity
• Production Budget
• Total Investment Cost
• Annual Income Forecast
• Annual Cost of Production
• Net surplus
• Business valuation
• Income statement

Project management in our field of operations consists of the application of knowledge, abilities, tools and techniques enable us to complete project activities in order to satisfy customer requirements and thus accomplish the final goal with efficacy and efficiency.

The Project management functions include:

• Project Structure
• Project Scheduling and Monitoring
• Propose cost and safety measures during detailed engineering
• Technical assistance in getting statutory approvals
• Checking availability of design information
• Detailed Project Review
• Propose cost and safety measures during detailed engineering
• Conduct periodic co-ordination meetings with Client to review actual progress of work as against planned work schedule and remove bottlenecks
• Carrying out mechanic stallations, commissioning and validation.

Our Project Management team is geard up to monitor every individual project with following key areas:

• Project Scope Management
• Project Integration Management
• Project Time Management
• Project Communication Management
• Project Risk Management
• Project Procurement Management
• Project Human Resources Management
• Project Cost Management
• Project Quality Management

I. Advisory Services

• cGMP (current Good Manufacturing Practice) compliance
• Advisory services to queries pertaining to Pharma GMP, GLP, QA and regulatory affairs
• Compliance audits as per current and updated statutory Pharma regulations
• GAP Analysis/Due diligence
• Schedule 'M' Requirements & documentation for compliance to Indian FDA's norms

II. Technical Assistance

• Site Master file as per PIC/s & Local FDA requirement
• Quantitative Risk Assessment (QRA)
• Environment Impact Assessment (EIA)
• Safety Audits.
• Energy Audits

PPI Projects Pvt. Ltd. is a New Delhi (India) based organization that offers premium instrument calibration services. Our learned calibration engineers excel in ensuring that instruments and machines are calibrated with sheer perfection and efficiency so that the deviations among standard readings and the highest tolerance range could be abolished. Our engineers ascertain that all the incorrect measurements are duly noted and removed, and matched with the standard readings to ensure that instruments work impeccably.

If you are planning to install HVAC System at your commercial or industrial premises, and need HVAC system design services for the same, then do come to PPI Projects Pvt. Ltd. once. We are a prestigious HVAC system design service from New Delhi (India) having served a number of clients for their HVAC system design and installation requirements. We have a pool of qualified HVAC engineers, who can design HVAC systems as per the client’s building or structure requirements.

When it comes to documentation validation in India, then a number of clients prefer the documentation validation services offered by PPI Projects Pvt. Ltd. due to their effectiveness and affordability. Based in New Delhi (India), we are backed with necessary technical know-how as well as competent manpower that enable us to ascertain an impeccable validation of documents as per engineering guidelines. The entire process of document validation is managed by a panel of experts.

Commissioning Validation includes the following:

• Generation of User requirement sheets
• Design Qualification
• FAT ( Factory Acceptance Test)
• Installation Qualification
• SAT ( Site Acceptance Test)
• Operation Qualification
• Performance Qualification
• VMP (Validation Master Plan)
• SMF (Site Master File)
• GMP Auditing and Gap Analysis.
• Protocol Development & execution
• Standard Operating Procedures (SOP)

The automobiles ventilation solution from the house of PPI Projects Pvt. Ltd. has been immensely praised for being eco-friendly, effective, and affordable. Based in New Delhi (India), the company is acknowledged for its matchless expertise in ensure proper ventilation in the automobile vehicles. We ensure flexibility in designing as well as the installation of the ventilation system in an automobile vehicle.